Abstract:The rotordynamic stability evaluation by measuring the damping ratio or log-dec of the first forward whirl mode in the shop test is of importance to reduce the risk of instability fault in field. This paper focuses on the signal processing of inverse Fourier transform based on the full spectrum technique to reduce the modal overlap of closely-spaced first order modes (in which the amplitudes of the forward and backward responses are comparable) in the time domain. By using this transform method, forward and backward whirl signals are obtained, and blocking excitations in x or y direction can also achieve the same effectiveness as the forward and backward excitation with the active magnetic bearing (AMB) when there is a significant crosscoupled stiffness (CCS). The envelope of the analytical signal obtained by Hilbert transform is used to analyze the component of the excited vibration and show the effectiveness of weakening the overlap of the closely -spaced twin modes. The resultfrom the numerical investigation indicates that for the rotor-bearing system with a significant CCS, the constructed forward and backward whirl signals are clearly dominated by the respective forward and backward modes with no significant overlap. Besides, experiments are also carried out in a nearly industrial centrifugal compressor test rotor with AMB, which is used as an actuator to apply blocking excitations for rotordynamic stability tests, with result that the unidirectional excitation is enough to estimate the log-dec of the rotor system with a slight CCS. Thus, the traditional circular forward/backward whirl excitation and its associated complicated equipment such as AMB is unnecessary and replaceable, providing a sight to simplify the complicated equipment only by using the signal processing techniques when the rotating machinery has an either slight or significant CCS.

Instantaneous Frequency Extraction of Backward Whirl during Touchdown Process of Magnetic Bearing Based on GLCT

Frequency Analysis of the Orbit Responses of Active Magnetic Bearings in Touchdown Using Hilbert Transform

Analysis of Bearing Vibration Characteristics Using Hilbert-Huang Transformation

A New Procedure for Extracting Fault Feature of Multi-Frequency Signal from Rotating Machinery

The HHT-based Analysis of Rotor Running Across Critical Rotating

Orbit Response Recognition During Touchdowns by Instantaneous Frequency in Active Magnetic Bearings

A Control Method of the Rotor Re-Levitation for Different Orbit Responses During Touchdowns in Active Magnetic Bearings

Dynamic and Thermal Investigations of the Forward Dry-Friction Whirl/Whip of a Vertical Rotor-AMB System During Touchdowns

Adaptive tacholess order tracking method based on generalized linear chirplet transform and its application for bearing fault diagnosis

An Identification Method of Orbit Responses Rooting in Vibration Analysis of Rotor During Touchdowns of Active Magnetic Bearings

Self-sensing active magnetic bearing using Hilbert transform

Dynamic Behavior Analysis of Touchdown Process in Active Magnetic Bearing System Based on Kalman Filtering

Improved High Resolution Estimation Approach for Rotor Fault Diagnosis

An Improved Time-Frequency Analysis Method for Instantaneous Frequency Estimation of Rolling Bearing

Wavelet-Enhanced Time-Frequency Analysis Method for Bearing Fault Detection of Rotating Machinery

Roll angular rate extraction based on modified spline-kernelled chirplet transform

ROTORDYNAMIC STABILITY EVALUATION WITH CONSTRUCTED FORWARD WHIRL SIGNALS BASED ON FULL SPECTRUM TECHNIQUE: NUMERICAL AND EXPERIMENTAL INVESTIGATION

Instantaneous Frequency Synchronized Generalized Stepwise Demodulation Transform for Bearing Fault Diagnosis

Analysis of the dry whirl and dry whip response in a vertical active magnetic bearing drop test rig

Dynamic Behavior Analysis of Touchdown Process in Active Magnetic Bearing System Based on a Machine Learning Method

Preliminary Study on Recontrol Evaluation of a Magnetic Bearing Rotor Falling on Touch-Down Bearings