Abstract:<p>Removal of highly dispersed suspended solids (SS) from process water is critical for the sustainable production of iron ore dressing. However, it is difficult to handle high SS content process water that has multiple silicate components in a strongly dispersed system efficiently, using conventional flocculants alone. In this work, we compared the sedimentation performance and underlying mechanisms applicable when dosing suspended silicate minerals with different polyacrylamides (PAMs), and assessed the feasibility of a robust method using anionic PAM and calcium ions to remove SS. Preliminary analysis indicated that the main constituents of the SS were ultrafine quartz and chlorite particles, which severely interfered with separation behavior. Different PAMs exhibited diverse flocculation effects on chlorite and quartz, whereas only the combination of anionic PAM and calcium ions flocculated them effectively and simultaneously. Results from zeta potential and Fourier-transform infrared spectroscopy (FTIR) measurements suggested that flocculation was mainly affected by the affinity between the charges on the mineral surface and flocculant functional groups. Calcium ions acted as an activator for the adsorption of anionic PAM onto the quartz surface, through a chemical bridging effect. Response surface methodology (RSM), incorporating Box–Behnken design, was performed to explore the effects of reagent dosage and SS content on separation indices. Field application of this model in Sijiaying Iron Ore Mine, China, allowed optimal conditions to be established, which were 2.86 mg/L anionic PAM and 213 mg/L CaCl<sub>2</sub>, at pH 11. After applying these modifications, the quality of the process water became acceptable for long-term reuse, and higher grade (65.10%) and recovery (68.50%) were achieved. The proposed flocculation method and the main conclusions from our work can provide information and advice for similar low-grade iron ore mines.</p>

Comprehensive reutilization of iron in iron ore tailings: preparation and characterization of magnetic flocculants

Optimizing iron separation and recycling from iron tailings: A synergistic approach combining reduction roasting and alkaline leaching

Transforming Mining Waste to Wealth: A Novel Process for the Sustainable Recovery and Utilization of Iron Tailings through HCl Leaching and MOFs Absorption

Landfill Leachate Pretreatment by Coagulation–flocculation Process Using Iron-Based Coagulants: Optimization by Response Surface Methodology

High‐efficiency Preparation of Fe–Al Based Flocculants from Red Mud by Microwave Selective Carbothermic Reduction and Magnetic Separation

A novel iron-based composite flocculant for enhanced wastewater treatment and upcycling hazardous sludge into trifunctional electrocatalyst

Reuse of Iron Ore Tailings by Magnetic Separation Using Functionalized Magnetic Particles

Review of resource utilization of Fe-rich sludges: purification, upcycling, and application in wastewater treatment

Iron Recovery from Iron Ore Tailings by Direct Hydrogen Reduction at Low Temperature and Magnetic Separation

Unlocking the potential of iron ore tailings in controlled low-strength material: Feasibility, performance, and evaluation

Efficient enrichment of iron concentrate from iron tailings via suspension magnetization roasting and magnetic separation

Innovative Methodology for Comprehensive Utilization of Iron Ore Tailings: Part 1. the Recovery of Iron from Iron Ore Tailings Using Magnetic Separation after Magnetizing Roasting.

Preparation of Fe3O4@C with water treatment residuals and its potential in the magnetic coagulation process

Efficient immobilization and utilization of chromite ore processing residue via hydrothermally constructing spinel phase Fe2+(Cr3+X, Fe3+2-x)O4 and its magnetic separation

Production of Lightweight Ceramisite from Iron Ore Tailings and Its Performance Investigation in a Biological Aerated Filter (BAF) Reactor

Innovative treatment of industrial effluents through combining ferric iron and attapulgite application

Study on the Effect of Flocculation and Sedimentation on the Mechanical Properties of Iron Tailing Sand

Treatment and reuse of process water with high suspended solids in low-grade iron ore dressing

Mechanical Properties and Hydration Mechanism of Iron Tailings–Cement-Based Supplementary Cementitious Materials

Innovative Development on Agglomeration of Iron Ore Fines and Iron Oxide Wastes

A comparative study of different iron minerals on phosphorus capture from municipal wastewater and subsequent recovery as vivianite through acidogenic fermentation