Abstract:Debris flows are classical two-phase flows that can be enhanced by entraining multi-grain sizes of sediments from the bed as they rush down steep slopes, in which particle segregation is related to assessing the potential hazards. However, understanding the characteristics and fluid-particle interaction mechanisms remains challenging. Here an existing depth-averaged two-phase continuum flow model is further improved by incorporating the effects of pore-fluid pressure and bed sediment conditions on erosion. To demonstrate its reliability, we compare numerical solutions with measurements of thickness, front location, and bed deformation in two sets of USGS large-scale experimental debris flows over erodible beds. The following physical understandings are obtained. First, the positive effects of pore-fluid pressure and coarse bed materials on erosion rates are numerically reproduced. Moreover, an additional mechanism for this phenomenon has been revealed. Specifically, debris flows on steep slopes are likely to fall into a high shear stress regime, under which conditions the sediment transport capacity always takes a maximum value and is independent of the sediment size. Therefore, the sediment settling velocity that is proportional to the sediment size affects the erosion rate directly. Second, we probe into the non-dimension number and energetics of the debris flows to find it necessary to incorporate water-sediment and particle-particle interactions into reproducing the debris flow processes. Third, two kinds of mechanisms for particle size coarsening in the head region of the debris flow are resolved: on the one hand, they can be incorporated and retained there if the debris flow acquires sediment from the bed in transit due to considering the hiding/exposure mechanisms and on the other hand, they can migrate to the head by preferential transport. Furthermore, a series of idealized tests were conducted to explore the factors contributing to the segregation of particles within a debris flow. The longitudinal particle segregation was reproduced by incorporating the shear-induced non-uniform vertical distributions of velocity and sediment concentrations, the visco-inertial rheology, as well as the grain-size heterogeneity into the modelling. Sensitive analysis shows that the transport of fine particles is more inhibited by the interaction of the flow, contributing to the larger transportation velocity of the coarse particle. We further observed that the water content, the slope, and the particle size would have positive effects on the longitudinal size segregation in the head region, contrasting with the negative effects of the flow viscosity. These factors affecting the segregation ratio are attributed to the changes in the ratio of the Reynolds Number of the flow between fine and coarse particle.

Calculation Method of Debris Flow Velocity and Debris Flow Model Design

RELATIONSHIP BETWEEN MOVEMENT CHARACTERISTICS OF NON-HOMOGENEOUS DEBRIS FLOW AND PEAK FLOW

Application and Design of an Efficient Siphon Dewatering System for Debris Flow Mitigation: A Case Study of a Small Catchment in Zhejiang Province, China

Predicting the Occurrence of Channelized Debris Flow by an Integrated Cascading Model: A Case Study of a Small Debris Flow-Prone Catchment in Zhejiang Province, China

ANALYSIS ON CRITICAL HYDRAULIC CONDITION FOR STARTING MOTION OF LARGE-SIZED PARTICLES IN VISCOUS DEBRIS FLOW

Relationships between starting motion of large-sized particles in debris flow and water flow condition

Experimental Study on Debris Flow Head and the Energy Theory

A model for the mean velocity of debris flow movement based on the minimum energy dissipation principle

Conceptual two-phase flow model of debris flow : II. Application

Simulation analysis on saturated debris flow dynamic process with the consideration of pore fluid pressure and its dissipation

Experimental Study on the Deposition Process of Debris Flows

Conceptual two-phase flow model of debris flow: I . Theory

Kinetic Energy Model of Two-Phase Debris Flow

A numerical model of debris flows with the Voellmy model over a real terrain

Application of Incomplete Similarity Theory to the Estimation of the Mean Velocity of Debris Flows

An optimized volume of fluid method for modelling three-dimensional debris flows. Implementation in OpenFOAM, validation, and application in the Aiwa Watershed, Beijing

Numerical Simulation of Debris-Flow Behavior Incorporating a Dynamic Method for Estimating the Entrainment

Lateral Shear Stress Calculation Model Based on Flow Velocity Field Distribution from Experimental Debris Flows

Some Considerations for Using Numerical Methods to Simulate Possible Debris Flows: The Case of the 2013 and 2020 Wayao Debris Flows (Sichuan, China)

Numerical Investigation about Propagation Characteristics and Hydro-Sediment-morphodynamic Interactions of Multi-Sized Debris Flow with a Two-Phase Continuum Model

Debris flow enlargement from entrainment: A case study for comparison of three entrainment models