Abstract:Train length status reflects whether the carriage is uncoupled or thrown away, it directly affects the safety and efficiency of train operations. At present, satellite positioning technology is used within a train length monitoring system. Such a system can ensure positioning accuracy while reducing the need for trackside equipment. For train length monitoring using GNSS technology, multi-constellation can utilize more visible satellites and achieve better spatial geometric distribution. A robust train length calculation method using multi-constellation GNSS moving-baseline positioning resolution is proposed. The time and space coordinate systems of the Global Positioning System (GPS) and BeiDou Navigation Satellite System (BDS) are unified as the foundation to realize multi-constellation positioning. Double-differenced carrier phase measurements are used to mitigate or eliminate the propagation errors and the satellite and receiver clock errors. Then, the moving-baseline length can be estimated using a Kalman filtering algorithm, and the carrier phase ambiguity terms are fixed using an online ambiguity fix algorithm to further improve the system performance. More measurements are utilized in the multi-constellation train length calculation method, the probability of fault measurement would be increased thereafter, and thus, the fault identification and adaptive filtering algorithm is introduced in the multi-constellation train length calculation to reduce the influence of fault measurement on the accuracy of moving-baseline solution and enhance the robustness of the system. To evaluate the performance of the proposed system, an experiment was conducted on the Beijing-Shenyang high-speed railway line. The results obtained on GPS-FLOAT, GPS-FIX, GPS/BDS-FLOAT, and GPS/BDS-FIX modes were compared. Both the FLOAT and FIX solutions can achieve the train length computation with sub-meter level accuracy, which can prove that the system is able to be adapt to the different GNSS signal conditions. The GPS/BDS-FIX solution can achieve train length accuracy with RMS of 0.155 m, which is better than the other three solutions. In addition, the moving-baseline accuracy is further improved after the adaptive filtering algorithm is added to smooth the noise interference, which had the best performance with RMS of 0.077 m compared with the non-adaptive filtering solutions. The superiority of the adaptive filtering algorithm is verified via using the dataset including two types of random fault measurements. It is proved that the random faults can be tolerated using adaptive filtering algorithm. The effectiveness and superiority of proposed robust train monitoring system are confirmed via comparison of results and simulation of different scenes.

A GNSS Baseline Network Adjustment Method Based on Length and Attitude Measurements

Real-Time Calibration Method For Ground-Based Tt&C Systems Using Satellite-To-Ground Differential Gps

Combined Adjustment Project of National Astronomical Geodetic Networks and 2000' National GPS Control Network*

Precise satellite-ground baseline determination

GPS/BDS Dual-Antenna Attitude Determination With Baseline-Length Constrained Ambiguity Resolution: Method and Performance Evaluation

An Online Error Calibration Method for Spaceflight TT&C Systems Based on LEO-ground DDGPS

Triple-Frequency Bds And Dual-Frequency Gps Combination Rtk Algorithm For Moving Baseline Relative Positioning

High-Rate Attitude Determination of Moving Vehicles with GNSS: GPS, BDS, GLONASS, and Galileo.

Robust train length calculation and monitoring method using GNSS multi-constellation moving-baseline positioning resolution

Baseline-constrained single-epoch GNSS attitude determination using a priori attitude information

An overall adjustment method for relative corrections of master reference stations in the BDS/GNSS network RTK system

Aircraft Attitude Determination Based on Combined Carrier Phase

Performance evaluation of triple-frequency GPS/Galileo/BDS single-epoch medium baseline RTK positioning

Accuracy Analysis of BeiDou-3/GPS Real-Time Precise Common View Time Transfer Based on Carrier-Phase

Long-Baseline Real-Time Kinematic Positioning: Utilizing Kalman Filtering and Partial Ambiguity Resolution with Dual-Frequency Signals from BDS, GPS, and Galileo

Improved Medium Baseline RTK Positioning Performance Based on BDS/Galileo/GPS Triple-Frequency-Only Observations

Real-time high-precision baseline measurement of satellite formation flying based on GNSS

A Low-Cost INS-Integratable GNSS Ultra-Short Baseline Attitude Determination System

High-Accuracy Attitude Determination Using Single-Difference Observables Based on Multi-Antenna GNSS Receiver with a Common Clock

Performance Analysis of Positioning Solution Using Low-Cost Single-Frequency U-Blox Receiver Based on Baseline Length Constraint

A Kalman Filter-Based Short Baseline Rtk Algorithm for Single-Frequency Combination of Gps and Bds