Load-carrying capacity and hysteretic performance of corrugated web connected BRB

Boli Zhu,Yanlin Guo,Ye Yuan

DOI: https://doi.org/10.15951/j.tmgcxb.2018.02.005

2018-01-01

Abstract:In this work,a new type of core-separated BRBs named corrugated-web-connected buckling-restrained braces (CW-BRB) is presented.The external restraining system of the CW-BRB is composed of two steel external tubes with rectangular hollow sections,which are connected by either single or double sinusoidal corrugated webs.Two cores of the CW-BRB at its ends extending outside the external tube are connected by a core stiffener to form a strong H-shaped core section,so that the overall flexural stiffness of the external restraining system and the core projections at each end of the CW-BRB can be greatly improved,and the design benefit from the load-carrying capacity of the CW-BRB can be remarkably increased.Firstly,the elastic buckling load of the CW-BRB is introduced by considering the shear deformation of the corrugated webs in the external restraining system,forming the basis for calculating restraining ratio or normalized slenderness ratio of the CS-BRB.Secondly,for the double sinusoidal corrugated web connected BRBs,the ultimate load-carrying capacity under monotonic axial compression and the hysteretic performance under repeated compressive-tensile cyclic loads are investigated respectively by using the refined finite element models based on shell element and the shell element-displacement coupling techniques.Moreover,the effects of the restraining ratio or normalized slenderness ratio on the mechanical performance and failure mode of the CW-BRB are studied.Finally,experimental studies on two specimens of CW-BRBs (one specimen with a single sinusoidal corrugated web and one specimen with double sinusoidal corrugated webs) have been conducted respectively to investigate their hysteretic performances and corresponding failure modes.Additionally,a refined FE model with shell elements is established for the simulation and comparison purpose with the experimental loading processes of two specimens.The numerical results obtained from the FE analyses agree well with the experimental results.