Abstract:A global navigation satellite system (GNSS) receiver with multi-antenna using clock synchronization technology is a powerful piece of equipment for precise attitude determination and reducing costs. The single-difference (SD) can eliminate both the satellites and receiver clock errors with the common clock between antennas, which benefits the GNSS short-baseline attitude determination due to its lower noise, higher redundancy and stronger function model strength. However, the existence of uncalibrated phase delay (UPD) makes it difficult to obtain fixed SD attitude solutions. Therefore, the key problem for the fixed SD attitude solutions is to separate the SD UPD and fix the SD ambiguities into integers between antennas. This article introduces the one-step ambiguity substitution approach to separate the SD UPD, through which we merge the SD UPD parameter with the SD ambiguity of the reference satellite ambiguity as the new SD UPD parameter. Reconstructing the other SD ambiguities, the rank deficiency can be remedied by nature, and the new SD ambiguities can have a natural integer feature. Finally, the fixed SD baseline and attitude solutions are obtained by combining the ambiguity substitution approach with integer ambiguity resolution (IAR). To verify the effect of the ambiguity substitution approach and the advantages of the SD observables with a common clock in practical applications, we conducted static, kinematic, and vehicle experiments. In static experiments, the root mean squared errors (RMSEs) of the yaw and pitch angles obtained by the SD observables with a common clock were improved by approximately 80% and 93%, respectively, compared to double-difference (DD) observables with a common clock in multi-day attitude solutions. The kinematic results show that the dispersion of the SD-Fix in the pitch angle is two times less that of the DD-Fix, and the standard deviations (STDs) of the pitch angle for SD-Fix can reach 0.02°. Based on the feasibility, five bridges with low pitch angles in the vehicle experiment environment, which the DD observables cannot detect, were detected by the SD observables with a common clock. The attitude angles obtained by the SD observables were also consistent with the fiber optic gyroscope (FOG) inertial navigation system (INS). This research on the SD observables with a common clock provides higher accuracy.

Analysis on Performance of GNSS Attitude Determination Receiver

Implementation of GNSS Attitude Determination Receiver

Performance Analysis of GNSS Receiver allied in High-Orbit Based on SoC Platform

Implement and Experiment of GNSS Receiver Software

A Low-Cost INS-Integratable GNSS Ultra-Short Baseline Attitude Determination System

Structure of GNSS Software Receiver and Its Realization

Architecture And Implementation Of Gnss Software Receiver For Compatibility And Interoperability Research

Algorithm Design and Simulation Test for Software GNSS Receiver

High-Rate Attitude Determination of Moving Vehicles with GNSS: GPS, BDS, GLONASS, and Galileo.

Research and Realization of Key Technology of GNSS Software Receiver

Performance Analysis Of Deeply Coupled Ins Assisted Multi-Carrier Vector Phase Lock Loop For High Dynamics

Implementation of A Gnss Receiver with an Unambiguous Acquisition and Tracking Technique

Carrier Phase-Based Precise Heading and Pitch Estimation Using a Low-Cost GNSS Receiver

Gnss Receiver Techniques Based On High Earth Orbit Spacecraft

High-Accuracy Attitude Determination Using Single-Difference Observables Based on Multi-Antenna GNSS Receiver with a Common Clock

GNSS Receiver for Q-Sat and Its Analysis of Precise Orbit Determination

GNSS Differential Interferometer

Research on Software GPS Receiver

Performance Analysis of Global Navigation Satellite System Signal Acquisition Aided by Different Grade Inertial Navigation System under Highly Dynamic Conditions

Starx A Gpu Based Multi-System Full-Band Real-Time Gnss Software Receiver

A Fine-Tuned Positioning Algorithm for Space-Borne GNSS Timing Receivers