Abstract:Adaptive arrays have been widely used for interference mitigation in Global Navigation Satellite System (GNSS) receivers. Unlike adaptive nulling, adaptive beam-forming generates a dedicated beam in the antenna pattern towards each individual satellite and form nulls in the interference directions at the same time. Thus, the satellite signals are enhanced while interferences are mitigated, resulting in improved signal-to-interference-plus-noise ratio (SINR). In previous literature mainly two categories of beam-forming mechanisms are recommended, namely the array synthesis method and the so-called "blind" beam-forming method. The array synthesis method calculates the steering vector directly, but needs a cumbersome correction procedure dealing with the non-ideal factors of the antenna array and radio frequency (RF) channels. The blind beam-forming method generates the steering vector on-the-fly using carrier phases collected by auxiliary tracking channels, thus avoids the correction procedure, but has a limited performance against interferences. As an alternative, we proposed a different beam-forming method, which can be regarded as a combination of the two above. This method consists of two steps. In the calibration step, a carrier phase look up table (LUT) is obtained using the live-sky signals. In the beam-forming step, the steering vector is generated by looking up the LUT. This method doesn't need a cumbersome non-ideal factor correction procedure, and has a good anti-interference performance, thus can be a third option for beam-forming.In order to implement and validate this method, a software-defined approach is used. Two real-time software receivers, one for the calibration step and one for the beam-forming step are designed and implemented. In order to meet the real-time requirement, a graphics processing unit (GPU) is used as an accelerator. A batched programming technique is used to fully take advantage of the parallelism offered by the GPU. Software design and programming details are introduced. Experiments are conducted in real environment and results are given. It concludes that this method has a good beam-forming performance in improving C/N-0 and getting more precise positioning results.

Code Phase Bias Reduction in Spatial Adaptive Beam-Forming GNSS Receivers

Anti-Jamming GNSS Antenna Array Receiver with Reduced Phase Distortions Using a Robust Phase Compensation Technique

A Two-Step Beam-Forming Method Based on Carrier Phases for Gnss Adaptive Array Anti-Jamming

Polyphase Decomposition Based Space Frequency Adaptive Processing in Antenna Array GNSS Receivers

Carrier Phase Bias Calibration Technique for Array Antenna Receiver

Data-oriented Calibration Method to Reduce Measurement Bias in SFAP-based GNSS Receivers

Beam Scanning Design and Performance Analysis for Near-Field IRS-Aided Integrated Sensing and Communication Systems

Amplitude-Dependent Phase-Gradient Directional Beamforming for IRS: A Scalable Optimization Framework

5.4 A 22.4-to-30.7ghz Phased-Array Receiver with Beam-Pattern Null-Steering and Beam-Tracking Techniques Achieving >30.2db OTA-Tested Spatial Rejection

Adaptive Blind Nulling Without Measurement Biases in GNSS Receivers

Robust Wideband Interference Suppression Method for GNSS Array Antenna Receiver via Hybrid Beamforming Technique

Cascaded Multitype Interferences Suppression Method Using Sparse Representation and Array Processing for GNSS Receiver

Robust adaptive beamforming with partly calibrated arrays in the presence of gain-phase errors

Distortionless Spatial Frequency Adaptive Processing in Antenna Array GNSS Receivers

Robust adaptive beamforming based on covariance matrix reconstruction using Gauss–Legendre quadrature and steering vector estimation

A Subspace-Based Code Tracking Loop Design for GPS Multi-Antenna Receiver in Multipath Environment

Adaptive Beamforming Based On Compressed Sensing With Gain/Phase Uncertainties

High Precision and Difference Measurement of Inter-element Amplitude and Phase Bias Errors Based on Channel Multiplexing

Robust Adaptive Beamforming Based on the Effective Steering Vector Estimation and Covariance Matrix Reconstruction Against Sensor Gain-Phase Errors

Performance Analysis Of Dbf Algorithm In Gps Software Receiver

Robust Adaptive Beamforming for Noncircular Signal Against Array Steering Vector Mismatch and Interference Nonstationarity