Abstract:Lithium (Li)-ion batteries are currently used for a wide variety of portable electronic devices, electric vehicles and renewable energy applications [1,2]. In addition, extensive worldwide research efforts are now being devoted to more advanced “beyond Li-ion” battery chemistries - such as lithium-sulfur (Li-S) [3] and lithium-air (Li-O 2 ) [4] - in which the carbon anode is replaced with Li metal. However, the practical application of Li metal anode systems has been highly problematic. The main challenges involve controlling the formation of a solid-electrolyte interphase (SEI) layer and the suppression of Li dendrite growth during the charge/discharge process (achieving “dendrite-free” cycling). The SEI layer formation continuously consumes the electrolyte components creating highly resistive layer, which leads to the rapid decrease of cycling performance and degradation of the Li anode [5]. The growth of Li metal dendrites at the anode contributes to rapid capacity fading (the presence of “dead Li” created during the discharge leads to an increased overpotential) and, in the case of continuous growth, leads to internal short circuits and extreme safety issues [6]. Here we demonstrate the application of an operando electrochemical scanning transmission electron microscopy ( ec -(S)TEM) cell to study the SEI layer formation and the initial stages of Li dendrite growth - the goal is to develop a mechanism for mitigating the degradation processes and increasing safety. Bright field (BF) STEM images in Figure 1 A-C show Li metal deposition and dissolution processes at the interface between the Pt working electrode and the lithium hexafluorophosphate (LiPF 6 ) in propylene carbonate (PC) electrolyte during three charge/discharge cycles. A contrast reversal caused by Li metal being lighter/less dense than surrounding electrolyte (Li appears brighter than the background in BF STEM images) allows Li to be uniquely identified from the other components in the system - the only solid material that is less dense than the electrolyte is Li metal. Using these images, we can precisely quantify the total volume of Li deposition, the thickness of the SEI layer (observed as a ring of positive contrast around the electrode) and alloy formation due to Li + ion insertion during each cycle. Furthermore, at the end of each discharge cycle we can quantify the presence of “dead Li” detached from the Pt electrode, thereby demonstrating the degree of irreversibility (and degradation of Pt electrode) associated with insertion/removal of Li + during this process with direct correlation to electrochemical performance. Such analyses provide significant insights into Li metal dendrite growth, which is critical to understand the complex interfacial reactions needed to be controlled for future Li-based and next generation energy storage systems. [7] References: [1] J. M. Tarascon, M. Armand, Nature , 414, (2001), 414 , 359-367 [2] J. B. Goodenough, Y. Kim, Chem. Mater., 22, (2010), 587-603 [3] X. L. Jie, L. F. Nazar, J. Mater. Chem., 20, (2010), 9821-9826 [4] P.G. Bruce, S. A. Freunberger, L. J. Hardwick, J. M. Tarascon, Nat. Mater., 11, (2012), 19-29 [5] P. Verma, P. Maire, P. Novak, Electrochim. Acta, 55, (2010), 6332-6341 [6] J. Wen, Y. Yu, C. Chen, Mater. Express , 2, (2012), 197-212 [7] This work was primarily supported by JCESR, an Energy Innovation Hub funded by DOE-BES. The development of the operando stage was supported by the Chemical Imaging LDRD Initiative at PNNL. PNNL is a multi-program national laboratory operated by Battelle for the U.S. DOE under Contract DE-AC05-76RL01830. A portion of the research was performed at the EMSL user facility sponsored by DOE-BER and located at PNNL. The multi-target tracking algorithm is supported by NSF-1334012. Figure 1

In Situ TEM Observations of Discharging/Charging of Solid-State Lithium-Sulfur Batteries at High Temperatures.

In Situ TEM Studies of Electrochemistry of High Temperature Lithium-Selenium All-Solid-state Batteries

Electrochemical Processes and Reactions in Rechargeable Battery Materials Revealed Via in Situ Transmission Electron Microscopy

In Situ Atomic-Scale Imaging of Electrochemical Lithiation in Silicon.

Visualization of the Lithium Sulfur Electrochemistry

Phase Separation of Li2S/S at Nanoscale During Electrochemical Lithiation of the Solid‐State Lithium–Sulfur Battery Using in Situ TEM

High‐Performance Lithium Solid‐State Batteries Operating at Elevated Temperature

Probing the Degradation Mechanisms in Electrolyte Solutions for Li-Ion Batteries by in Situ Transmission Electron Microscopy

Advanced Transmission Electron Microscopy for Electrode and Solid‐Electrolyte Materials in Lithium‐Ion Batteries

Mechanism Exploration of Li 2 S–Li 2 O–LiI Positive Electrodes with High Capacity and Long Cycle Life via TEM Observation

Revealing the Failure Mechanisms of Lithium Metal Solid-State Batteries with Solid Inorganic Electrolytes by in Situ Electron Microscopy

In situ transmission electron microscopy for understanding materials and interfaces challenges in all-solid-state lithium batteries

Understanding all solid-state lithium batteries through in situ transmission electron microscopy

Direct Observation of Li Dendrite Growth Through Operando Electrochemical (S)TEM

In-situ imaging the electrochemical reactions of Li-CO2 nanobatteries at high temperatures in an aberration corrected environmental transmission electron microscope

Atomic‐Scale Monitoring of Electrode Materials in Lithium‐Ion Batteries Using in Situ Transmission Electron Microscopy

Insight into the Interfacial Process and Mechanism in Lithium-Sulfur Batteries: an in Situ Afm Study

In Situ TEM Investigation of Electron Irradiation Induced Metastable States in Lithium-Ion Battery Cathodes: Li2FeSiO4 Versus LiFePO4

Synergistic Effect of Temperature and Electrolyte Concentration on Solid‐State Interphase for High‐Performance Lithium Metal Batteries

In Situ Atomic-Scale Observation of Electrochemical Delithiation Induced Structure Evolution of Licoo2 Cathode in A Working All-Solid-State Battery

Quantification of Electrochemical Nanoscale Processes in Lithium Batteries by Operando EC-(S)TEM