Abstract:Buildings consume about 20% of the total primary energy use in China. It is critical to enhancing building energy efficiency for sustainable development. The heating, ventilation, and air-conditioning (HVAC) systems account for about half of the energy consumption in commercial buildings. For large commercial buildings, central chiller plants are typically used to provide chilled water for space cooling and consume lots of energy. This study evaluates the impacts of different chiller design and their operation strategy on the energy performance of central chiller plants. A case study is conducted using an office building located in Beijing, China. Feasible chiller combinations are studied based on 13 available chillers with different capacities. Four control strategies are explored, including three sequencing control strategies based on weekly, daily, and hourly maximum cooling loads and one optimal control strategy. A building energy model is created using DeST to simulate the hourly cooling load of the office building, and calibrated using the measured data. An integration model has been developed in MATLAB scripts to calculate the annual energy consumption of the chillers for each chiller design under each control strategy. The results indicate that it is essential to control the chiller plant hourly; however, the optimal control may not be necessary. It is not good to select the chillers with all the same capacity. The capacity of the chillers should be slightly different to provide flexibility for control. The design of the chiller combination is essential in the design stage. When bad combinations of chillers were designed, the performance of the chiller plant may be low even with optimization control strategies. (C) 2020 Elsevier B.V. All rights reserved.

Building environment design simulation software DeST (9): simulation and analysis of cooling/heating plants (part 2)

Building environment design simulation software DeST (9): simulation and analysis of cooling plants (part 1)

Verification on the Simulation Result of Residential Building Energy Consumption of Occupant Behavior in the Hot Summer and Cold Winter Zone with DeST

Building environment design simulation software DeST(7):simulation and analysis of air handling process

Building environment design simulation software DeST(10): economic analysis for HVAC systems

Building environment design simulation software DeST(6):simulation and analyses of building environmental service scheme

DeST — an Integrated Building Simulation Toolkit Part I: Fundamentals

Conducting High Rise Building Design Using Dest Simulation

AN OVERVIEW OF AN INTEGRATED BUILDING SIMULATION TOOL - DESIGNER'S SIMULATION TOOLKIT (DEST)

Numerical Study On Energy Consumption Characteristics For Wall Insulation Structure In Hot Summer And Cold Winter Zone

DeST 3.0: A new-generation building performance simulation platform

Simulation of Residential Energy Consumption Based on Software of DeST

Simulation of energy consumption of air conditioning system for an office building

DeST—An integrated building simulation toolkit Part II: Applications

Introduction on a Simulation Software Framework for Building Thermal Environment Integrated with Indoor Air Quality

Comparison and research on HVAC system simulation part for different building energy modeling programs

Dest-An Integrated Building Simulation Toolkit Part.: Applications

Annual energy consumption simulation of separated heat-pipe heat exchangers

Annual energy-using simulation of separate heat-pipe heat exchanger

Design and Operation Optimization of Multi-Chiller Plants Based on Energy Performance Simulation

Development and application of simulation software for building combined cooling heating and power system