Abstract:Nonrenewable energy sources accounted for roughly 80% of total energy consumption [1]. Solar energy, wind energy, geothermal energy, hydropower, and fuel cells (FCs) have all recently been described as renewable energy sources. In commercial uses, renewable energy has experienced meteorological and logistical obstacles. Because of advantages such as simple fabrication/operation conditions, eco-friendly, high energy conversion efficiency, and long-term durability, FCs technologies are considered one of the most important renewable energy sources for many applications such as portable devices, cars, and electricity plants [2–5]. Methanol can be utilized in direct methanol fuel cells (DMFC) to produce clean energy that can be used in smart electronic gadgets or small automobiles in this regard [6]. However, before DMFC can be used commercially, the slow oxidation kinetics and catalyst toxicity [7] must be resolved. Therefore, the development of direct methanol fuel cells (DMFCs) is one of the most promising technologies for the applications of these devices in stationary power supplies and electric vehicles [8]. Apart from the future of mobile devices such as mobile chargers, phones, computers, and many other applications, this energy is environmentally benign because no gases are emitted and the waste is simply clean water. The biggest issue that this technique may encounter is its high cost due to the usage of noble metal catalysts (platinum (Pt) and ruthenium (Ru)) [9]. Methanol is oxidized via a multi-electron process and several products and/or intermediates can be formed, depending on the electrolyte and the nature of the electrode. Electrode materials are important parameters in the electrochemical oxidation of methanol, where high efficient electrocatalysts are needed. Several metal oxides such as Fe 2 O 3 , CeO 2 , MoOx, Co 3 O 4 , NiO, and CuO has been used in various applications, such as catalysis, water splitting photocatalysis, solar cells and gas sensing, besides their uses to enhance the electrocatalytic activity for methanol oxidation [10-11]. This paper describes the preparation of graphene quantum dot-doped polyaniline embedded copper metal-organic frameworks composite catalysts for investigating methanol oxidation in alkaline solutions. The electrode surface was characterized by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), and electrochemical impedance spectroscopy (EIS). After physicochemical characterizations of graphene quantum dot-doped polyaniline embedded copper metal-organic frameworks composite modified carbon ceramic electrode (Cu- MOF/GQDs-PAN/CCE), its electrocatalytic and stability characterizations toward methanol oxidation in alkaline media were investigated in detail by cyclic voltammetry and chronoamperometry. Results showed that, the electrocatalytic activity of the Cu- MOF/GQDs-PAN/CCE electrode is much higher than those of unmodified electrode under similar experimental conditions, showing the possibility of attaining good electrocatalytic anodes for fuel cells. Kinetic parameters such as the electron transfer coefficient (α) and the number of electrons involved in the rate determining step (n α ) for the oxidation of methanol were determined utilizing cyclic voltammetry (CV). Keywords: Graphene quantum dot, Polyaniline, Metal-organic frameworks, electrocatalyst, Methanol References [1] S.K. Kamarudin, F. Ahmad, W.R.W. Daud, Overview on application of direct methanol fuel cell (DMFC) for portable electronic devices, Int. J. Hydrog. Energy 34 (2009) 6902–6916. [2] L. Carrette, K.A. Friedrich, U. Stimming, Fuel cells: principles, types, fuels and applications, ChemPhysChem 1 (2000) 162–193. [3] A.B. Stambouli, Fuel cells: The expectations for an environmental-friendly and sustainable source of energy, Renew. Sustain. Energy Rev. 15 (9) (2011) 4507– 4520. [4] P. Joghee, J.N. Malik, S. Pylypenko, R. O'Hayre, A review on direct methanol fuel cells – In the perspective of energy and sustainability, MRS Energy Sustain. 2 (2015), https://doi.org/10.1557/mre.2015.4. [5] D. Hassen, M.A. Shenashen, S.A. El-Safty, M.M. Selim, H. Isago, A. Elmarakbi, H. Yamaguchi, Nitrogen-doped carbon-embedded TiO2 nanofibers as promising oxygen reduction reaction electrocatalysts, J. Power Sources 330 (2016) 292– 303. [6] M. Mansor, S.N. Timmiati, K.L. Lim, W.Y. Wong, S.K. Kamarudin, N.H. Nazirah Kamarudin, Recent progress of anode catalysts and their support materials for methanol electrooxidation reaction, Int. J. Hydrogen Energy 44 (29) (2019) 14744–14769, https://doi.org/10.1016/j.ijhydene.2019.04.100. [7] Z. Mousavi, A. Benvidi, S. Jahanbani, M. Mazloum-Ardakani, R. Vafazadeh, H. R. Zare, Investigation of electrochemical oxidation of methan -Abstract Truncated-

Chrysanthemum‐Flowers‐Like Bimetal Oxide Based Electrocatalyst for Methanol Oxidation Reaction

Mesoporous MoO3–x Material As an Efficient Electrocatalyst for Hydrogen Evolution Reactions

High-performance Mo2C/MWCNT electrocatalyst for MOR: Comparison with MoO2/MWCNT and MoO3/MWCNT

Trimetallic Ni–Co–Mo Nanoparticles Supported on N-Doped Carbon as a Promising Electrocatalyst for the Methanol-Assisted Hydrogen Evolution Reaction

Morphology-Controlled WO3 for the Photocatalytic Oxidation of Methane to Methanol in Mild Conditions

Urchin-like Ni-Co-P-O Nanocomposite As Novel Methanol Electro-Oxidation Materials in Alkaline Environment

Bismuth-doped cobaltosic oxide as a noble-metal free electrocatalyst for the efficient methanol oxidation reaction

Metal-organic framework-derived nanoflower and nanoflake metal oxides as electrocatalysts for methanol oxidation

Three-dimensional heterogeneous copper cobalt phosphides Nanoflowers for enhancing catalytic performance for electro-oxidation of methanol

Electrocatalytic Oxidation of Methanol over An Electrode with Ni‐MOF‐74 Catalyst

Enhanced Electrocatalytic Performance for Methanol Oxidation with A Magneli Phase Molybdenum Oxide/Pt-Black Composite

Trimetallic NiFeCr-LDH/MoS2composites as novel electrocatalyst for OER

Cobalt-Nanoparticle-Decorated Cobalt–Molybdenum Bimetal Oxides Embedded in Flower-like N-Doped Carbon as a Durable and Efficient Electrocatalyst for Oxygen Evolution Reaction

Core@Shell Heterostructured NiMoPx@Ni5P4 Nanorod Arrays Promoting Direct Electro‐Oxidation of Methanol and Hydrogen Evolution under Industry Conditions

Core–Shell Structured Cu(OH) 2 @NiFe(OH) x Nanotube Electrocatalysts for Methanol Oxidation Based Hydrogen Evolution

Electrochemical Properties of NiCo2O4/WO3/Activated Carbon Wheat Husk Nano-Electrocatalyst for Methanol and Ethanol Oxidation

In situ growth of Ni/Ni3S2–MoO2 nanocrystals on carbon cloth for the enhanced electrocatalytic oxidation of methanol

Assist more Pt-O bonds of Pt/MoO3-CNT as a highly efficient and stable electrocatalyst for methanol oxidation and oxygen reduction reaction

MnCo2O4/NiCo2O4/rGO as a Catalyst Based on Binary Transition Metal Oxide for the Methanol Oxidation Reaction

Methanol-tolerant MoN Electrocatalyst Synthesized Through Heat Treatment of Molybdenum Tetraphenylporphyrin for Four-Electron Oxygen Reduction Reaction

(Digital Presentation) Facile Fabrication of Graphene Quantum Dot- Doped Polyaniline Embedded Cu Metal-Organic Frameworks Composite Electrode As Improved Anode Electrocatalyst for Methanol Oxidation