Abstract:Compressible flow past a circular cylinder at an inflow Reynolds number of 2 x 10 5 is numerically investigated by using a constrained large-eddy simulation (CLES) technique. Numerical simulation with adiabatic wall boundary condition and at a free-stream Mach number of 0.75 is conducted to validate and verify the performance of the present CLES method in predicting separated flows. Some typical and characteristic physical quantities, such as the drag coefficient, the root-mean-square lift fluctuations, the Strouhal number, the pressure and skin friction distributions around the cylinder, etc. are calculated and compared with previously reported experimental data, finer-grid large-eddy simulation (LES) data and those obtained in the present LES and detached-eddy simulation (DES) on coarse grids. It turns out that CLES is superior to DES in predicting such separated flow and that CLES can mimic the intricate shock wave dynamics quite well. Then, the effects of Mach number on the flow patterns and parameters such as the pressure, skin friction and drag coefficients, and the cylinder surface temperature are studied, with Mach number varying from 0.1 to 0.95. Non-monotonic behaviors of the pressure and skin friction distributions are observed with increasing Mach number and the minimum mean separation angle occurs at a subcritical Mach number of between 0.3 and 0.5. Additionally, the wall temperature effects on the thermodynamic and aerodynamic quantities are explored in a series of simulations using isothermal wall boundary conditions at three different wall temperatures. It is found that the flow separates earlier from the cylinder surface with a longer recirculation length in the wake and a higher pressure coefficient at the rear stagnation point for higher wall temperature. Moreover, the influences of different thermal wall boundary conditions on the flow field are gradually magnified from the front stagnation point to the rear stagnation point. Moreover, the influences of different thermal wall boundary conditions on the flow field are graduallymagnified from the front stagnation point to the rear stagnation point. It is inferred that the CLES approach in its current version is a useful and effective tool for simulating wall-bounded compressible turbulent flows with massive separations.

Numerical study on the flow around an elliptic cylinder with different aspect ratios in the subcritical regime using large eddy simulation

Constrained Large-Eddy Simulation of Compressible Flow Past a Circular Cylinder

The Effect of Slip Distribution on Flow Past a Circular Cylinder

Drag Force on a Free Surface-Piercing Yawed Circular Cylinder in Steady Flow

Three-dimensional Numerical Simulation on Flow Past Three Circular Cylinders in an Equilateral-Triangular Arrangement

Numerical Simulation of Viscous Flow Past an Oscillating Square Cylinder Using A Cip-Based Model

New Insight on Large-Eddy Simulation of Flow Past a Circular Cylinder at Subcritical Reynolds Number 3900

Numerical investigation of flow past two elliptical cylinders in side-by-side arrangement via lattice Boltzmann-fictitious domain method

Large eddy simulation of flow around two side-by-side circular cylinders at Reynolds number 3900

Numerical Study on Flow Around Four Square-Arranged Cylinders at Low Reynolds Numbers

Numerical investigation of flow over a finite length inclination circular cylinder under Re = 3900

The Influence of Advection Schemes and Turbulence Closure Models on Drag Coefficient Calculation Around a Circular Cylinder at High Reynolds Number

Study on the Mechanism of Flow Around the Regular and Irregular Cylinders

Large eddy simulation of flow around a rectangular cylinder at low subsonic and transonic speeds

Numerical Study on the Vortex Motion Patterns Around a Rotating Circular Cylinder and Their Critical Characters

Large eddy simulation of flows around a square cylinder

Drag Force on a Circular Cylinder in Stratified Flow: A Two-Dimensional Numerical Study

A LARGE EDDY SIMULATION OF THE NEAR WAKE OF A CIRCULAR CYLINDER

Application of Large Eddy Simulation to an Oscillating Flow Past A Circular Cylinder

Numerical simulations of flow around two circular cylinders in cruciform arrangement and vortex structures analysis

Large-Eddy and Detached-Eddy Simulations of the Separated Flow Around a Circular Cylinder