Abstract:The combination of laser-induced breakdown spectroscopy and energy dispersive X-ray fluorescence spectroscopy in the coal quality analysis was reported formerly. But in the practical test of the prototype instrument in the real power plant, the X-ray fluorescence signals suffered from intensity fluctuations over long-time measurements. The long-term signal fluctuations cause lower efficiency on the establishment of the calibration model and relatively larger root-mean-squared error of prediction (RMSEP) for unknown samples. Therefore, the spectral intensity correction was performed in the measurements; a randomly selected sample was measured several times in the whole measurements, including the modeling samples and unknown samples, recording the signal fluctuations and searching for a set of factors suitable for the intensity correction of a full-spectrum–based partial least square calibration model. In addition, as the signals of the coal samples of the power plant showed the potential of classification, the piecewise models were also established in case of further enhancement of the model or prediction accuracy. The RMSEPs of the calorific value, ash, volatile, and sulfur were lowered from 0.68 MJ/kg, 1.62%, 0.32%, and 0.24% to 0.51 MJ/kg, 1.34%, 0.16%, and 0.14% after spectral intensity correction, respectively. The piecewise modeling with spectral intensity correction achieved similar RMSEP for volatile and sulfur prediction but with more accurate models. The spectral intensity correction showed the ability to reduce the long-term signal fluctuation, and piecewise modeling also showed more efficiency in the model establishments for volatile and ash determination.

Surface Profile Measurement of Coal Based on Structured Light Multifrequency Phase-Shifting Technique

Nonlinear Effect of the Structured Light Profilometry in the Phase-Shifting Method and Error Correction

Phase Error Correction by &Lt;inline-Formula><math Display="inline" Overflow="scroll"><mi>π</mi></math></inline-Formula>-shift Odd-Step Fringe Projection and Speckle Filtering in Phase Measuring Profilometry

Discussions on Phase-Reconstructing Algorithms for 3d Digitizing Structure-Light Profilometry

Surface Measurement Methods Based on Single and Multi-Frequency Fringes and Its Applications in Reverse Engineering

Selection of Phase-Recovery Algorithms for Fringe Processing in Optical Measurement of Micro-Surface

Optimization of binary structured light coding for fast 3D shape measurement

Improved Dual-Frequency On-Line Phase Measuring Profilometry Based On Full-Cycle Equal Phase-Shift Algorithm

Local Phase Correction Method Based on Multi-Frequency Phase Heterodyne.

On-line Three-Dimensional Inspection Using Randomly Phase-Shifting Fringe Based on Least-Square Iteration

Improved Algorithm for Phase-to-height Mapping in Phase Measuring Profilometry.

Three-Dimensional Surface-Shape Measurement of Moving Billets Using Phase-Shifting Profilometry

An on-line phase measuring profilometry: Processed modulation using for pixel matching

A Dual-Frequency Online PMP Method with Phase-Shifting Parallel to Moving Direction of Measured Object

Global Phase Accuracy Enhancement of Structured Light System Calibration and 3D Reconstruction by Overcoming Inevitable Unsatisfactory Intensity Modulation

Surface Microstructure Profilometry Based On Laser Confocal Feedback

Accuracy Enhancement of LIBS-XRF Coal Quality Analysis Through Spectral Intensity Correction and Piecewise Modeling

An Absolute Phase Technique for 3D Profile Measurement Using Four-Step Structured Light Pattern

Phase Sampling Profilometry

New 3D surface profile measurement based on phase-shift interfering technology

Phase calculation of smooth surface with multi-reflectivity based on phase measurement deflectometry.