Abstract:Recently the research on hydraulically actuated exoskeleton becomes an attractive topic for those application requirements of human performance augmentation. The control goal of this type of exoskeleton system is to minimize the human machine interaction force. And it becomes more challenging for hydraulically actuated lower limb exoskeleton where the multi-variable nonlinear dynamics is quite complicated and multiple walking phases are existing. Furthermore, since the exoskeleton is driven by the hydraulic actuators, the accurate output force tracking can not be easily realized due to the large compressibility of hydraulic oil. This paper focuses on the human machine interaction force control and the walking phase partition of the hydraulically actuated lower limb exoskeleton. Firstly, a cascade interaction force control strategy is proposed for a 3-DOF support leg which is the basic partitioned module of the lower limb exoskeleton. The spring model is built for the dynamics of human-machine interface, and a high level controller minimizing the integral of human-machine interaction force is designed to generate the desired joint trajectories of the exoskeleton which can be considered as the human motion intent. Subsequently, an independent joint based PID controller is developed in the low level to achieve the good tracking of the above generated human motion intent. Secondly, the exoskeleton system in different walking phases is partitioned into three serial chain manipulator modules. For each serial chain manipulator module, the proposed cascade interaction force controller is applied to minimize the human machine interaction force at the end effector. Finally, the walking experiments with 20Kg load on a practical hydraulically actuated lower limb exoskeleton are carried out to validate the effectiveness of the proposed approach.

Model-based Control with Interaction Predicting for Human-coupled Lower Exoskeleton Systems.

Interactive Learning For Sensitivity Factors Of A Human-Powered Augmentation Lower Exoskeleton

Adaptive CPG-Based Impedance Control for Assistive Lower Limb Exoskeleton

Hybrid Control For Human-Powered Augmentation Exoskeleton

Probabilistic Sensitivity Amplification Control for Lower Extremity Exoskeleton

Adaptive robust backstepping force control of 1-dof joint exoskeleton for human performance augmentation

Adaptive Compensation for Time-Varying Uncertainties in Model-Based Control of Lower-Limb Exoskeleton Systems

Non-linear Sliding Mode Control of the Lower Extremity Exoskeleton Based on Human–robot Cooperation

Single-input adaptive fuzzy sliding mode control of the lower extremity exoskeleton based on human–robot interaction:

Hierarchical Human Machine Interaction Learning for a Lower Extremity Augmentation Device.

Parameter Identification Based Sensitivity Amplification Control for Lower Extremity Exoskeleton

Robust Sliding Mode Control Based on Ga Optimization and Cmac Compensation for Lower Limb Exoskeleton

Model Predictive Control for Human-Centred Lower Limb Robotic Assistance

Cascade Force Control of Lower Limb Hydraulic Exoskeleton for Human Performance Augmentation

Interaction Learning Control with Movement Primitives for Lower Limb Exoskeleton.

A Control Strategy for Squat Assistance of Lower Limb Exoskeleton with Back Sensing

Development, Dynamic Modeling, and Multi-Modal Control of a Therapeutic Exoskeleton for Upper Limb Rehabilitation Training

Arm exoskeleton based on model predictive control with input/output feedback linearization

Gait Tracking For Lower Extremity Exoskeleton Based On Sliding Mode Control With Cmac Compensation

Multilevel Control Strategy of Human–Exoskeleton Cooperative Motion with Multimodal Wearable Training Evaluation

Data-Driven Model-Free Adaptive Containment Control for Uncertain Rehabilitation Exoskeleton Robots with Input Constraints