Abstract:Piezoelectric multilayers can achieve both piezoelectric and triboelectric generation simultaneously by the deformation and contacting–separating process between upper and lower surfaces of adjacent layers. The electrospun poly(vinylidene fluoride) (PVDF) fiber film as a type of piezoelectric multilayer with abundant inner surfaces can generate both large piezoelectric and triboelectric signals. However, in most studies on the piezoelectric fiber films, the high-generation performances are attributed to the piezoelectric properties and their triboelectric contribution is usually ignored. Thus, the contributions of triboelectricity in piezoelectric multilayers should be considered, and a highly effective hybrid nanogenerator needs to be designed by achieving the synergy of triboelectricity and piezoelectricity. Herein, a head-to-head parallel assembly was used in a PVDF multilayer generator to improve the electricity output, and the respective contributions and synergistic effect of triboelectricity and piezoelectricity in multilayer generators were studied. The maximum open-circuit voltage, short-circuit current, and charge values of the designed hybrid nanogenerator device were 150 V, 7 μA, and 100 nC, respectively. Then, the head-to-head parallel assembly method was used for electrospun poly(vinylidene fluoride-co-trifluoroethylene) fiber films, and the output performance was shown to be about 4 times that obtained by the normal series connection. This head-to-head parallel assembly can be used as a common harvesting method to collect piezoelectric and triboelectric energy effectively from piezoelectric multilayers.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c02045.Illustration of three combination modes of hybrid piezoelectric and triboeletric nanogenerators; preparation of the PVDF-TrFE fiber and images of the product obtained; supplementary device preparation methods; test methods; and additional experimental data (PDF)Video related to light up LEDs in series with the hybrid nanogenerator (MP4)This article has not yet been cited by other publications.

High-energy Conversion-Efficiency Direct-Alternating-current Hybrid Generator with Piezoelectric Polylactide and Dynamic Schottky Diode

A High Current Density Direct‐Current Generator Based on a Moving Van Der Waals Schottky Diode

High Performance Direct-Current Generator Based on Dynamic PN Junctions

Interfacial Built-In Electric Field-Driven Direct Current Generator Based on Dynamic Silicon Homojunction

R-Shaped Hybrid Nanogenerator with Enhanced Piezoelectricity.

Tunable Dynamic Black Phosphorus/Insulator/Si Heterojunction Direct-Current Generator Based on the Hot Electron Transport

Tunable Dynamic Black Phosphorus/Insulator/Si Heterojunction Direct-Current Generator Based on the Hot Electron Transport.

Design of High-Performance Triboelectric-Piezoelectric Hybridized Mechanical Energy Harvester Inspired by Three-Phase Asynchronous Generator

Remarkably enhanced hybrid piezo/triboelectric nanogenerator via rational modulation of piezoelectric and dielectric properties for self-powered electronics

Enhanced nanogenerator by embedding lead-free double perovskite Cs2AgBiBr6 in polymer matrix for hybrid energy harvesting

Direct-Current Generator Based on Moving Van der Waals Schottky Diode

Hybrid Piezoelectric/Triboelectric Wearable Nanogenerator Based on Stretchable PVDF-PDMS Composite Films

Enhanced Dielectric Properties of Halloysite/pvdf-Hfp Modified by Li-ion Realizing Superior Energy Conversion Ability

Hybrid nanogenerators based on PVDF/6H–SiC composite film with enhanced mechanical energy utilization efficiency

Dynamic Pluronic F127 Crosslinking Enhancement of Biopolymeric Nanocomposites for Piezo-Triboelectric Single-Hybrid Nanogenerators and Self-Powered Sensors

Direct-current generators based on conductive polymers for self-powered flexible devices

Effective Mechanical Energy Harvesting from PVDF Multilayers by Head-to-Head Parallel Assembly

High‐Performance Flexible Schottky DC Generator via Metal/Conducting Polymer Sliding Contacts

Performance Improvement and Application of Degradable Poly-l-lactide and Yttrium-Doped Zinc Oxide Hybrid Films for Energy Harvesting

Flexible Hybridized Nanogenerators Based on a Reduced Graphene Oxide Nanosheet-Decorated Piezoceramic Skeleton to Impact Mechanical and Thermal Energy Harvesting

Polarized Water Enabled Vertical Dynamic Diode Generator to Output Direct Current