Abstract:The powdered citrus peel, which has been replaced with sodium hydroxide, was used in this study to test how well methylene blue and reactive black 5 dyestuff absorbed one or both. To find out about the texture and surface chemistry of modified citrus peel, Fourier transform infrared spectroscopy and scanning electron microscope analyses were carried out. Fourier transform infrared spectroscopy data revealed the presence of amphoteric radicals on the modified citrus peel surface, indicating the effective adsorption of methylene blue and reactive black 5. Many parameters affecting the batch adsorption process, such as modified citrus peel dose (0.1–0.5 g), pH (2–10), time (20–80 min), stirring speed (60–180 rpm), and temperature (20–45 °C), were studied. It is seen that the physical effect is at the forefront, homogeneous monolayer adsorption occurs, and the process fits the Langmuir and pseudo first order models for dyestuffs. Thermodynamic modeling showed that the adsorption of methylene blue and reactive black 5 was spontaneous and endothermic. At pH 2, an adsorption capacity of 0.67 mg/g and a removal efficiency of 66.86% were achieved for reactive black 5. For methylene blue at pH 6, the adsorption capacity was 4.34 mg/g, and the decolorization rate was 87%. The decreases in the removal rates of dyestuffs in the binary system indicate that they are affected by their simultaneous presence in the solution. The results proved that modified citrus peel can be useful for dyestuff removal in single or binary systems, although the removal capacity of modified citrus peel is highly dependent on methylene blue and reactive black 5.

Adsorption of Methylene Blue Using FeCl3-Modified Pomelo Peel

Pomelo Peel Modified With Citrate As A Sustainable Adsorbent For Removal Of Methylene Blue From Aqueous Solution

Study on the Biosorption Mechanism of Methylene Blue in Aqueous Solution Using Pummelo Peel

Enhanced Removal Of Methylene Blue From Aqueous Solution By Pummelo Peel Pretreated With Sodium Hydroxide

Facile Preparation of Porous Carbon Derived from Pomelo Peel for Efficient Adsorption of Methylene Blue

Adsorption of dyes from aqueous solution by pummelo (Citrus grandis (L.) osbeck) peel

Revealing the Combined Effect of Active Sites and Intra-Particle Diffusion on Adsorption Mechanism of Methylene Blue on Activated Red-Pulp Pomelo Peel Biochar

Adsorption of methylene blue from water by citric acid modified orange peel.

Treatment Technology of Printing and Dyeing Wastewater from Modified Grapefruit Peel

Selective adsorption of single and binary dyestuffs by citrus peel: Characterization, and adsorption performance

Graphene oxide nanosheets immobilised on honeycomb pore structure of pomelo peel for enhanced removal of methylene blue

Engineered biosorbents of pomelo (Citrus maxima (Burm.f.) Merr) peels modified with zinc oxide and titanium dioxide for methylene blue dye sorption

Study on the adsorption mechanism of neutral red in aqueous solution by pomelo peel

FeOCl-Modified Peanut Hull As Novel Bio-Sorbent for Fast Adsorption of Methylene Blue: Kinetics, Isotherms, and Mechanisms

Production of Mesoporous Activated Carbon from Tea Fruit Peel Residues and Its Evaluation of Methylene Blue Removal from Aqueous Solutions

The performance of an eco-friendly adsorbent for methylene blue removal from aqueous solution: Kinetic, isotherm, and thermodynamic approaches

Research on the properties of modified water treatment agent for white pulp of pomelo peel

Citrus Pectin Derived Ultrasmall Fe3o4@C Nanoparticles As A High-Performance Adsorbent Toward Removal of Methylene Blue

Utilization of Mandarin Orange Peel Waste as an Adsorbent for Methylene Blue Dye

Optimization of methylene blue removal by H3PO4 thermochemically treated mixed pineapple peel and algae adsorbent and insight on the adsorption mechanism

Adsorptive Removal of Methyl Orange and Methylene Blue from Aqueous Solution with Finger-Citron-Residue-Based Activated Carbon