Abstract:This research presents an innovative approach to the in-situ fabrication of Mn-doped NiFe2O4 (Mn-NiFe2O4) nanosheet arrays directly on nickel foam substrates. The formation of precursors on the nickel foam substrates is achieved through spontaneous corrosion, followed by a thermal treatment to form the Mn-NiFe2O4 nanosheet arrays. The material's structure and morphology were thoroughly examined, revealing that the addition of Mn transforms the nanoporous structure on the nickel foam into a nanosheet structure. The average thickness of the nanosheets is 30 nm, and their primary composition is Mn-doped NiFe2O4. The resulting highly porous structure of these nanosheets provides numerous active sites and effective electron and ion diffusion channels, thereby increasing charge density and mechanical stability. Electrochemical assays show that the areal-specific capacity of the synthesized electrode material reaches 4.34 C cm(-2) (areal-specific capacitance is 8.68 F cm(-2)) at 1 mA cm(-2). Notably, the constructed hybrid supercapacitor achieves a power density of 544 mu W cm(-2) at an energy density of 390 mu Wh cm(-2). Furthermore, capacitance retention is 95.2% after 5000 charging cycles. Additionally, the assembled device delivers robust and sustained energy output for LED displays and electric toy cars. This method streamlines the production flow of electrode materials, reducing energy consumption while significantly enhancing the areal capacitance of supercapacitors. The assembled hybrid supercapacitor structure diagram and the assembled devices provide power sources for electric toy cars and LED displays.

High performance MnO2 supercapacitor material prepared by modified electrodeposition method with different electrodeposition voltages

Rapid Synthesis of Mn-Doped NiFe2O4 Nanosheet Arrays for High-Performance Hybrid Supercapacitors

Electrodeposition manganese oxide on Ni foam loaded graphene for high-performance supercapacitor

Electrodeposited manganese oxide on nickel foam-supported carbon nanotubes for electrode of supercapacitors

Synthesis of MnO2/N-doped Ultramicroporous Carbon Nanospheres for High-Performance Supercapacitor Electrodes

Facile Fabrication of MnO2/Graphene/Ni Foam Composites for High-Performance Supercapacitors

A Ni-doped Mn-MOF decorated on Ni-foam as an electrode for high-performance supercapacitors

Sodium Dodecylbenzene Sulfonate Assisted Electrodeposition of MnO2@C Electrode for High Performance Supercapacitor

Characterization of NiCo2 O4 as high-performance supercapacitor electrode materials

Sodium Dodecylbenzene Sulfonate Assisted Electrodeposition of MnO 2 @C Electrode for High Performance Supercapacitor

High Specific Capacitance of the Electrodeposited MnO2 on Porous Foam Nickel Soaked in Alcohol and its Dependence on Precursor Concentration

Preparation of Eco-Friendly High-Performance Manganese Dioxide Supercapacitors by Linear Sweep Voltammetry

The Preparation of Nanostructure MnO_2 for Supercapacitor Electrode Material by Electrodeposition

Ultrastable MnO2 Nanoparticle/three-Dimensional N-doped Reduced Graphene Oxide Composite As Electrode Material for Supercapacitor

Facile Synthesis of Foamed-Nickel Supporting MnO2 As Binder-Less Electrodes for High Electrochemical Performance Supercapacitors

Ultrasonic and NH4+ Assisted Ni Foam Substrate Oxidation to Achieve High Performance MnO2 Supercapacitor

NiO nanoflakes decorated needle-like MnCo2O4 hierarchical structure on nickle foam as an additive-free and high performance supercapacitor electrode

Electrodeposited Porous Mn1.5Co1.5O₄/Ni Composite Electrodes for High-Voltage Asymmetric Supercapacitors

Integration of MnO2 and ZIF-Derived nanoporous carbon on nickel foam as an electrode for high-performance supercapacitors

MnO2/multiwall Carbon Nanotube/ni-Foam Hybrid Electrode for Electrochemical Capacitor

Electrodeposition mode effects on the electrochemical performance of MnO2–NiO eco-friendly material for supercapacitor electrode application