Abstract:Underwater manipulators are important robotic tools in the exploration of the ocean environment. Up to now, most existing underwater manipulators are rigid and with fixed 5 or 7 degrees of freedom (DOF), which may not be very suitable for some complicated underwater scenarios (e.g., pipe networks, narrow deep cavities, etc.). The biomimetic concept of muscles and tendons is also considered as continuum manipulators, but load capacity and operation accuracy are their essential drawbacks and thus limit their practical applications. Recently, the cable-driven technique has been developed for manipulators, which can include numerous joints and hyper-redundant DOF to execute tasks with dexterity and adaptability and thus they have strong potential for these complex underwater applications. In this paper, the design of a novel cable-driven hyper-redundant manipulator (CDHRM) is introduced, which is driven by multiple cables passing through the tubular structure from the base to the end-effector, and the joint numbers can be extended and decided by the specific underwater task requirements. The kinematic analysis of the proposed CDHRM is given which includes two parts: the cable-joint kinematics and the joint-end kinematics. The geometric relationship between the cable length and the joint angles are derived via the established geometric model for the cable-joint kinematics, and the projection relationship between the joint angles and end-effector’s pose is established via the spatial coordinate transformation matrix for the joint-end kinematics. Thus, the complex mapping relationships among the cables, joints and end-effectors are clearly achieved. To implement precise control, the kinematic control scheme is developed for the CDHRM with series-parallel connections and hyper-redundancy to achieve good tracking performance. The experiment on a real CDHRM system with five joints is carried out and the results verify the accuracy of kinematics solution, and the effectiveness of the proposed control design. Particularly, three experiments are tested in the underwater environment, which verifies its good tracking performance, load carrying and grasping capacity.

Development and Control of a Humanoid Underwater Robot

Novel Online Optimized Control for Underwater Pipe-Cleaning Robots

Locating, Trajectory Planning and Control of an Underwater Propeller Cleaning Manipulator

TJ-FlyingFish: an Unmanned Morphable Aerial-Aquatic Vehicle System

A Haptic Shared Control Architecture for Tracking of a Moving Object.

Controlling Ocean One: Human–robot collaboration for deep‐sea manipulation

Human–Robot Shared Control Based on Locally Weighted Intent Prediction for a Teleoperated Hydraulic Manipulator System

Development of underwater electric manipulator based on interventional autonomous underwater vehicle (AUV)

Development of a Synchronized Human-Robot-Virtuality Interaction System Using Cooperative Robot and Motion Capture Device

Recent Progress of an Underwater Robotic Avatar

Design and Kinematic Control of the Cable-Driven Hyper-Redundant Manipulator for Potential Underwater Applications

Development of a multi-tentacled collaborative underwater robot with adjustable roll angle for each tentacle

Dynamics Modeling and Motion Control of an New Unmanned Underwater Vehicle

Toward the Intelligent, Safe Exploration of a Biomimetic Underwater Robot: Modeling, Planning, and Control

Human-robot Shared Control for Humanoid Manipulator Trajectory Planning

Development and Control of Dolphin-Like Underwater Vehicle

An Underwater Robotic System with a Soft Continuum Manipulator for Autonomous Aquatic Grasping

Grasping for the Seabed: Developing a New Underwater Robot Arm for Shallow-Water Intervention

Distributed Motion Control for Multiple Connected Surface Vessels

Cooperative Control of Multiple Underwater Robots Based on Brief Binary Optical-Acoustic Dual Signals

Self-Improving Autonomous Underwater Manipulation