Abstract:Fe2O3 has been considered as a promising anode candidate for lithium-ion batteries (LIBs) due to high specific capacity, low cost, and environmental friendliness but still suffers from fast capacity fading and insufficient rate performance. The essential problem can be attributed to the phase aggregation and slow ion diffusion. Herein, a nanoreactor–container, an amorphous lithium-phosphate-encapsulated Fe2O3 anode, is successfully developed. Such a fine nanoreactor–container is constructed by lithium phosphate oligomer electrostatic adsorption and cross-linking on a hydroxylated precursor, which can effectively inhibit Fe2O3 coarsening and promote fast lithium-ion transfer, thus facilitating the reversible and fast conversion reactions of the Fe2O3 anode during lithiation/delithiation. As a result, the optimized hybrid Fe2O3 anode with 5 wt % amorphous lithium phosphate (5% LixPO4@Fe2O3) delivers a maximum capacity of 1100 mA h g–1 at 0.2 A g–1 as well as 615 mA h g–1 even at 20 A g–1 and retains almost 100% after 900 cycles at 0.5 A g–1, very competitive compared to other iron oxide anode materials. This ingenious structure design and facile synthesis method, coupled with the excellent comprehensive performances, indicate that this hybrid composite could contribute a unique type of iron oxide anode material for battery applications.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c04031.Experimental section. SEM image and XRD pattern of the as-prepared precursor. TEM and HR-TEM images of bare Fe2O3 samples. Pore size distributions of different Fe2O3 samples. High-resolution Fe 2p XPS spectra of a bare Fe2O3 sample. High-resolution O 1s XPS spectra of bare Fe2O3 and 5% LixPO4@Fe2O3 samples. Specific capacities of different contents of LixPO4-encapsulated Fe2O3 composites at different current densities. TEM and HR-TEM images of 2.5% LixPO4@Fe2O3 samples. Discharge/charge profiles of the as-obtained 5% LixPO4@Fe2O3 and Fe2O3 electrodes. The values of DLi+, Rs, Rf, and Rct for cycled 5% LixPO4@Fe2O3 and bare Fe2O3 electrodes (PDF)This article has not yet been cited by other publications.

Higher Than 90% Initial Coulombic Efficiency with Staghorn-Coral-Like 3D Porous LiFeO2- X As Anode Materials for Li-Ion Batteries.

Fe2O3–Ag Porous Film Anodes for Ultrahigh‐Rate Lithium‐Ion Batteries

Carbon Encapsulated Fe3o4 Nanospheres With High Electrochemical Performance As Anode Materials For Li-Ion Battery

Amorphous Fe2O3 As a High-Capacity, High-Rate and Long-Life Anode Material for Lithium Ion Batteries

Efficient Fe3C-CF Cathode Catalyst Based on the Formation/Decomposition of Li2−xO2 for Li-O2 Batteries

Amorphous Lithium-Phosphate-Encapsulated Fe2O3 As a High-Rate and Long-Life Anode for Lithium-Ion Batteries

Porous ZnFe2O4 Nanospheres As Anode Materials for Li-ion Battery with High Performance

3D Porous iron oxide/carbon with large surface area as advanced anode materials for lithium-ion batteries

Electrostatic spray deposition of porous Fe2O3 thin films as anode material with improved electrochemical performance for lithium–ion batteries

3-Dimensional Hierarchically Porous ZnFe2O4/C Composites with Stable Performance As Anode Materials for Li-ion Batteries

Amorphous Lithium-Phosphate-Encapsulated Fe 2 O 3 as a High-Rate and Long-Life Anode for Lithium-Ion Batteries

Li2ZnTi3O8@α-Fe2O3 Composite Anode Material for Li-ion Batteries

N-doped Graphitized Carbon-Coated Fe 2 O 3 Nanoparticles in Highly Graphitized Carbon Hollow Fibers for Advanced Lithium-ion Batteries Anodes

Polypyrrole-coated triple-layer yolk-shell Fe2O3 anode materials with their superior overall performance in lithium-ion batteries

One-step Thermal Decomposition of C4H4FeO6 to Fe3O4@carbon Nano-Composite for High-Performance Lithium-Ion Batteries

Fe2O3 nanoparticles encapsulated in the inner walls of integrated 3D carbon tube grid as high-performance anode for lithium-ion batteries

Spatially confined transition metals boost high initial coulombic efficiency in alloy anodes

Superior Full-Cell Cycling and Rate Performance Achieved by Carbon Coated Hollow Fe3O4 Nanoellipsoids for Lithium Ion Battery

Improved Electrochemical Performance of Porous Fe3o4/Carbon Core/Shell Nanorods As an Anode for Lithium-Ion Batteries

Mesoporous Fe2O3 nanoparticles as high performance anode materials for lithium-ion batteries

Three-dimensionally Porous Fe3O4 As High-Performance Anode Materials for Lithium–ion Batteries