Abstract:Ground-based synthetic aperture radar interferometry (GB-InSAR) is a valuable tool for deformation monitoring. The 2D interferograms obtained by GB-InSAR can be integrated with a 3D terrain model to visually and accurately locate deformed areas. The process has been preliminarily realized by geometric mapping assisted by terrestrial laser scanning (TLS). However, due to the line-of-sight (LOS) deformation monitoring, shadow and layover often occur in topographically rugged areas, which makes it difficult to distinguish the deformed points on the slope between the ones on the pavement. The extant resampling and interpolation method, which is designed for solving the scale difference between the point cloud and radar pixels, does not consider the local scattering characteristics difference of slope. The scattering difference information of road surface and slope surface in the terrain model is deeply weakened. We propose a differentiated method with integrated GB-InSAR and terrain surface point cloud. Local geometric and scattering characteristics of the slope were extracted, which account for pavement and slope differentiating. The geometric model is based on a GB-InSAR system with linear repeated-pass and the topographic point cloud relative observation geometry. The scattering model is based on k-nearest neighbor (KNN) points in small patches varies as radar micro-wave incident angle changes. Simulation and a field experiment were conducted in an open-pit mine. The results show that the proposed method effectively distinguishes pavement and slope surface deformation and the abnormal area boundary is partially relieved.

GB-InSAR Special Issues During Its Applications on DEM Generation

GB-InSAR interferogram processing method to generate DEM based on PS technology

An Improved Multi-Baseline Phase Unwrapping Method for GB-InSAR.

Interferometric DEM-Assisted High Precision Imaging Method for ArcSAR

INTERFEROMATIC SAR(INSAR) AND ITS APPLICATION TO EXTRACTION OF GEOLOGICAL INFORMATION

DEM generation and analysis on rugged terrain using ENVISAT/ASAR ENVISAT/ASAR multi-angle insar data

Ground-Based SAR Wide View Angle Full-Field Imaging Algorithm Based on Keystone Formatting

A Performance Analysis of Typical Imaging Algorithms in Ground-Based Synthetic Aperture Radar

Using Range Split-Spectrum Interferometry to Reduce Phase Unwrapping Errors for InSAR-Derived DEM in Large Gradient Region

Millimeter-wave Interferometric Synthetic Aperture Radar Data Imaging Based on Terrain Surface Projection

A Multi-Baseline Algorithm with Sparsely-Distributed Permanent Scatterers to Unwrap InSAR Phase in Rugged Terrain.

Digital elevation model generation using multibaseline advanced land observing satellite/phased array type L-band synthetic aperture radar imagery

Distributed Scatterers Selection Combined with Geomorphy for InSAR Deformation Monitoring in Complicated Surface.

Interferometric Phase Error Analysis and Compensation in GNSS-InSAR: A Case Study of Structural Monitoring

Airborne Short-Baseline Millimeter Wave InSAR System Analysis and Experimental Results

Potential of geosynchronous SAR interferometric measurements in estimating three-dimensional surface displacements

Exploitation of SRTM DEM in InSAR data processing and its application to phase unwrapping

Ground-Based ArcSAR Interferometry and Sensitivity Analysis

Terrain Point Cloud Assisted GB-InSAR Slope and Pavement Deformation Differentiate Method in an Open-Pit Mine

A Review Of Ten-Year Advances Of Multi-Baseline Sar Interferometry Using Terrasar-X Data

Generation and Error Analysis of Dem Using Spaceborne Polarimetric Sar Interferometry Data