Abstract:To improve the mechanical properties of anion exchange membranes (AEMs) with bulky imidazolium cations, a series of anion-conductive poly(2,6-dimethyl-phenylene oxide)s (PPO)s with crosslinkable terminal double bonds were synthesized by the Menshutkin reaction. Following crosslinking via olefin metathesis at room temperature catalyzed by a Grubb's second generation catalyst, tough, transparent, and flexible PPO-based AEMs were obtained. The crosslinked AEMs exhibited good mechanical properties (tensile strength at maximum load of 20.8-49.9 MPa and values of elongation at break of 1.5-3.0%) though their bulky imidazolium cation groups which could destroy the film-forming ability of polymer. And the obtained mechanical properties were considerably better than those of the non-crosslinked AEMs with a similar architecture, which broke into small pieces during the process of membrane fabrication using solvent casting. Furthermore, the crosslinked AEMs exhibited an extremely low water uptake (up to 13.9 wt% at 80 degrees C) and minimal swelling (<7% at 80 degrees C), attributed to the high-density crosslinking network. A high bromide conductivity (22.9 mS/cm at 80 degrees C) was achieved despite the low water uptake for the crosslinked AEM. Moreover, long-term alkaline stability testing in 1 M NaOH at 80 degrees C, no obvious degradation of the imidazolium ring was observed, with the conductivity of aged crosslinked membranes remaining at similar to 100% after 960 h. It was assumed that the bulky substituents at the C2, C4, and C5 positions of imidazolium cations and the crosslinked architecture prevented H2O and/or OH- from attacking the cationic center. Moreover, the AEM fuel cell performance and durability was further explored for the membrane electrode assembly (MEA) with crosslinked and uncrosslinked bulky imidazolium-based ionomers in catalyst layers. An optimistic cell performance (a peak power density of 173 mW/cm(2) at 410 mA/cm(2)) and improved short-term durability at a constant current density of 200 mA/cm(2) were obtained for the crosslinked ionomers, and its lifetime was ca. 3 times longer than that of benzyltrimethylammonium functionalized PPO ionomer.

Aggregated and Ionic Cross-Linked Anion Exchange Membrane with Enhanced Hydroxide Conductivity and Stability

LDH Nanosheets Anchored on Bacterial Cellulose-Based Composite Anion Exchange Membranes for Significantly Enhanced Strength and Ionic Conductivity

Novel Cross-Linked Anion Exchange Membranes with Diamines As Ionic Exchange Functional Groups and Crosslinking Groups

Highly conductive fluorine-based anion exchange membranes with robust alkaline durability

A High-Performance Anion Exchange Membrane Based on Poly(arylene Ether Sulfone) with a High Concentration of Quaternization Units

Crown Ether Bridged Anion Exchange Membranes with Robust Alkaline Durability

Anion Exchange Membranes Based on Sulfonated Poly(ether ether ketone) Crosslinked Methylpyrrolidinium Functionalized Poly (vinyl benzyl chloride) with High Chemical Stability

Quaternized Triblock Polymer Anion Exchange Membranes with Enhanced Alkaline Stability

Modification of Hydrophobic Diacid Units for Enhanced Poly(crown ether) Anion-Exchange Membrane Performance

Cross-Linked Poly(vinylbenzyl Chloride) Anion Exchange Membranes with Long Flexible Multihead for Fuel Cells

Dual-cation Comb-Shaped Anion Exchange Membranes: Structure, Morphology and Properties

Anion Exchange Membrane with a Novel Quaternized Ammonium Containing Long Ether Substituent

Poly(arylene Ether Nitrile) Anion Exchange Membranes with Dense Flexible Ionic Side Chain for Fuel Cells

Highly Conductive Anion Exchange Membranes with Long Flexible Multication Spacer

Olefin Metathesis-Crosslinked, Bulky Imidazolium-Based Anion Exchange Membranes with Excellent Base Stability and Mechanical Properties

Recyclable Cross-Linked Anion Exchange Membrane for Alkaline Fuel Cell Application

Improvement the hydroxide conductivity and alkaline stability simultaneously of anion exchange membranes by changing quaternary ammonium and imidazole contents

Crosslinked anion exchange membranes with regional intensive ion clusters prepared from quaternized branched polyethyleneimine/quaternized polysulfone

Novel Quaternized Carbon Dots Modified Polysulfone-Based Anion Exchange Membranes with Improved Performance

Crosslinked Anion Exchange Membrane with Improved Membrane Stability and Conductivity for Alkaline Fuel Cells

Physically and Chemically Stable Anion Exchange Membranes with Hydrogen-Bond Induced Ion Conducting Channels