Abstract:The application of Schiff bases as corrosion inhibitors is one of the economic, practical, and effective techniques to retard metal corrosion in aggressive environment. The continuous exploration of novel, lower -cost, more efficient, and eco-friendly corrosion inhibitors is an everlasting pursuit of excellence. In this study, two 1,4-phenylenediamine-based single Schiff base isomers, (E)-4-((pyridin-2-yl-methylene)amino)aniline (PMAA2) and (E)4-((pyridin-3-ylmethylene)amino)aniline (PMAA3), were synthesized by one-step reaction. The corrosion inhibition mechanism and structure-activity relationship of PMAA2 and PMAA3 for mild steel in HCl solution were analyzed using electrochemical and weight loss experiments, morphology analysis, density functional theory (DFT) calculation, and molecular dynamic (MD) simulation. The results demonstrated that the corrosion inhibition efficiency of PMAA2 and PMAA3 exhibited an increasing trend with the elevation of inhibitor concentration while showing a slight decrease with the temperature rise. The optimal corrosion inhibition efficiency for 800 mg L-1 PMAA2 and PMAA3 in 1.0 mol L-1 HCl solution is 90.88 % and 91.78 % at 303 K respectively by using weight loss experiment. The electrochemical experiment results indicated that PMAA2 and PMAA3 are mixed -type corrosion inhibitors, with a preponderant control of anodic dissolution. Both the thermodynamics of adsorption and the kinetic of corrosion reaction were evaluated and discussed in detail. Their adsorption upon mild steel complies with Langmuir adsorption isotherm and is involved in phys- and chemisorption concurrently. The results from surface morphology analysis exhibited that a dense protective film on the surface of mild steel is formed through inhibitor adsorption, which results in changes in the hydrophilicity and hydrophobicity of the metal surface. The calculations of DFT and Fukui index also indicated that both the neutral and pronated species of PMAA2 and PMAA3 possess donor-acceptor interactions with the surface iron atoms through both forward and back -donations. Furthermore, MD simulations further revealed that the neutral molecules as neat -flat and parallel orientation are adsorbed strongly on the Fe (1 1 0) surface but the pronated species perform in bent fashion on the Fe (1 1 0) surface. Based on the experimental analysis and the theoretical calculation, a possible adsorption and corrosion inhibition mechanism was proposed rationally. These findings display good correlations between the experimental investigation and the theoretical computation and are of fundamental importance to understanding the adsorption and corrosion inhibition mechanisms of the inhibitors.

Investigation of a Hydrophobically Associating AMAHS Polyacrylamides: A New Corrosion Inhibitor for Mild Steel in HCl

Experimental and Theoretical Investigation of 1-Hexyl-3-methylimidazolium Iodide As a Corrosion Inhibitor for Mild Steel in HCl Environment

Investigation of polyacrylamide containing capsaicin monomer as a novel corrosion inhibitor for mild steel in hydrochloric acid

New Corrosion Inhibitor Acrylamide Methyl Ether for Mild Steel in 1 M Hcl

Corrosion inhibition behavior of hydroxyl-terminated hyperbranched poly(amine-ester) for Q235 steel in HCl solution

Maleic Hydrazide Derivative As Green Corrosion Inhibitor for Q235 Mild Steel in 1M HCl: Synthesis, Experiments and Theoretical Studies

Poly(methyl Methacrylate-Co-n-vinyl-2-pyrrolidone Polymer As Inhibitor for Mild Steel Corrosion in Acidic Media

Maleic hydrazide derivative as green corrosion inhibitor for Q235 mild steel in 1 M HCl: synthesis, experiments and theoretical studies

Preparation of methylacridinium iodides self-assembled monolayers and its anti-corrosion properties for mild steel in seawater: Experimental and computational studies

Effective Corrosion Inhibitor of Mild Steel in Marine Environments: Synthesis and Application of Hydrazides

Synthesis of a new quaternary ammonium salt for efficient inhibition of mild steel corrosion in 15 % HCl: Experimental and theoretical studies

Synthesis and evaluation of Tris-hydroxymethyl-(2-hydroxybenzylidenamino)-methane as a corrosion inhibitor for cold rolled steel in hydrochloric acid

High-performance Corrosion Resistance of Chemically-Reinforced Chitosan As Ecofriendly Inhibitor for Mild Steel

Electrochemical, Surface Analysis, and Theoretical Investigation of 3-Hydroxy-5-(phenylamino)-4-(p-tolyldiazenyl)thiophen-2-yl)(phenyl)methanone As a Corrosion Inhibitor for Carbon Steel in a Molar Hydrochloric Acid Solution

Halogen-Substituted Acridines As Highly Effective Corrosion Inhibitors for Mild Steel in Acid Medium

1,4-Phenylenediamine-based Schiff Bases As Eco-Friendly and Efficient Corrosion Inhibitors for Mild Steel in HCl Medium: Experimental and Theoretical Approaches

In-depth experimental assessment of two new aminocoumarin derivatives as corrosion inhibitors for carbon steel in HCl media combined with AFM, SEM/EDX, contact angle, and DFT/MDs simulations

Anticorrosion Action and Adsorption Mechanism of Self assembled Monolayers of Polyamidoamine Schiff-base of PAMAM(1.0G)-Salicylaldehyde on Q235 Steel in Hydrochloric Acid Solution

Experimental and Theoretical Investigation of Novel Ammonium-Derived Dihydroxyl Ionic Liquid As Corrosion Inhibitor for Mild Steel in 1 M HCl: Effects of Dihydroxyl and Head Groups

<i>Apostichopus japonicus</i> polysaccharide as efficient sustainable inhibitor for mild steel against hydrochloric acid corrosion

Apostichopus japonicus polysaccharide as efficient sustainable inhibitor for mild steel against hydrochloric acid corrosion