Impedance Control of Flexible Robot Arms with Parametric Uncertainties

JiangZhao-Hui

2005-01-01

Abstract:This paper presents an adaptive impedance control strategy for flexible manipulators by using an end-effector trajectory control approach. The impedance control objective is converted into tracking...

What problem does this paper attempt to address?

Adaptive Finite-Time Optimised Impedance Control for Robotic Manipulators with State Constraints

Chengpeng Li,Qinyuan Ren,Zuhua Xu,Jun Zhao,Chunyue Song

DOI: https://doi.org/10.1080/00207721.2023.2213230

IF: 2.648

2023-01-01

International Journal of Systems Science

Abstract:In this paper, an adaptive finite-time impedance control strategy based on optimised backstepping (OB) technique is proposed for robotic manipulators subject to state constraints. The existing OB methods approximately solve the intractable Hamilton-Jacobi-Bellman equation by reinforcement learning (RL) with Bellman residual error, which has intricate actor-critic updating laws and persistence excitation requirement. To overcome this drawback, we construct the simplified RL updating laws by converting the problem to the solution of a positive-definite function, which is composed of actor-critic network weights. Then, the simplified RL updating laws can significantly reduce the controller complexity and relax the persistence excitation. Based on the barrier Lyapunov function, a barrier-type performance index function is constructed for the optimised controller under state constraints. The finite-time stability theory can guarantee the finite-time convergence property of the closed loop system without violating the prescribed constraints. Finally, we demonstrate the effectiveness of the proposed method in the simulation example with environment-robot interaction.
End-Effector Robust Trajectory Tracking Control For Flexible Robot Manipulators

Zhao-hui Jiang

DOI: https://doi.org/10.1109/ICSMC.2004.1401223

2004-01-01

Abstract:This paper proposes a robust control strategy for end-effector trajectory tracking of flexible robot manipulators in the presence of parametric uncertain ties and dynamic modeling errors. Using an ideal manifold, the desired performance of the system is described in terms Of vibration damping and end-effector flexural error compensating. The control law, is derived based on the estimated dynamics such that the motion of the system would converge and remain to the ideal manifold for the idea case that the parametric uncertainties and modeling errors can be ignored. To achieve the robustness of the system, the robust control scheme is developed and added into the control system. Stability of the whole control system is investigated using the Lyapunov stability theory. Simulations are carried out to illustrate the effectiveness of the proposed control method.
Unified Motion/Force/Impedance Control for Manipulators in Unknown Contact Environments Based on Robust Model-Reaching Approach

Yinjie Lin,Zheng Chen,Bin Yao

DOI: https://doi.org/10.1109/tmech.2021.3081594

2021-01-01

Abstract:With the developments of intelligent and autonomous robotic technology, robots are usually designed to confront sophisticated tasks such as automated assembly, which requires both high-speed positioning capabilities and compliance with unknown contact environments. As we know, a high-performance motion tracking control in free space can achieve efficient and accurate positioning, while impedance or force control shows superior performance in terms of sensitive force and compliance with unknown contact environments. However, it is still challenging to achieve both high-performance motion tracking and compliance within one single control framework, especially in unknown contact environments. To this end, in this article, a unified motion/force/impedance approach for unknown contact environments is proposed by robust model-reaching control with dynamic trajectory adaptation. Specifically, the overall control scheme includes two loops: the outer loop replans the trajectories of motion and force in real time to meet the environmental constraints, which are estimated by the recursive least squares estimation law; in the inner loop, the robust model-reaching control law is proposed to realize a target model, which is designed to establish a dynamic relationship between the motion and force tracking errors of the replanned trajectories. Then, by changing the matrices of the target model, the compromise between motion tracking and force tracking can be achieved, as well as different control objectives. Experiments are conducted on a seven-degree-of-freedom manipulator to validate the advantages of the proposed scheme.
Impedance Control of Flexible Robot Manipulators

Zhao-Hui Jiang

DOI: https://doi.org/10.5772/6206

2008-01-01

Abstract:Force control is very important for many practical manipulation tasks of robot manipulators, such as, assembly, grinding, deburring that associate with interaction between the end-effector of the robot and the environment. Force control of the robot manipulator can be break down into two categories: Position/Force Hybrid Control and Impedance Control. The former is focused on regulation of both position and manipulation force of the end-effector on the tangent and perpendicular directions of the contact surface. The later, however, is to realize desired dynamic characteristics of the robot in response to the interaction with the environment. The desired dynamic characteristics are usually prescribed with dynamic models of systems consisting of mass, spring, and dashpot. Literature demonstrates that various control methods in this area have been proposed during recent years, and the intensive research has mainly focused on rigid robot manipulators. On the research area of force control for flexible robots, however, only a few reports can be found. Regarding force control of the flexible robot, a main body of the research has concentrated on the position/force hybrid control. A force control law was presented based on a linearized motion equation[l]. A quasi-static force/position control method was proposed for a two-link planar flexible robot [2]. For serial connected flexible-macro and rigid-micro robot arm system, a position/force hybrid control method was proposed [3]. An adaptive hybrid force/position controller was resented for automated deburring[4]. Two-time scale position/force controllers were proposed using perturbation techniques[5],[6]. Furthermore, a hybrid position-force control method for two cooperated flexible robots was also presented [7]. The issue on impedance control of the flexible robot attracts many attentions as well. But very few research results have been reported. An impedance control scheme was presented for micro-macro flexible robot manipulators [8]. In this method, the controllers of the micro arm (rigid arm) and macro arm (flexible arm) are designed separately, and the micro arm is controlled such that the desired local impedance characteristics of end-effector are achieved. An adaptive impedance control method was proposed for n-link flexible robot manipulators in the presence of parametric uncertainties in the dynamics, and the effectiveness was confirmed by simulation results using a 2-link flexible robot [9].
Workspace Adaptive Control of Flexible Robot Arms

ZH Jiang

DOI: https://doi.org/10.1109/icmlc.2002.1175362

2002-01-01

Abstract:This paper presents a workspace adaptive control method for the end-effector trajectory tracking of flexible robot arms in the presence of parametric uncertainties. A manifold is designed to describe the desirable behavior of the robot-system in terms of end-effector trajectory tracking and link vibration damping. A control scheme and the parameter update law are derived such that convergence of the motion of the robot to the designed manifold is guaranteed while the boundedness of parameter estimation is ensured. Stability of the system is verified by using the Lyapunov stability theory. Simulations were carried out to illustrate the effectiveness of the proposed adaptive control method.
A New Impedance Control Method Using Backstepping Approach for Flexible Joint Robot Manipulators

Zhao-Hui Jiang,Tetsuya Irie

DOI: https://doi.org/10.18178/ijmerr.9.6.865-869

2020-01-01

International Journal of Mechanical Engineering and Robotics Research

Abstract:In this paper, we propose a new impedance control method for flexible joint robot manipulators. An ideal nonlinear impedance dynamic model is formulated in the workspace. Three control strategies that meet the requirement of desired impedance dynamics and stability of the whole system are derived by using backstepping control approach. The control system has a cascade structure with the designed three control strategies serially connecting to each other. Stability of the closed-loop system is analyzed using Lyapunov stability theory. Impedance control experiments are carried out on a 2-link flexible joint robot manipulator with a force sensor equipped at the endeffector. The results demonstrate the effectiveness of the proposed impedance control method. 
Impedance Control of Flexible Joint Robots Based on Singular Perturbation Method

Zhao-Hui Jiang,Libo Jiang

DOI: https://doi.org/10.1109/cis-ram47153.2019.9095853

2019-01-01

Abstract:This paper addresses the issue of impedance control of robot manipulators with joint flexibility. First, by using singular perturbation method dynamics of the links (i.e. the joint motion on the link side) and flexible joints are described with a slow motion equation and fast motion equation, separately. Second, an impedance control subsystem is designed for the slow subsystem to meet the desirable impedance dynamics designed in the workspace, and then, a joint vibration control subsystem is designed based on the fast motion model to ensure stability of the system. Simulations are carried out on a two-link flexible joint robot. The results demonstrate the effectiveness of the proposed impedance control method.
Adaptive Impedance Controller Design of Robot's Manipulator Using Nominal Information

Longhe Yang,Yi Han,Bin Xu,Zhen Li

DOI: https://doi.org/10.1109/icarm.2016.7606970

2016-01-01

Abstract:This paper investigates the adaptive impedance control dealing with parameter uncertainties of robot's manipulator. The system uncertainty is modeled as nominal part and unknown part where the known information is provided as basic feedback while adaptive design is put on the estimation. By writing the unknown part into linearly parameterized form, the adaptive controller is designed. The simulation test is presented to show the effectiveness of the proposed approach.
Impedance Model Based Fuzzy Force Control for Robot Manipulator Contacting with a Constrained Surface with Uncertain Errors.

Fei Wang,Zhong Luo,Hongyi Liu,Lei Wang

DOI: https://doi.org/10.1109/robio.2010.5723561

2010-01-01

Abstract:Force control algorithm of the robot manipulator contacting with a constraint surface with uncertain figure and stiffness error is discussed in this paper. To accomplish the accurate parameter less-relying constraint motion, a real-time adjusting fuzzy logic of reference trajectories in impedance model is proposed. The adjustment depends on the real-time force and position feedback. Simulation experiments confirm that the control law is competent for situations where accurate models of the constraint surface can not be obtained.
An Adaptive Impedance Control for Dual-Arm Manipulators Incorporated with the Virtual Decomposition Control

Xin Jing,Loris Roveda,Jianfei Li,Yaobing Wang,Haibo Gao

DOI: https://doi.org/10.1177/10775463231182462

IF: 2.633

2024-01-01

Journal of Vibration and Control

Abstract:The interaction force control problem for the object manipulated by the dual-arm manipulator with the unknown environment is addressed in this paper. An adaptive dual-loop impedance control scheme is designed to meet the three control targets, including the trajectory tracking control of the object, the internal force control of the object with the two arms, and the interaction force control of the object with the unknown environment. Firstly, an adaptive variable impedance control method is proposed in the outer loop to copy with the unknown stiffness and position of the environment. Secondly, an impedance control scheme based on the internal force is designed in the inner loop to plan the internal force and the modified position supplied with the outer-loop control. Thirdly, to realize the reference trajectory supplied with the inner-loop control, the virtual decomposition control (VDC) method is incorporated, which is a recursive adaptive control progress, so that the unknown dynamics of the manipulators is acceptable and the computation complexity is also very low to satisfy the real-time control requirement. The stability verifications of the inner-loop impedance control and the VDC method are given based on the Lyapunov method, and the stability analysis of the outer-loop impedance control is obtained using the Routh criterion. Finally, a plane dual-arm robotic manipulator with three degrees of freedom is used to verify the effectiveness of the proposed control scheme.
Adaptive Impedance Control for Mobile Cooperative Manipulation Systems with Stability and Passivity Guarantees*

Danping Zeng,Yaonan Wang,Yiming Jiang,Haoran Tan,Zhiqiang Miao,Yun Feng

DOI: https://doi.org/10.1109/icarm62033.2024.10715936

2024-01-01

Abstract:A number of robotic tasks exist, such as manipulating heavy and oversized objects, where a single manipulator is not enough and multiple mobile manipulators need to be used. When uncertainty exists, a compliant control strategy is expected to be applied for such a tightly coordinated multiple mobile manipulator system. An adaptive impedance control law that enables adaptive updating of impedance parameters is developed in this work. The proposed method ensures that all closed-loop systems boundedly and asymptotically realize the desired adaptive impedance dynamics. Furthermore, to ensure the passivity of the adaptive impedance system, the impedance system of each mobile manipulator is interconnected with a virtual energy tank, and the update of the impedance system parameters is guided according to the level of the energy to ensure that the adaptive impedance system is passive, thus realizing the adaptive trade-off between compliance and operational accuracy. Finally, a simulation for four mobile manipulators collaborating to carry an unknown object is provided to validate the effectiveness of the proposed one.
Constrained Robotic Manipulator Control with Dynamic Uncertainty Using Impendance Learning

Zheng Shiwen,Fang Lijin,Song Tangzhong

DOI: https://doi.org/10.1109/ccdc58219.2023.10326713

2023-01-01

Abstract:In this paper, we solve the motion control problem of robotic manipulator (RM) in the constrained space using impedance learning and unknown dynamics observer (UDO). An estimation method for dynamic uncertainty designed by low-pass filters is proposed to handle the unknown part of the information of the robotic system, including unknown external disturbance, partially unknown inertia, Coriolis and gravity matrix. Impedance learning will be utilized in the interaction of RM with the external environment to ensure that RM can track the desired trajectory. Then, UDO and impedance learning are added into the controller to achieve the desired effect, and we will verify the stability and error convergence of the observer and controller using Lyapunov function. Finally, several simulation studies are presented to illustrate the effectiveness of the designed controller.
Fuzzy-based variable impedance control of uncertain robot manipulator in the flexible environment: A nonlinear force contact model-based approach

Ying Guo,Jinzhu Peng,Shuai Ding,Jing Liang,Yaonan Wang

DOI: https://doi.org/10.3233/jifs-224250

2023-09-16

Journal of Intelligent & Fuzzy Systems

Abstract:In this paper, a variable impedance control method is proposed for uncertain robotic systems based on a nonlinear force contact-based flexible environmental model. First, a nonlinear force contact model between the rigid manipulator and flexible environment is applied to the compliant control of the manipulator, which can avoid excessive force overshoot that usually exists in the traditional spring-damping environmental model. Then, to achieve better force/position tracking performances, a fuzzy-based adaptive variable impedance controller is designed based on the force contact-based flexible environmental model, where the impedance parameters are adjusted online through the force and position feedback of the robotic system, and the fuzzy logic system is used to compensate the uncertainties. Moreover, the stability of the adaptive variable impedance control scheme is proved by the Routh stability criterion, and the boundness of all the signals in the closed-loop control system is guaranteed by the Lyapunov stability theorem. Finally, the effectiveness of the proposed method is verified by the simulation of a two-link manipulator, and the results demonstrate that the performances of position tracking are improved, while the force overshoot and oscillation time are reduced.
Force Tracking Impedance Control of Robot Manipulators Under Unknown Environment

S. Jung,T.C. Hsia,R.G. Bonitz

DOI: https://doi.org/10.1109/tcst.2004.824320

IF: 4.8

2004-05-01

IEEE Transactions on Control Systems Technology

Abstract:In this paper, a new simple stable force tracking impedance control scheme that has the capability to track a specified desired force and to compensate for uncertainties in environment location and stiffness as well as in robot dynamic model is proposed. The uncertainties in robot dynamics are compensated by the robust position control algorithm. After contact, in force controllable direction the new impedance function is realized based on a desired force, environment stiffness and a position error. The new impedance function is simple and stable. The force error is minimized by using an adaptive technique. Stability and convergence of the adaptive technique are analyzed for a stable force tracking execution. Simulation studies with a three link rotary robot manipulator are shown to demonstrate the robustness of the proposed scheme under uncertainties in robot dynamics, and little knowledges of environment position and environment stiffness. Experimental results are carried out to confirm the proposed controller's performance.

automation & control systems,engineering, electrical & electronic
An Adaptive Impedance Control Method for Human-Robot Interaction.

Yanjiang Huang,Haoyang Chen,Zhaoyu Cui,Xianmin Zhang

DOI: https://doi.org/10.1007/978-981-99-6498-7_45

2023-01-01

Abstract:In human-robot collaborative grinding tasks, the compliance of the robot to the operator is required, while the robot end effector is limited to a certain space to avoid danger. Therefore, an adaptive impedance control method, in which the stiffness coefficient changes with the position of the robot end effector, is proposed in this paper. Based on the Lyapunov method, the stability of the adaptive impedance controller is demonstrated. The results of simulation and experiments show that, with the method proposed in this paper, the operating space of the robot is limited to a certain range, and its compliance to the operator is good.
Integration of Impedance Control and Manipulability Regulation for a Finger-Arm Robot

Jian Huang,Daisuke Yamada,Takayuki Hori,Masayuki Hara,Tetsuro Yabuta

DOI: https://doi.org/10.1109/robot.2009.5152320

2009-01-01

Abstract:Motion control algorithms were proposed for a 9-DOF finger-arm robot by using the finger manipulability obtained in a previous study. However, in the previous study, only methods for achieving unconstrained movement of the finger-arm robot were discussed. In this paper, the authors propose a novel method for having a finger-arm robot complete a constrained task by integrating impedance control with manipulability control of the finger. First, methods of applying the previous heuristic method to the passive impedance control and the active impedance control were developed; and experiments were performed to demonstrate the features. Then, an impedance control combined with the steepest ascent method to modulate the manipulability of the finger was proposed. The proposed method demonstrates a strong performance even when a dynamic external force is applied to the finger. By using the proposed method, the arm actively moves along a direction to effectively maintain the moving potential of the finger during both the unconstrained and the constrained tasks.
An Adaptive Impedance Controller for Robot Manipulators in Task Space

WM Xu,C Shao,TY Chai

DOI: https://doi.org/10.1109/cdc.1996.574341

1996-01-01

Abstract:This paper develops an adaptive impedance controller for robot end-effectors performing tasks in Cartesian space, which does not require any knowledge of either the structure or the parameters of the manipulator dynamic and is implemented without calculation of the robot inverse kinematic transformation. The scheme is computationally efficient and is implementable with both nonredundant and redundant manipulators
Adaptive Object Impedance Control of Dual-Arm Cooperative Humanoid Manipulators

Yi Ren,Yang Zhou,Yechao Liu,Minghe Jin,Hong Liu

DOI: https://doi.org/10.1109/wcica.2014.7053267

2014-01-01

Intelligent Control and Automation

Abstract:A novel adaptive object impedance control strategy is presented for dual-arm cooperative humanoid manipulators. A general impedance scheme comprising internal impedance control and object impedance control is adopted, which aims at conferring a compliant behavior both in end-effector level and object lever. The adaptation law for the stiffness and damping of object impedance is derived from Lyapunov stability theory. In contrast with general object impedance, the proposed controller can exhibit different impedance characteristics according to the force exerted by environment on the object and can achieve minimizing the metabolic cost of the adaptation process. Simulation results show the object impedance controller exhibits explicit compliance behavior when the interaction with environment is weak and presents accumulation property of the stiffness and damping when the interaction is strong.
Adaptive Hybrid Impedance Control for A Dual-arm Robot Manipulating an Unknown Object.

Chunting Jiao,Xiong Wei,Han Zhao,Xiaojie Su

DOI: https://doi.org/10.1109/iecon43393.2020.9254995

2020-01-01

Abstract:In this paper, a novel adaptive hybrid impedance control for a dual-arm robot is proposed to cooperatively manipulate unkown objects. This adaptive hybrid control scheme could be employed to improve motion tracking and internal force regulation performance when dual-arm cooperative robot grasping an unknown object. The controller has a master-slave structure, and we investigate the master-slave structure in three levels. The first level is an absolute-relative motion controller satifying the closed-chain constraints. The second level introduces an adaptive impedance control with variable stiffness to regulate the internal force. The motion and force control signals are fused in the third level by a select matrix. To verify the effectiveness of the algorithm, a dua-larm robotic system is set up with two UR5 arms and the experimental results illustrate the performance and feasibility of the proposed control strategy.
Adaptive Control of Flexible Joint Manipulators with Parameter Convergence

Chang Li,Yuling Li,Yixin Yin,Sen Zhang,Jie Dong

DOI: https://doi.org/10.23919/chicc.2019.8865481

2019-01-01

Abstract:This paper is focused on the adaptive control design for flexible joint robots with parameter uncertainties. Based on the singular perturbation theory, the flexible joint robot is transformed into a fast subsystem and a slow subsystem. For the fast subsystem, the PD control strategy is used to suppress elastic oscillations by the feedback of the motor angular displacement error. For the slow subsystem, an adaptive control scheme is proposed to guarantee the parameter estimation error convergence. The closed-loop system is testified to be globally exponentially stable via the designed Lyapunov function. The comprehensive simulation results demonstrate great tracking precision and high robustness of the proposed control scheme.

Impedance Control of Flexible Robot Arms with Parametric Uncertainties

Adaptive Finite-Time Optimised Impedance Control for Robotic Manipulators with State Constraints

End-Effector Robust Trajectory Tracking Control For Flexible Robot Manipulators

Unified Motion/Force/Impedance Control for Manipulators in Unknown Contact Environments Based on Robust Model-Reaching Approach

Impedance Control of Flexible Robot Manipulators

Workspace Adaptive Control of Flexible Robot Arms

A New Impedance Control Method Using Backstepping Approach for Flexible Joint Robot Manipulators

Impedance Control of Flexible Joint Robots Based on Singular Perturbation Method

Adaptive Impedance Controller Design of Robot's Manipulator Using Nominal Information

Impedance Model Based Fuzzy Force Control for Robot Manipulator Contacting with a Constrained Surface with Uncertain Errors.

An Adaptive Impedance Control for Dual-Arm Manipulators Incorporated with the Virtual Decomposition Control

Adaptive Impedance Control for Mobile Cooperative Manipulation Systems with Stability and Passivity Guarantees*

Constrained Robotic Manipulator Control with Dynamic Uncertainty Using Impendance Learning

Fuzzy-based variable impedance control of uncertain robot manipulator in the flexible environment: A nonlinear force contact model-based approach

Force Tracking Impedance Control of Robot Manipulators Under Unknown Environment

An Adaptive Impedance Control Method for Human-Robot Interaction.

Integration of Impedance Control and Manipulability Regulation for a Finger-Arm Robot

An Adaptive Impedance Controller for Robot Manipulators in Task Space

Adaptive Object Impedance Control of Dual-Arm Cooperative Humanoid Manipulators

Adaptive Hybrid Impedance Control for A Dual-arm Robot Manipulating an Unknown Object.

Adaptive Control of Flexible Joint Manipulators with Parameter Convergence