Abstract:Structural Health Monitoring, Ahead of Print. Ultrasonic-guided waves full wavefield scanning technology can realize non-destructive testing with non-contact. The damage detection method based on ultrasonic-guided waves' full wavefield data is widely used in thin-walled plate structures. The defect imaging method based on full wavefield data faces the challenge of simultaneously obtaining the defect contour and thickness direction information. Based on the ultrasonic-guided waves full wavefield scanning detection technology, this paper proposes a multi-time Lamb waves space wavenumber imaging method. In this method, the analytic signal of Lamb wavefield at each moment is constructed by Hilbert transform, and the phase unwrapping is carried out by amplitude sorting and multi-clustering method. Then the wavenumber information is obtained by calculating the phase gradient. The wavenumber at different times of each measurement point is arranged in descending order, and the median wavenumber is extracted as the wavenumber at each measurement point. Based on the dispersion relationship of the tested specimen, the quantitative detection of the plate thickness in the detection area is realized. This method is first applied to the simulation model. Then it is applied to the defect imaging and quantitative detection of aluminum plates with rectangular groove defects and carbon fiber reinforced plastics (CFRP) plates with delamination defects. In simulation and experiment, the local wavenumber imaging method, the frequency domain instantaneous wavenumber imaging method, and the multi-time Lamb waves space wavenumber imaging method are used for defect imaging and quantification. The imaging results are compared and analyzed. The result shows that the multi-time Lamb waves space wavenumber imaging method can restore the morphology of groove defects in aluminum plates and delamination defects in CFRP plates, and accurately estimate the depth of groove defects and the location of delamination defects.

Location of Micro-Cracks in Plates Using Time Reversed Nonlinear Lamb Waves

Micro-Crack Detection Of Nonlinear Lamb Wave Propagation In Three-Dimensional Plates With Mixed-Frequency Excitation

INTEGRATED TECHNOLOGY FOR DETECTION AND REPAIR OF MECHANICAL COMPONENT SURFACE FATIGUE MICROCRACKS USING PULSED LASER

Evolving Fatigue Damage Detection Based on Multi-Component Nonlinear Modulation Mechanism of Tuned Laser-Generated Rayleigh Waves

A Study of Inner Crack Testing with the Laser Phased Array Method.

Nonlinear Responds of Lamb Waves in Plate Structure with Micro-Crack Using Frequency-Mixing Technique

Microcrack localization using a collinear Lamb wave frequency-mixing technique in a thin plate

Nonlinear Nonclassical Acoustic Method For Detecting The Location Of Cracks

Ultrasonic Nonlinear Responses of a Closed Crack in Plate-like Structure

Nonlinear ultrasonic detection of partially closed cracks in metal plates using static component of lamb waves

Simulation of multi-cracks in solids using nonlinear elastic wave spectroscopy with a time-reversal process

In-situ sparse-array imaging for through-thickness cracks in plates with A0 Lamb waves and an efficient waveform inversion algorithm

Imaging of Closed Cracks by Water-Coupled Sensor Array Based on Nonlinear Lamb Waves

Detection and localization of closely distributed damages via lamb wave sparse reconstruction

Micro-crack in solids evaluation based on zero-frequency component of the critically refracted longitudinal wave

Quantitative Detection of Small Crack by Nonlinear Laser Ultrasonics

Solutions of Non-Classical Nonlinear Acoustics Wave Equation in a Conical Bar with Micro-Cracks

Research on nonlinear ultrasonic NDT of microcracks

A simulation study of ultrasonic imaging of micro-crack in bone based on time-reversed approach

Numerical Simulation of the Interaction of Laser-Generated Rayleigh Waves with Subsurface Cracks

Multi-time Lamb waves space wavenumber imaging method based on ultrasonic-guided wavefield