9-Substituted Acridines As Effective Corrosion Inhibitors for Mild Steel: Electrochemical, Surface Morphology, and Computational Studies

Weiwei Zhang,Ying Liu,Yinlin Zhang,Li-Juan Wang,Yan-Chao Wu,Hui-Jing Li

DOI: https://doi.org/10.1039/d0nj00440e

IF: 3.3

2020-01-01

New Journal of Chemistry

Abstract:The inhibition performance and mechanism of mild steel in hydrochloric acid for 9-substituted acridines were studied for the first time.

What problem does this paper attempt to address?

Experimental and Theoretical Investigation of 1-Hexyl-3-methylimidazolium Iodide As a Corrosion Inhibitor for Mild Steel in HCl Environment

Baoyi Li,Lei Guo,Xueli Bai,Shengjian Zhang,Zerui Zhang,Huiru Zhou,Hongmei Dong,Yusheng Li

DOI: https://doi.org/10.1016/j.ijoes.2024.100580

IF: 1.541

2024-01-01

International Journal of Electrochemical Science

Abstract:This study employed 1-Hexyl-3-methylimidazolium iodide to mitigate the corrosion of Q235 steel in a hydrochloric acid environment. The evaluation of corrosion inhibition effectiveness was comprehensively characterized by combining electrochemical experiments with surface morphology observation. The experimental results demonstrated the capability of the ionic liquid in establishing a film layer on the surface of Q235 steel, which effectively hindered the charge transfer process. Notably, the corrosion inhibition efficiency attained a value of 92.3% at a concentration of 1mM corrosion inhibitor. Moreover, the process of the corrosion inhibitor adhering to the steel surface aligns with the Langmuir isotherm, demonstrating physicochemical adsorption behavior. The density functional theory (DFT) and molecular dynamics (MD) simulation were utilized for further exploration of the corrosion inhibition mechanism, and the results indicate the ionic liquid can be adsorbed onto the (110) surface of Fe in parallel through N atoms on the imidazole ring.
Halogen-Substituted Acridines As Highly Effective Corrosion Inhibitors for Mild Steel in Acid Medium

Weiwei Zhang,Hui-Jing Li,Meirong Wang,Li-Juan Wang,Fei Shang,Yan-Chao Wu

DOI: https://doi.org/10.1021/acs.jpcc.8b07015

2018-01-01

Abstract:A series of acridines were designed and synthesized for the development of effective inhibitors for mild steel corrosion in 1 M HCl solution, in which the halogen-substituted acridines showed better inhibitive performance than the nonhalogen-substituted acridines. The corrosion protection properties of the halogen-substituted acridines, including 2-chloro-9-phenylacridine (CPA), 2-chloro-9-(2-fluorophenyl)acridine (CFPA), and 2-bromo-9-(2-fluorophenyl)acridine (BFPA), were further investigated using weight loss test and electrochemical techniques. The results indicated the halogen-substituted acridines have excellent inhibitiion performance, and these acridines act as mixed-type inhibitors with predominant cathodic effectiveness. Adsorption of acridines on a mild steel surface obeyed the Langmuir adsorption isotherm. The adsorption of the inhibitor molecules on the steel surface was further supported by scanning electron microscopy (SEM), scanning electrochemical microscopy (SECM), and FTIR spectroscopy. The inhibition mechanism of the investigated halogen-substituted acridines was derived using DFT-based quantum chemical calculations for their neutral as well as protonated forms. Both experimental and DFT studies suggested that the inhibition efficiency of three halogen-substituted acridines followed the order of eta(BFPA) > eta(CFPA) > eta(CPA).
Comparison of Synergistic Effect of Counterions on Corrosion Inhibition of Mild Steel in Acid Solution: Electrochemical, Gravimetric and Thermodynamic Studies

Li Bai,La-Jun Feng,Hong-Yan Wang,Yong-Bin Lu,Xiao-Wei Lei,Fang-Lin Bai

2014-01-01

Abstract:a School of Materials Science and Engineering, Xi’an University of Technology, Xi’an 710048, P.R. China b School of Chemistry and Chemical Engineering, Shaanxi Normol University, Xi’an 710119, P. R. China c Research Institute of Yanchang Petroleum (Group) CO. LTD, Xi’an 710075, P.R. China d State Key Laboratory for Mechanical Behavior of Materials, Xi’an Jiaotong University, Xi’an 710049, P.R. China Corresponding author. Tel.: +46 0729428391. E-mail address: hongyan-wang@snnu.edu.cn (H. Y. Wang).
Electrochemical and Quantum Chemical Studies of Azoles As Corrosion Inhibitors for Mild Steel in Hydrochloric Acid

Weiwei Zhang,Rui Ma,Shuai Li,Yu Liu,Lin Niu

DOI: https://doi.org/10.1007/s40242-016-6084-8

IF: 3.1

2016-01-01

Chemical Research in Chinese Universities

Abstract:The inhibition effect of three azole compounds, 2-aminobenzimidazole(ABM), 2-aminothiazole(AT) and 2-aminobenzothiazole(ABT), on the corrosion of mild steel in a 1 mol/L HCl solution was investigated by means of potentiodynamic polarization measurement, electrochemical impedance spectroscopy(EIS) and scanning electron microscopy( SEM). The correlation between inhibition efficiency and molecular structure of inhibitor was theoretically studied via quantum chemical calculations. The results show that the inhibition efficiency(η) of the inhibitors follows the order of η ABT>η AT>η ABM. Moreover, ABM, AT and ABT belong to mixed-type inhibitors. The adsorption of the inhibitors on the steel surface follows the Langmuir adsorption isotherm, with both physisorption and chemisorption.
Experimental and Theoretical Study on the Inhibition Performances of Quinoxaline and Its Derivatives for the Corrosion of Mild Steel in Hydrochloric Acid

haishan zang,jiajun fu,ying wang,suning li,xiaodong liu,tao chen

DOI: https://doi.org/10.1021/ie202832e

2012-01-01

Industrial & Engineering Chemistry Research

Abstract:The inhibition of mild steel corrosion in 1.0 M HCl solution by quinoxaline and its derivatives were evaluated at 25 degrees C using weight loss measurement and Tafel polarization technique. These measurements reveal that the inhibition efficiency increased with increase in the concentrations of inhibitors, and the inhibition efficiencies decrease in the order 4-(quinoxalin-2-yl)phenol (PHQX) > 2-quinoxalinethiol (THQX) > 2-chloroquinoxaline (CHQX) > quinoxaline (QX). Tafel polarization curves show that all the investigated inhibitors act as mixed-type inhibitors. Quantum chemical calculation was applied to correlate electronic structure parameters of quinoxaline and its derivatives with their inhibition performances. Molecular dynamics simulations were also used to optimize the equilibrium configurations of the inhibitor molecules on the iron surface. The efficiency order of the studied inhibitors obtained by experimental results was verified by theoretical calculations.
Comparison of the Synergistic Effect of Counterions on the Inhibition of Mild Steel Corrosion in Acid Solution: Electrochemical, Gravimetric and Thermodynamic Studies

Li Bai,La-Jun Feng,Hong-Yan Wang,Yong-Bin Lu,Xiao-Wei Lei,Fang-Lin Bai

DOI: https://doi.org/10.1039/c4ra12286k

IF: 4.036

2015-01-01

RSC Advances

Abstract:Quinoline quaternary ammonium salts 1-benzylquinoline bromide (1) and 1-benzylquinoline chloride (2) have been synthesized and then developed as corrosion inhibitors in acidic HCl solution.
Gravimetric, Electrochemical and Surface Studies on the Anticorrosive Properties of 1-(2-pyridyl)-2-thiourea and 2-(Imidazol-2-yl)-pyridine for Mild Steel in Hydrochloric Acid

Weiwei Zhang,Hui-Jing Li,Yiwei Wang,Ying Liu,Qing-Ze Gu,Yan-Chao Wu

DOI: https://doi.org/10.1039/c8nj01762j

IF: 3.3

2018-01-01

New Journal of Chemistry

Abstract:1-(2-Pyridyl)-2-thiourea and 2-(imidazol-2-yl)-pyridine are described here for the first time as inhibitors of mild steel corrosion in acidic medium.
Novel Triazolyl Bis-Amino Acid Derivatives Readily Synthesized Via Click Chemistry As Potential Corrosion Inhibitors for Mild Steel in Hcl

Qiong Deng,Hong-Wei Shi,Na-Na Ding,Bao-Qin Chen,Xiao-Peng He,Guixia Liu,Yun Tang,Yi-Tao Long,Guo-Rong Chen

DOI: https://doi.org/10.1016/j.corsci.2011.12.014

IF: 7.72

2012-01-01

Corrosion Science

Abstract:Triazolyl bis-amino acid derivatives readily synthesized via click chemistry were identified as novel potent corrosion inhibitors for mild steel in HCl. The inhibitive characteristic of compound 4 was studied in detail via gravimetric measurement, electrochemical impedance spectroscopy, potentiodynamic polarization and scanning electron microscopy. In addition, a quantum chemical study suggests that the triazole ring involved in these inhibitors is structurally essential for the protection of metal surface.
Nicotinic acid derivatives as corrosion inhibitors for mild steel in hydrochloric acid solutions: an experimental and computational chemistry study

Xia Liu,Xuemei Pan,Meiheng Lu,Yue Sun,Zhengbin Wang,Yugui Zheng

DOI: https://doi.org/10.1080/01694243.2020.1787934

IF: 2.431

2020-07-06

Journal of Adhesion Science and Technology

Abstract:The inhibition performance and mechanism of nicotinic acid (NA), nicotinic acid amide (NAA) and 4-methoxypyridine (MP) for the corrosion of mild steel in 0.5 M HCl solution were investigated and compared by means of experimental tests, including potentiodynamic polarization and electrochemical impedance spectroscopy measurements, surface analyses and quantum chemistry calculation. The electrochemical results show that the inhibition efficiencies of the three inhibitors increase with the concentration and decrease with the temperature. The NAA and MP inhibitors exhibit the highest and lowest efficiency and activation energy for the corrosion process, respectively, which is confirmed by the corrosion morphology observation. Fourier transform infrared analysis and X-ray photoelectron spectroscopy (XPS) analysis confirm the spontaneous adsorption of all three inhibitors on the surface. The adsorption analysis demonstrates that the adsorption process follows Langmuir model and consists of both physisorption and chemisorption. The quantum chemistry calculation correlates the molecular structures and charge density distributions with the corrosion inhibition efficiencies of NAA, NA and MP inhibitors, and further proves that the good inhibition performance of NAA inhibitor originates its high adsorption ability.

materials science, multidisciplinary,engineering, chemical,mechanics
Halogen-substituted Imidazoline Derivatives As Corrosion Inhibitors for Mild Steel in Hydrochloric Acid Solution

Kegui Zhang,Bin Xu,Wenzhong Yang,Xiaoshuang Yin,Ying Liu,Yizhong Chen

DOI: https://doi.org/10.1016/j.corsci.2014.10.032

IF: 7.72

2015-01-01

Corrosion Science

Abstract:Two novel imidazoline derivatives, 2-(2-trifluoromethyl-4,5-dihydro-imidazol-1-yl)-ethylamine (1-IM) and 2-(2-trichloromethyl-4,5-dihydro-imidazol-1-yl)-ethylamine (2-IM), have been investigated as corrosion inhibitors for mild steel in 0.5 M HCI solution by weight loss, potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) tests. The surface morphology of sample was presented through scanning electron microscope (SEM) and the inhibition mechanism was elucidated by measuring the potential of zero charge (E-pzc) at the solid/liquid interface. Results of theoretical calculation confirm that the chloride-substituted compound shows better inhibitive performance than the fluoride-substituted one. (C) 2014 Elsevier Ltd. All rights reserved.
Some New Triazole Derivatives As Inhibitors for Mild Steel Corrosion in Acidic Medium

Wei-hua Li,Qiao He,Sheng-tao Zhang,Chang-ling Pei,Bao-rong Hou

DOI: https://doi.org/10.1007/s10800-007-9437-7

IF: 2.925

2007-01-01

Journal of Applied Electrochemistry

Abstract:Two triazole derivatives, 3,4-dichloro-acetophenone-O-1′-(1′,3′,4′-triazolyl)-methaneoxime (4-DTM) and 2,5-dichloro-acetophenone-O-1′-(1′,3′,4′-triazolyl)-methaneoxime (5-DTM) were synthesized, and the inhibition effects for mild steel in 1 M HCl solutions were investigated by weight loss measurements, electrochemical tests and scanning electronic microscopy (SEM). The weight loss measurements showed that these compounds have excellent inhibiting effect at a concentration of 1.0 × 10−3 M. The potentiodynamic polarization experiment revealed that the triazole derivatives are inhibitors of mixed-type and electrochemical impedance spectroscopy (EIS) confirmed that changes in the impedance parameters (R ct and C dl) are due to surface adsorption. The inhibition efficiencies obtained from weight loss measurements and electrochemical tests were in good agreement. Adsorption followed the Langmuir isotherm with negative values of the free energy of adsorption \( \Updelta G^{o}_{{{\text{ads}}}} \). The thermodynamic parameters of adsorption were determined and are discussed. Results show that both 4-DTM and 5-DTM are good inhibitors for mild steel in acid media.
The effect of some triazole derivatives as inhibitors for the corrosion of mild steel in 1 M hydrochloric acid

Shengtao Zhang,Zhihua Tao,Weihua Li,Baorong Hou

DOI: https://doi.org/10.1016/j.apsusc.2008.09.089

IF: 6.7

2009-01-01

Applied Surface Science

Abstract:Corrosion inhibition by some new triazole derivatives on mild steel in 1M hydrochloric acid solutions has been investigated by weight loss test, electrochemical measurement, scanning electronic microscope analysis and quantum chemical calculations. The results indicate that these compounds act as mixed-type inhibitors retarding the anodic and cathodic corrosion reactions and do not change the mechanism of either hydrogen evolution reaction or mild steel dissolution. The studied compounds following the Langmuir adsorption isotherm, and the thermodynamic parameters were determined and discussed. The effect of molecular structure on the inhibition efficiency has been investigated by ab initio quantum chemical calculations. The electronic properties such as highest occupied molecular orbital (HOMO), lowest unoccupied molecular orbital (LUMO) energy levels, energy gap (LUMO–HOMO), dipole moment and molecular orbital densities were calculated.
Experimental and Quantum Chemical Studies on Two Triazole Derivatives As Corrosion Inhibitors for Mild Steel in Acid Media

W. Li,L. Hu,Z. Tao,H. Tian,B. Hou

DOI: https://doi.org/10.1002/maco.201005965

2011-01-01

Abstract:Two triazole derivatives [1-phenyl-2-(5-(1,2,4) triazol-1-ylmethyl-(1,3,4) oxadizaol-2-ylsulphanyl)-ethanone (PTOE) and 2-(4-tert-butyl-benzylsulphanyl)-5-(1,2,4) triazol-1-ylmethyl-(1,3,4) oxadiazole (TBTO)] were synthesized as new corrosion inhibitors for the corrosion of mild steel in 1 M hydrochloric acid solutions. The inhibiting efficiency of the different inhibitors was evaluated by means of weight loss and electrochemical techniques such as electrochemical impedance spectroscopy (EIS) and polarization curves. The electrochemical investigation results indicate that these compounds act as mixed-type inhibitors retarding the anodic and cathodic corrosion reactions and do not change the mechanism of either hydrogen evolution reaction or mild steel dissolution. The studied compounds followed the Langmuir adsorption isotherm, and the thermodynamic parameters were determined and discussed. The effect of molecular structure on the inhibition efficiency has been investigated with ab initio calculations. The electronic properties such as highest occupied molecular orbital (HOMO) energy level, lowest unoccupied molecular orbital (LUMO) energy level, dipole moment (mu) and molecular orbital densities were calculated.
Quinoxaline Derivatives as Newly Acid Corrosion Inhibitors for Mild Steel: Synthesis, Electrochemical, and Theoretical Investigations

Rbaa, M.,Zarrouk, A.

DOI: https://doi.org/10.1007/s40735-023-00750-z

2023-03-18

Journal of Bio- and Tribo-Corrosion

Abstract:The inhibition effect of novel quinoxaline-derived compounds (Q3 and Q4) on the corrosion of mild steel in 1.0 M HCl solution was studied using gravimetry, potentiodynamic polarization and electrochemical impedance spectroscopy. The impact of temperature and inhibitor concentration was studied to illustrate the mechanism of inhibition. The data showed that quinoxaline derivatives (Q3 and Q4) are good inhibitors of mild steel corrosion in 1.0 M HCl solution. The inhibition is based on the adsorption of the steel into the HCl solution. The inhibition is based on adsorption phenomena, which is consistent with the Langmuir adsorption model. The inhibition efficiency increases with the concentration of Q3 and Q4 to reach a maximum value of 96.9% and 95.7%, respectively, at 0.001 M and 25 °C. Potentiodynamic polarization data confirmed that quinoxaline derivatives behave as a mixed-type inhibitor. Thermodynamic parameters indicate that both quinoxaline compounds (Q3 and Q4) are adsorbed on the steel surface due to the Langmuir isotherm. DFT calculations and DM simulations were performed on the quinoxaline-derived inhibitor to correlate with the experimental data. The results obtained by the different methods are in good agreement.
Synthesis, Evaluation and Thermodynamics of A 1H-Benzo-imidazole Phenanthroline Derivative As A Novel Inhibitor for Mild Steel Against Acidic Corrosion

Xiaowei Lei,Hongyan Wang,Yaorong Feng,Jianxun Zhang,Xuejiao Sun,Suming Lai,Zhilong Wang,Song Kang

DOI: https://doi.org/10.1039/c5ra15002g

IF: 4.036

2015-01-01

RSC Advances

Abstract:A novel 1H-benzo-imidazole phenanthroline derivative was synthesized as an effective inhibitor for mild steel against HCl corrosion.
Theoretical Studies of Three Triazole Derivatives As Corrosion Inhibitors for Mild Steel in Acidic Medium

Lei Guo,Shanhong Zhu,Shengtao Zhang,Qiao He,Weihua Li

DOI: https://doi.org/10.1016/j.corsci.2014.06.040

IF: 7.72

2014-01-01

Corrosion Science

Abstract:Corrosion inhibitive performance of 4-chloro-acetophenone-O-1'-(1'.3'.4'-triazolyl)-metheneoxime (CATM), 4-fluoro-acetophenone-O-1'-(1'.3'.4'-triazolyl)-metheneoxime (FATM), and 3,4-dichloro-acetophenone-O-1'41'.3'.4'-triazolyl)-metheneoxime (DATM) during the acidic corrosion of mild steel surface was investigated using density functional theory (DFT). Quantum chemical parameters such as the highest occupied molecular orbital energy (E-HOMO), the lowest unoccupied molecular orbital energy (E-LUMO), energy gap (Delta E), Mulliken charges, hardness (xi), dipole moment (mu), and the fraction of electrons transferred (Delta N), were calculated. Quantitative structure activity relationship (QSAR) approach has been used, and a composite index of above-mentioned descriptors was performed to characterize the inhibition performance of the studied molecules. Furthermore, Monte Carlo simulation studies were applied to search for the best configurational space of iron/triazole derivative system. (C) 2014 Elsevier Ltd. All rights reserved.
Excellent Corrosion Inhibition Performance of Novel Quinoline Derivatives on Mild Steel in HCl Media: Experimental and Computational Investigations

Lu Jiang,Yujie Qiang,Zulei Lei,Jianing Wang,Zhongjian Qin,Bin Xiang

DOI: https://doi.org/10.1016/j.molliq.2018.01.133

IF: 6

2018-01-01

Journal of Molecular Liquids

Abstract:The inhibition performance of two synthesized quinoline derivatives: 6-benzylquinoline (BQ) and 6-(quinolin-6-ylmethyl) benzene-1,2,3,4,5-pentasulfonic acid (QBPA) on mild steel in 1 M HCl has been investigated through weight loss, electrochemical measurements, scanning electron microscopy (SEM), and atomic force microscopy (AFM). All experimental results indicated that BQ and QBPA extremely enhanced the corrosion resistance of mild steel and QBPA showed a better inhibitive performance than BQ. The results of potentiodynamic polarization illustrated that BQ and QBPA performed as mixed-type inhibitors. Langmuir adsorption isotherm was well fitted for the adsorption of BQ and QBPA on mild steel surface with a competitive physisorption and chemisorption mechanism. The results of quantum chemical calculations and molecular dynamic simulations showed that benzene rings of both BQ and QBPA adsorbed on the metal surface in distinct gradient direction and quinoline ring of both BQ and QBPA adsorbed nearly parallel on the steel surface. (C) 2018 Elsevier B.V. All rights reserved.
Synergistic Inhibition Effect of 9-(4-chlorophenyl)-1,2,3,4-tetrahydroacridines and Tween-80 for Mild Steel Corrosion in Acid Medium

Weiwei Zhang,Yiwei Wang,Hui-Jing Li,Yinghui Liu,Ran Tao,Shuyan Guan,Yihao Li,Yan-Chao Wu

DOI: https://doi.org/10.1021/acs.jpcc.9b02595

2019-01-01

Abstract:The synergistic inhibition effect of Tween-80 and 1,2,3,4-tetrahydroacridines, including 9-(4-chlorophenyl)-2-methyl-1,2,3,4-tetrahydroacridine (CMT) and ethyl 9-(4-chlorophenyl)-1,2,3,4-tetrahydroacridine-2-carboxylate (ECT), on mild steel corrosion in 1 M HCl was investigated by using weight loss tests, electrochemical techniques, and surface morphology (SEM/SECM). The results indicated that the mixtures of CMT/ECT and Tween-80 strongly inhibit the corrosion of mild steel compared to individual inhibitors, and the adsorption mode belongs to the Langmuir isothermal type. Electrochemical measurements showed that the mixtures were mixed-type inhibitors, and a double-layer structure film with the inner layer of Tween-80 and the outer layer of CMT/ECT was formed on the steel surface. That the calculated synergistic parameter value was larger than unity illustrates that the enhancement of inhibition in the presence of Tween-80 is only due to synergistic action. Surface analysis techniques (SEM/SECM) verified that CMT and ECT were absorbed on the steel surface along with Tween-80 in the presence of mixtures, effectively controlling the metal corrosion.
Electrochemical and Quantum-Chemical Study on Newly Synthesized Triazoles As Corrosion Inhibitors of Mild Steel in 1 M Hcl

Ying Yan,Xiaoxiao Lin,Lehua Zhang,Hao Zhou,Laiming Wu,Lankun Cai

DOI: https://doi.org/10.1007/s11164-016-2816-0

IF: 3.134

2016-01-01

Research on Chemical Intermediates

Abstract:Several newly synthesized triazoles including 1-(2″-nitrobenzyl)methenylideneamino-2-mercapto-5-(1′-(1′,2′,4′-triazol)) methenyl-1,3,4-triazole (NMTT), 1-(2″-methoxybenzyl)methenylideneamino-2-mercapto-5-(1′-(1′,2′,4′-triazol)) methenyl-1,3,4-triazole (MMTT), and 1-((4″-chlorobenzyl)methenylideneamino-2-mercapto-5-(1′-(1′,2′,4′-triazol)) methenyl-1,3,4-triazole (CMTT) were studied as corrosion inhibitors of mild steel in 1 M HCl by weight loss measurements, electrochemical experiments, and quantum-chemical calculations. The experimental results show that these compounds have high inhibition efficiency in the order CMTT > MMTT > NMTT. CMTT at concentration of 1.0 × 10−3 M showed the highest inhibition efficiency of 96.4 %. The adsorption of the inhibitors on the metal surface obeyed the Langmuir isotherm, and the basic adsorption mechanism is proposed based on quantum-chemical calculations.
Experimental and Theoretical Investigation of Corrosion Inhibition Effect of Multi-Active Compounds on Mild Steel in 1 M HCl

Shulei Fu,Shengtao Zhang,Qin Xiang,Weiya Tan,Wenpo Li,Shijin Chen,Lei Guo

DOI: https://doi.org/10.20964/2019.07.77

IF: 1.541

2019-01-01

International Journal of Electrochemical Science

Abstract:The corrosion resistance of three compounds, namely, thiabendazole (TBD), benzimidazole (BD), and thiazole (TA) on Q235 steel in 1 M HCl medium were investigated with electrochemical experiments, surface analysis and theoretical calculations. The results received by electrochemical experiments are consistent with the surface morphology observation including FE-SEM and AFM, which indicates that the efficiency of TBD is higher than BD and TA. The adsorption of all corrosion inhibitors on the steel surface follows the Langmuir adsorption isotherm. Furthermore, XPS, quantum chemical calculation and molecular dynamics simulations were carried out to interpret inhibition mechanism of these inhibitor compounds for steel.

9-Substituted Acridines As Effective Corrosion Inhibitors for Mild Steel: Electrochemical, Surface Morphology, and Computational Studies

Experimental and Theoretical Investigation of 1-Hexyl-3-methylimidazolium Iodide As a Corrosion Inhibitor for Mild Steel in HCl Environment

Halogen-Substituted Acridines As Highly Effective Corrosion Inhibitors for Mild Steel in Acid Medium

Comparison of Synergistic Effect of Counterions on Corrosion Inhibition of Mild Steel in Acid Solution: Electrochemical, Gravimetric and Thermodynamic Studies

Electrochemical and Quantum Chemical Studies of Azoles As Corrosion Inhibitors for Mild Steel in Hydrochloric Acid

Experimental and Theoretical Study on the Inhibition Performances of Quinoxaline and Its Derivatives for the Corrosion of Mild Steel in Hydrochloric Acid

Comparison of the Synergistic Effect of Counterions on the Inhibition of Mild Steel Corrosion in Acid Solution: Electrochemical, Gravimetric and Thermodynamic Studies

Gravimetric, Electrochemical and Surface Studies on the Anticorrosive Properties of 1-(2-pyridyl)-2-thiourea and 2-(Imidazol-2-yl)-pyridine for Mild Steel in Hydrochloric Acid

Novel Triazolyl Bis-Amino Acid Derivatives Readily Synthesized Via Click Chemistry As Potential Corrosion Inhibitors for Mild Steel in Hcl

Nicotinic acid derivatives as corrosion inhibitors for mild steel in hydrochloric acid solutions: an experimental and computational chemistry study

Halogen-substituted Imidazoline Derivatives As Corrosion Inhibitors for Mild Steel in Hydrochloric Acid Solution

Some New Triazole Derivatives As Inhibitors for Mild Steel Corrosion in Acidic Medium

The effect of some triazole derivatives as inhibitors for the corrosion of mild steel in 1 M hydrochloric acid

Experimental and Quantum Chemical Studies on Two Triazole Derivatives As Corrosion Inhibitors for Mild Steel in Acid Media

Quinoxaline Derivatives as Newly Acid Corrosion Inhibitors for Mild Steel: Synthesis, Electrochemical, and Theoretical Investigations

Synthesis, Evaluation and Thermodynamics of A 1H-Benzo-imidazole Phenanthroline Derivative As A Novel Inhibitor for Mild Steel Against Acidic Corrosion

Theoretical Studies of Three Triazole Derivatives As Corrosion Inhibitors for Mild Steel in Acidic Medium

Excellent Corrosion Inhibition Performance of Novel Quinoline Derivatives on Mild Steel in HCl Media: Experimental and Computational Investigations

Synergistic Inhibition Effect of 9-(4-chlorophenyl)-1,2,3,4-tetrahydroacridines and Tween-80 for Mild Steel Corrosion in Acid Medium

Electrochemical and Quantum-Chemical Study on Newly Synthesized Triazoles As Corrosion Inhibitors of Mild Steel in 1 M Hcl

Experimental and Theoretical Investigation of Corrosion Inhibition Effect of Multi-Active Compounds on Mild Steel in 1 M HCl