A diffuse-interface immersed-boundary method for two-dimensional simulation of flows with moving contact lines on curved substrates

LiuHao-Ran,DingHang

IF: 4.645

2015-01-01

Journal of Computational Physics

Abstract:We propose an approach to simulate flows with moving contact lines (MCLs) on curved substrates on a Cartesian mesh. The approach combines an immersed boundary method with a three-component diffuse-...

What problem does this paper attempt to address?

A New Modification of the Immersed‐boundary Method for Simulating Flows with Complex Moving Boundaries

Jian Deng,Xue-Ming Shao,An-Lu Ren

DOI: https://doi.org/10.1002/fld.1237

IF: 1.847

2006-01-01

International Journal for Numerical Methods in Fluids

Abstract:In this paper, a new immersed‐boundary method for simulating flows over complex immersed, moving boundaries is presented. The flow is computed on a fixed Cartesian mesh and the solid boundaries are allowed to move freely through the mesh. The present method is based on a finite‐difference approach on a staggered mesh together with a fractional‐step method. It must be noted that the immersed boundary is generally not coincident with the position of the solution variables on the grid, therefore, an appropriate strategy is needed to construct a relationship between the curved boundary and the grid points nearby. Furthermore, a momentum forcing is added on the body boundaries and also inside the body to satisfy the no‐slip boundary condition. The immersed boundary is represented by a series of interfacial markers, and the markers are also used as Lagrangian forcing points. A linear interpolation is then used to scale the Lagrangian forcing from the interfacial markers to the corresponding grid points nearby. This treatment of the immersed‐boundary is used to simulate several problems, which have been validated with previous experimental results in the open literature, verifying the accuracy of the present method. Copyright © 2006 John Wiley & Sons, Ltd.
A Volume of Fluid Method Algorithm for Simulation of Surface Tension Dominant Two-Phase Flows

Z. H. Gu,H. L. Wen,Yuan Yao,C. H. Yu

DOI: https://doi.org/10.1080/10407790.2019.1642048

2019-01-01

Abstract:In this article, a two-phase flow algorithm that uses an explicit Adams-Bashforth scheme coupled with volume of fluid (VOF) method in a uniform staggered Cartesian grid for surface tension dominant simulation is presented. The interface reconstruction procedure is implemented using the Weighed Linear Interface Calculation (WLIC) algorithm. The level set (LS) function instead of VOF function is adopted for calculation of not only the interface normal vectors in the WLIC algorithm but also the surface tension terms in the Navier-Stokes equations. This VOF method is compared with LS method and other experiment results in the literature for vortex deforming, milk crown, droplet impacting into deep liquid pool and bubble bursting at a free surface problems to show whether mass can be well conserved and breaking and merging phenomena can be accurately simulated.
Improved diffuse interface-immersed boundary method for three-dimensional multiphase fluids–structure interaction with moving contact lines

Haoran Yan,Guiyong Zhang,Dong Wang,Yunpeng Lu,Shuangqiang Wang

DOI: https://doi.org/10.1016/j.apor.2024.104181

IF: 3.761

2024-08-22

Applied Ocean Research

Abstract:In the realm of numerical algorithms for investigating interactions between multiphase fluids and structure, the accurate computation of moving contact lines (MCLs) dynamics and the substantial computational resource demands bring challenges in three-dimensional simulations. In this study, an improved diffuse interface-immersed boundary method is proposed to efficiently investigate three-dimensional multiphase fluids–structure interactions. The present work commences with the development of the explicit correction scheme and the simplified Dirac function coefficient, designed to efficiently implement the immersed boundary technique. To validate the effectiveness and accuracy of the proposed method, the simulations of water entry and exit for a half-buoyant sphere are carried out, which conclusively demonstrate that the proposed method offers significant advantages in terms of both efficiency and accuracy, faithfully capturing the dynamic response of solid structures and the substantial deformation of free surfaces at the three-dimensional scale. Additionally, a comparative analysis of the results obtained using the proposed method for the free water exit of a hollow sphere against previous experimental data is conducted, highlighting the promising potential of the proposed method for applications.

engineering, ocean,oceanography
A simple diffuse interface immersed-boundary scheme for multiphase flows with curved boundaries

Xiao-Dong Niu,Jin-Xiang Zhou,Hong-Wei Xiao,Ya-Ping Wang,Adnan Khan,Mu-Feng Chen,De-Cai Li,Hiroshi Yamaguchi

DOI: https://doi.org/10.1016/j.ijmultiphaseflow.2022.104266

IF: 4.044

2022-12-01

International Journal of Multiphase Flow

Abstract:In this paper, a simple diffuse interface immersed-boundary scheme is developed for multiphase flows with curved boundaries. With this method, the wetting boundary conditions (WBC) for stationary and moving curved boundaries can also be dealt in a similar manner as the flat boundaries. The main idea is cultivated by considering two virtual layers of Lagrangian grid points to interpolate the actual solid curved boundary. This scheme has the advantage of simple implication, it can successfully accommodate both the stationery and complex moving curved boundaries along with good accuracy and mass conservation property. A lattice Boltzmann method (LBM) framework is developed to incorporate the proposed immersed-boundary scheme. To test the present method, several binary and multiphase flow problems are simulated. The numerical results are compared with theoretical and experimental results from literature which showed that the method can easily and efficiently simulate the ternary flows and two-phase flows on the curved surfaces with high accuracy and mass conservation.

mechanics
Lattice Boltzmann simulation of three-phase flows with moving contact lines on curved surfaces

Sheng Li,Yang Lu,Fei Jiang,Haihu Liu

DOI: https://doi.org/10.1103/PhysRevE.104.015310

2021-02-09

Abstract:A numerical method for simulating three-phase flows with moving contact lines on arbitrarily complex surfaces is developed in the framework of lattice Boltzmann method. In this method, the immiscible three-phase flow is modeled through a multiple-relaxation-time color-gradient model, which not only allows for a full range of interfacial tensions but also produces stable outcomes for a wide range of viscosity ratios. A characteristic line model is introduced to implement the wetting boundary condition, which is not only easy to implement but also able to handle arbitrarily complex boundaries with prescribed contact angles. The developed method is first validated by the simulation of a Janus droplet resting on a flat surface, a perfect Janus droplet deposited on a cylinder, and the capillary intrusion of ternary fluids for various viscosity ratios. It is then used to study a compound droplet subject to a uniform incoming flow passing through a multi-pillar structure, where three different values of surface wettability are considered. The simulated results show that the surface wettability has significant impact on the droplet dynamic behavior and final fluid distribution.

Fluid Dynamics
A phase-field-based lattice Boltzmann method for moving contact line problems on curved stationary boundaries in two dimensions

Weifeng Zhao

DOI: https://doi.org/10.1142/S012918311950044X

2019-10-08

International Journal of Modern Physics C

Abstract:In this work, we propose a phase-field-based lattice Boltzmann method to simulate moving contact line (MCL) problems on curved boundaries. The key point of this method is to implement the boundary conditions on curved solid boundaries. Specifically, we use our recently proposed single-node scheme for the no-slip boundary condition and a new scheme is constructed to deal with the wetting boundary conditions (WBCs). In particular, three kinds of WBCs are implemented: two wetting conditions derived from the wall free energy and a characteristic MCL model based on geometry considerations. The method is validated with several MCL problems and numerical results show that the proposed method has utility for all the three WBCs on both straight and curved boundaries.

physics, mathematical,computer science, interdisciplinary applications
An Alternative Method to Implement Contact Angle Boundary Condition and Its Application in Hybrid Lattice-Boltzmann Finite-Difference Simulations of Two-Phase Flows with Immersed Surfaces

Jun-Jie Huang,Jie Wu,Haibo Huang

DOI: https://doi.org/10.1140/epje/i2018-11622-y

2018-01-01

The European Physical Journal E

Abstract:We propose an alternative method to implement the contact angle boundary condition on a solid wall and apply it in hybrid lattice-Boltzmann finite-difference simulations of two-phase flows with immersed surfaces in which the flow equations are solved by the lattice-Boltzmann method and the interface equations are solved by the finite-difference method. Using the hyperbolic tangent profile of the order parameter across an interface in phase-field theory, we were able to obtain its unknown value at a ghost point from the information at only one point in the fluid domain. This is in contrast with existing approaches relying on interpolations involving several points. The special feature allows it to be more easily implemented on immersed surfaces cutting through the grid lines. It was properly incorporated into the framework of the hybrid lattice-Boltzmann finite-difference simulation, and applied successfully for several problems with different levels of complexity. First, the equilibrium shapes of a droplet on a sphere with different contact angles and radii were studied under cylindrical geometry and a good agreement with theoretical predictions was found. Preliminary studies on a three-dimensional droplet spreading on a sphere were also performed and the results agreed well with the corresponding axisymmetric results. Second, the spreading of a two-dimensional drop on an embedded inclined wall with a given contact angle was investigated and the results matched those on a flat wall at the domain boundary under the same condition. Third, capillary filling in a cylindrical tube was studied and the speed of the interface in the tube was found to follow Washburn's law. Fourth, a droplet impacting on a sphere was investigated and several different outcomes were captured depending on the Reynolds number, the viscosity ratio, and the wettability and radius of the sphere. Finally, the proposed method was shown to be capable of studying even more complicated problems involving the interaction between a droplet and multiple objects of different sizes and contact angles.
A Three-Dimensional Fictitious Domain Method for the Simulation of Fluid-Structure Interactions

Zhao-sheng Yu,Xue-ming Shao

DOI: https://doi.org/10.1016/s1001-6058(09)60190-6

2010-01-01

Journal of Hydrodynamics

Abstract:The Distributed-Lagrange-Multiplier based Fictitious Domain (DLM/FD) method previously proposed by Yu [J. Comput. Phys. 207 (2005), 1–27] for the simulation of fluid/flexible-body interaction problems is extended from the 2D to the 3D case in this study. We first demonstrate that the Lagrange multiplier problem can be more efficiently solved with a direct-forcing scheme instead of the original Uzawa iterations without the sacrifice of the accuracy. The type of the interpolation function (i.e. smoothed delta function) for the transfer of the quantities between the Eulerian and Lagragian frames is shown not to affect the results significantly. Secondly, the fictitious domain method is implemented in the three-dimensional case. The new 3D codes are applied to the flapping of a 3D flexible plate in a uniform flow, and the deformation of tri-leaflets at opening stage.
Self-similar diffuse boundary method for phase boundary driven flow

Emma M. Schmidt,J. Matt Quinlan,Brandon Runnels

DOI: https://doi.org/10.1063/5.0107739

IF: 4.6

2022-11-03

Physics of Fluids

Abstract:Interactions between an evolving solid and inviscid flow can result in substantial computational complexity, particularly in circumstances involving varied boundary conditions between the solid and fluid phases. Examples of such interactions include melting, sublimation, and deflagration, all of which exhibit bidirectional coupling, mass/heat transfer, and topological change of the solid–fluid interface. The diffuse interface method is a powerful technique that has been used to describe a wide range of solid-phase interface-driven phenomena. The implicit treatment of the interface eliminates the need for cumbersome interface tracking, and advances in adaptive mesh refinement have provided a way to sufficiently resolve diffuse interfaces without excessive computational cost. However, the general scale-invariant coupling of these techniques to flow solvers has been relatively unexplored. In this work, a robust method is presented for treating diffuse solid–fluid interfaces with arbitrary boundary conditions. Source terms defined over the diffuse region mimic boundary conditions at the solid–fluid interface, and it is demonstrated that the diffuse length scale has no adverse effects. To show the efficacy of the method, a one-dimensional implementation is introduced and tested for three types of boundaries: mass flux through the boundary, a moving boundary, and passive interaction of the boundary with an incident acoustic wave. Two-dimensional results are presented as well these demonstrate expected behavior in all cases. Convergence analysis is also performed and compared against the sharp-interface solution, and linear convergence is observed. This method lays the groundwork for the extension to viscous flow and the solution of problems involving time-varying mass-flux boundaries.

mechanics,physics, fluids & plasmas
Diffuse-Interface Blended Method for Imposing Physical Boundaries in Two-Fluid Flows

Tanyakarn Treeratanaphitak,Nasser Mohieddin Abukhdeir

DOI: https://doi.org/10.1021/acsomega.3c00838

IF: 4.1

2023-04-19

ACS Omega

Abstract:Multiphase flows are commonly found in chemical engineering processes such as distillation columns, bubble columns, fluidized beds and heat exchangers. The physical boundaries of domains in numerical simulations of multiphase flows are generally defined by a conformal unstructured mesh which, depending on the complexity of the physical system, results in time-consuming mesh generation which frequently requires user-intervention. Furthermore, the resulting conformal unstructured mesh could potentially contain a large number of skewed elements, which is undesirable for numerical stability and accuracy. The diffuse-interface approach allows for the use of a simple structured meshes to be used while still capturing the desired physical (e.g., solid-fluid) boundaries. In this work, a novel diffuse-interface method for the imposition of physical boundaries is developed for the incompressible two-fluid multiphase flow model. This model is appropriate for dispersed multiphase flows which are pervasive in chemical engineering processes, in that this flow regime results in high levels of mass and energy transfer between phases. A diffuse interface is used to define the physical boundaries and boundary conditions are imposed by blending the conservation equations from the two-fluid model with that of the nondeformable solid. The results from the diffuse-interface method are compared with results from a conformal unstructured mesh for different interface functions and widths. For small interface widths, the accuracy of the flow profile is unaffected by the choice of interface function and the phase fraction distribution and flow behavior are within 3% compared to those from a conformal mesh. As the interface width increases, the diffuse-interface solution deviates from the conformal mesh solution in both the localized gas fraction and the overall gas hold-up, resulting in a difference up to 30%. In the case of flow past a cylinder, where the solid interacts with the flow, the presence of the diffuse interface extends the thickness of the solid boundary and results in a deviation from the conformal mesh solution as time increases.
An Energy-stable Finite Element Method for the Simulation of Moving Contact Lines in Two-phase Flows

Quan Zhao,Weiqing Ren

DOI: https://doi.org/10.1016/j.jcp.2020.109582

2020-02-27

Abstract:We consider the dynamics of two-phase fluids, in particular the moving contact line, on a solid substrate. The dynamics are governed by the sharp-interface model consisting of the incompressible Navier-Stokes\slash Stokes equations with the classical interface conditions, the Navier boundary condition for the slip velocity along the wall and a contact line condition which relates the dynamic contact angle of the interface to the contact line velocity. We propose an efficient numerical method for the model. The method combines a finite element method for the Navier-Stokes/Stokes equations on a moving mesh with a parametric finite element method for the dynamics of the fluid interface. The contact line condition is formulated as a time-dependent Robin-type of boundary condition for the interface so it is naturally imposed in the weak form of the contact line model. For the Navier-Stokes equations, the numerical scheme obeys a similar energy law as in the continuum model but up to an error due to the interpolation of numerical solutions on the moving mesh. In contrast, for Stokes flows, the interpolation is not needed so we can prove the global unconditional stability of the numerical method in terms of the energy. Numerical examples are presented to demonstrate the convergence and accuracy of the numerical methods.

Computational Physics
An Alternative Method to Implement Contact Angle Boundary Condition on Immersed Surfaces for Phase-Field Simulations

Jun-Jie Huang,Jie Wu

DOI: https://doi.org/10.48550/arXiv.1610.07124

2016-10-23

Abstract:In this paper, we propose an alternative approach to implement the contact angle boundary condition on immersed surfaces for phase-field simulations of two-phase flows using the Cahn-Hilliard equation on a Cartesian mesh. This simple and effective method was inspired by previous works on the geometric formulation of the wetting boundary condition. In two dimensions, by making full use of the hyperbolic tangent profile of the order parameter, we were able to obtain its unknown value at a ghost point from the information at only one point in the fluid. This is in contrast with previous approaches using interpolations involving several points. The special feature allows this method to be easily implemented on immersed surfaces (including curved ones) that cut through the grid lines. It is verified through the study of two examples: (1) the shape of a drop on a circular cylinder with different contact angles; (2) the spreading of a drop on an embedded inclined wall with a given contact angle.

Computational Physics,Fluid Dynamics
Finite element methods for a class of continuum models for immiscible flows with moving contact lines

A. Reusken,X. Xu,L. Zhang

DOI: https://doi.org/10.48550/arXiv.1510.03160

2015-10-12

Abstract:In this paper we present a finite element method (FEM) for two-phase incompressible flows with moving contact lines. We use a sharp interface Navier-Stokes model for the bulk phase fluid dynamics. Surface tension forces, including Marangoni forces and viscous interfacial effects, are modeled. For describing the moving contact we consider a class of continuum models which contains several special cases known from the literature. For the whole model, describing bulk fluid dynamics, surface tension forces and contact line forces, we derive a variational formulation and a corresponding energy estimate. For handling the evolving interface numerically the level-set technique is applied. The discontinuous pressure is accurately approximated by using a stabilized extended finite element space (XFEM). We apply a Nitsche technique to weakly impose the Navier slip conditions on the solid wall. A unified approach for discretization of the (different types of) surface tension forces and contact line forces is introduced. The numerical methods are first validated for relatively simple test problems, namely a stationary spherical droplet in contact with a flat wall and a spherical droplet on a flat wall that spreads or contracts to a stationary form. A further validation is done for a two-phase Couette flow with contact lines. To illustrate the robustness of our FEM we also present results of simulations for a problem with a curved contact wall and for a problem with more complicated contact line dynamics.

Fluid Dynamics,Numerical Analysis,Computational Physics
A mass-preserving level set method for simulating 2D/3D fluid flows with deformed interface

Hao-Liang Wen,Ching-Hao Yu,Tony Wen-Hann Sheu,Shiu-Wu Chau

DOI: https://doi.org/10.1016/j.oceaneng.2023.115063

IF: 5

2023-06-17

Ocean Engineering

Abstract:This research paper focuses on the development of a novel interface-capturing solver for predicting two-phase flow in 2D/3D Cartesian meshes within the framework of Eulerian approaches. The primary objective is to ensure mass conservation and accurate capture of interface topology. To achieve this, a mass-preserving level set advection equation formulated as a scalar sign-distance function is proposed. The key innovation of the Eulerian solver lies in the incorporation of a scalar speed function for robust reconstruction of the classical level set equation. The effectiveness and reliability of the proposed flow solver in solving incompressible two-phase viscous flow equations are demonstrated through several benchmark problems.

engineering, civil, ocean, marine,oceanography
Simulating liquid–gas interfaces and moving contact lines with the immersed boundary method

Michael Y. Li,Daniel Chin,Charles Puelz,Pejman Sanaei

DOI: https://doi.org/10.1063/5.0086452

IF: 4.6

2022-05-28

Physics of Fluids

Abstract:Physics of Fluids, Volume 34, Issue 5, May 2022. In this work, we use the immersed boundary method with four extensions to simulate a moving liquid–gas interface on a solid surface. We first define a moving contact line model and implements a static-dynamic friction condition at the immersed solid boundary. The dynamic contact angle is endogenous instead of prescribed, and the solid boundary can be non-stationary with respect to time. Second, we simulate both a surface tension force and a Young's force with one general equation that does not involve estimating local curvature. In the third extension, we splice liquid–gas interfaces to handle topological changes, such as the coalescence and separation of liquid droplets or gas bubbles. Finally, we re-sample liquid–gas interface markers to ensure a near-uniform distribution without exerting artificial forces. We demonstrate empirical convergence of our methods on non-trivial examples and apply them to several benchmark cases, including a slipping droplet on a wall and a rising bubble.

mechanics,physics, fluids & plasmas
A diffuse-interface method for simulating two-phase flows of complex fluids

PENGTAO YUE,JAMES J. FENG,CHUN LIU,JIE SHEN

DOI: https://doi.org/10.1017/s0022112004000370

IF: 3.7

2004-09-25

Journal of Fluid Mechanics

Abstract:Two-phase systems of microstructured complex fluids are an important class of engineering materials. Their flow behaviour is interesting because of the coupling among three disparate length scales: molecular or supra-molecular conformation inside each component, mesoscopic interfacial morphology and macroscopic hydrodynamics. In this paper, we propose a diffuse-interface approach to simulating the flow of such materials. The diffuse-interface model circumvents certain numerical difficulties in tracking the interface in the classical sharp-interface description. More importantly, our energy-based variational formalism makes it possible to incorporate complex rheology easily, as long as it is due to the evolution of a microstructure describable by a free energy. Thus, complex rheology and interfacial dynamics are treated in a unified framework. An additional advantage of our model is that the energy law of the system guarantees the existence of a solution. We will outline the general approach for any two-phase complex fluids, and then present, as an example, a detailed formulation for an emulsion of nematic drops in a Newtonian matrix. Using spectral discretizations, we compute shear-induced deformation, head-on collision and coalescence of drops where the matrix and drop phases are Newtonian or viscoelastic Oldroyd-B fluids. Numerical results are compared with previous studies as a validation of the theoretical model and numerical code. Finally, we simulate the retraction of an extended nematic drop in a Newtonian matrix as a method for measuring interfacial tension.

mechanics,physics, fluids & plasmas
A fully 3D simulation of fluid-structure interaction with dynamic wetting and contact angle hysteresis

Hai-Long Li,Hao-Ran Liu,Hang Ding

DOI: https://doi.org/10.1016/j.jcp.2020.109709

IF: 4.645

2020-11-01

Journal of Computational Physics

Abstract:<p>In this paper, we propose a three-dimensional diffuse-interface immersed-boundary (3D DIIB) method for the simulations of fluid-structure interaction (FSI) with dynamic wetting, complex geometry and contact angle hysteresis. In particular, the movement of rigid solid objects is allowed to have six degrees of freedom. In the method, the complex solid boundaries are represented by a set of Lagrangian patches that cover the whole surface of the solid objects, while the flows are solved on a staggered Cartesian grid. The coupling between the object movement and surrounding fluid flows are performed using an immersed boundary method. A simple model of contact angle hysteresis is used to ensure pinned contact lines if local contact angle is within the window of contact angle hysteresis. To relieve the stress singularity at moving contact lines, a characteristic moving contact line model <a class="workspace-trigger" href="#br0010">[1]</a> is adopted at 3D curved solid surfaces, after the geometrical information of interface is constructed in the vicinity of the contact line. For 3D simulations of FSI with dynamic wetting, it is crucial but difficult to estimate capillary force, of which the process consists of locating the moving contact line on complex solid surfaces, discretizing it into line segment, and determining the local tangent to the interface at the contact lines. Special consideration is given to the modeling of the capillary force and associated torque, in order to have accurate approximations. The performance of the 3D DIIB method is systematically examined through a series of numerical experiments, of which the results are either verified against theoretical predictions or compared with experimental data. Finally, we simulate the collision process of raindrops with 3D mosquito body, to show the potential of the 3D DIIB method in practical applications.</p>

physics, mathematical,computer science, interdisciplinary applications
A cut-cell method for the numerical simulation of 3D multiphase flows with strong interfacial effects

Alexandre Caboussat,Julien Hess,Alexandre Masserey,Marco Picasso

DOI: https://doi.org/10.1016/j.jcp.2024.112846

IF: 4.645

2024-05-01

Journal of Computational Physics

Abstract:We present a numerical model for the approximation of multiphase flows with free surfaces and strong interfacial effects. The model relies on the multiphase incompressible Navier-Stokes equations, and includes surface tension effects on the interfaces between phases, and contact angles. The volume-of-fluid approach is used to track the interfaces and the free surfaces between the various phases and the ambient air. The numerical method relies on an operator splitting strategy. The space discretization relies on a two-grid approach that uses an unstructured finite element mesh for diffusion phenomena and a structured Cartesian grid for advection phenomena. An adaptive mesh refinement algorithm is incorporated to better track the interfaces and free surfaces on the finite element mesh, and approximate more accurately surface forces. The model is validated through numerical experiments, in particular for emulsion problems.

physics, mathematical,computer science, interdisciplinary applications
A Hybrid Scheme of Level Set and Diffuse Interface Methods for Simulating Multi-Phase Compressible Flows

Meiyan Fu,Tiao Lu

DOI: https://doi.org/10.4208/nmtma.oa-2021-0162

2022-01-01

Numerical Mathematics Theory Methods and Applications

Abstract:We propose a hybrid scheme combing the level set method and the multicomponent diffuse interface method to simulate complex multi-phase flows. The overall numerical scheme is based on a sharp interface framework where the level set method is adopted to capture the material interface, the Euler equation is used to describe a single-phase flow on one side of the interface and the six-equation diffuse interface model is applied to model the multi-phase mixture or gas-liquid cavitation on the other side. An exact Riemann solver, between the Euler equation nd the six-equation model with highly nonlinear Mie-Gruneisen equations of state, is developed to predict the interfacial states and compute the phase interface flux. Several numerical examples, including shock tube problems, cavitation problems, air blast and underwater explosion applications are presented to validate the numerical scheme and the Riemann solver.

A diffuse-interface immersed-boundary method for two-dimensional simulation of flows with moving contact lines on curved substrates

A New Modification of the Immersed‐boundary Method for Simulating Flows with Complex Moving Boundaries

A Volume of Fluid Method Algorithm for Simulation of Surface Tension Dominant Two-Phase Flows

Improved diffuse interface-immersed boundary method for three-dimensional multiphase fluids–structure interaction with moving contact lines

A simple diffuse interface immersed-boundary scheme for multiphase flows with curved boundaries

Lattice Boltzmann simulation of three-phase flows with moving contact lines on curved surfaces

A phase-field-based lattice Boltzmann method for moving contact line problems on curved stationary boundaries in two dimensions

An Alternative Method to Implement Contact Angle Boundary Condition and Its Application in Hybrid Lattice-Boltzmann Finite-Difference Simulations of Two-Phase Flows with Immersed Surfaces

A Three-Dimensional Fictitious Domain Method for the Simulation of Fluid-Structure Interactions

Self-similar diffuse boundary method for phase boundary driven flow

Diffuse-Interface Blended Method for Imposing Physical Boundaries in Two-Fluid Flows

An Energy-stable Finite Element Method for the Simulation of Moving Contact Lines in Two-phase Flows

An Alternative Method to Implement Contact Angle Boundary Condition on Immersed Surfaces for Phase-Field Simulations

Finite element methods for a class of continuum models for immiscible flows with moving contact lines

A mass-preserving level set method for simulating 2D/3D fluid flows with deformed interface

Simulating liquid–gas interfaces and moving contact lines with the immersed boundary method

A diffuse-interface method for simulating two-phase flows of complex fluids

A fully 3D simulation of fluid-structure interaction with dynamic wetting and contact angle hysteresis

A cut-cell method for the numerical simulation of 3D multiphase flows with strong interfacial effects

A Hybrid Scheme of Level Set and Diffuse Interface Methods for Simulating Multi-Phase Compressible Flows