Load-carrying Mechanism of Truss-Confined Buckling-Restrained Braces: Numerical and Theoretical Analyses

Meng-Zheng Wang,Yan-Lin Guo,Peng Zhou

DOI: https://doi.org/10.1016/j.engstruct.2020.110500

2020-01-01

Abstract:Truss-confined buckling-restrained braces (TC-BRBs) are composed of conventional double steel tube BRBs and additional installation of external truss-confining systems. The truss-confining systems make TC-BRBs fulfil the need of the long-span bracing and enable economic and rational design. The previous experimental and numerical investigation of TC-BRBs suggested that the lower limit of the restraining ratio to ensure a stable cyclic behaviour was an empirical value of 3.0 for preliminary and conservative design. This paper aims to propose more rigorous design formulas for estimating the lower limit of the restraining ratio based on the numerical and theoretical analyses of typical TC-BRBs, triple- and quadruple-TC-BRBs (TTC- and QTC-BRBs). First, the formulas of the elastic buckling load of TC-BRBs are derived. Then, the load-carrying behaviour of TC-BRBs with the initial geometric imperfection is investigated with consideration of the most disadvantageous bending direction. The internal force variation of the external restraining members is discussed with increasing the restraining ratio, and it is found that the failure of TC-BRBs is governed by the compressive chord at the mid span. Furthermore, according to the criterion that the external restraining members do not fail before the core reaches the required axial displacement, the rigorous formulas for predicting the lower limit of the restraining ratio are derived. The formulas assure more rational and economic design of the load-carrying capacity of TC-BRBs.