Abstract:Parameter values adopted in railway engineering analysis at present are generally obtained through triaxial tests, whereas the remarkable difference between the actual stress path during train passage and the loading path in cyclic triaxial tests may lead to inaccurate predictions and even engineering problems. Published researches show that the actual stress path probably contains principal stress rotation(PSR), which has a sisgnificant influence on the mechanical response of soil. However, the conventional approach, i.e. cyclic triaxial test is not efficient in simulating this complicated stress path involving PSR. Instead, hollow cylinder test with cyclic shear stress has been proved to be an excellent selection for PSR study. In order to obtain reliable stress path for guiding hollow cylinder tests, three-dimensional calculation for a certain urban railway is carried out; and the distribution regularity of cyclic stress amplitudes, cycle numbers and PSR under train loads is analyzed. Furthermore, a series of cyclic torsional shear tests on hollow cylinder samples is employed to simulate the complex stress path and to research the deformation and pore pressure accumulation properties of saturated soft clay. Considering stress in foundation soil decreasing along with the depth increasing, various cyclic stress amplitudes corresponding to different depths are adopted in this experiment study. Three-dimensional calculation shows that the major principal stress axis will rotate from -90 degrees to 90 degrees during the train loading passage as well as the number and amplitude of stress waves reduce gradually with the increase of depth. It is also shown that both PSR and stress are quite sensitive to train loads as the upper soil element can identify a single wheel load while the lower soil element can just identify a bogie and even the whole train load. And through the cyclic torsional shear tests, it's obvious that the rotation of principal stress can promote the accumulation of pore pressure and strain in soft soil foundations significantly; and in the case when vertical cyclic stress amplitude equals to 15 kPa, the pore pressure and strain in cyclic torsional shear test are 77% and nearly 50% higher than that in cyclic triaxial test respectively. What's more, as the cyclic stress amplitude increases, the gap of cumulative pore pressure and strain between that two types of tests will enlarge further, which may even result in essential difference that samples in triaxial tests show only small strain whereas failure in torsional shear tests.

Deformation of granular soil under combination of principal stress value and direction change

Novel Undrained Servomechanism in Discrete-Element Modeling and Its Application in Multidirectional Cyclic Shearing Simulations

Undrained Cyclic Behavior of Granular Materials Considering Initial Static Shear Effect: Insights from Discrete Element Modeling

Response of Granular Material under Combined Principal Stress Value and Orientation Change in 3D Space

Discrete Element Simulations of Drained Granular Material Response under Multidirectional Rotational Shear

Numerical Simulations of Granular Material Behavior under Rotation of Principal Stresses: Micromechanical Observation and Energy Consideration

3D Multiscale Modeling of Strain Localization in Granular Media

Incremental behavior of granular soils: a strain response envelope perspective

DEM numerical test method for granular matter under complex 3D loading

Deformation of Granular Material under Continuous Rotation of Stress Principal Axes

Stiffness Degradation and Plastic Strain Accumulation of Clay under Cyclic Load with Principal Stress Rotation and Deviatoric Stress Variation

Numerical Study on the Shear Strength of Granular Materials under the Low Confining Pressure

Deformation Characteristics of Saturated Clay in Three-Dimensional Cyclic Stress State

Experimental Study of Drained Anisotropy of Granular Soils Involving Rotation of Principal Stress Direction

Effect of static shear stress and cyclic loading direction on cyclic behaviors of granular soils by DEM analysis

Intact soft clay’s critical response to dynamic stress paths on different combinations of principal stress orientation

Deformation behaviors of sandy subgrade soil under traffic load-induced stress path

On the Influence of Inter-Particle Friction and Dilatancy in Granular Materials: a Numerical Analysis

Research on mechanical response of soft clay under cyclic loading involving principal stress rotation

Effects of principal stress rotation and cyclic confining pressure on behavior of soft clay with different frequencies

Deformation Behavior of Coarse-Grained Soil as an Embankment Filler under Cyclic Loading