Abstract:Development of Li metal batteries (LMBs) has attracted worldwide attention in recent years due to their much higher theoretical energy densities than those of conventional Li ion batteries. LMBs with high energy density and long cycle life have been demonstrated by several institutions and companies recently. 1,2 LMBs may be safe in their early stage of cycling due to the small geometric surface area of Li metal anode. However, after long term cycling, mossy/dendritic/"dead Li" will form eventually. They will not only lead to the increase of cell thickness, but also lead to powdered Li which pose a safety concern when exposed to air in the extreme case of mechanical damage, especially for their large scale applications. 3 Thus, a paradigm change in the electrolyte design is required to minimize the formation of "dead Li" and improve the thermal stability of the batteries. In this work, several approaches have been used to improve the thermal stability of LMBs. (1) Use of electrolyte with high coulombic efficiency to minimize the formation of "dead Li" or mossy Li; (2) use of non-flammable solvent in electrolyte; (3) use of solvent with high boiling point and high flash point. (4) use of electrolyte enabling formation of large size of Li deposition with minimal surface area. This will enable the formation of a lithiophobic SEI layer which can accommodate stress/strain during large volume changes. (5) Screening additives to improve Li CE and safety. The electrolytes with improved safety/stability at extreme conditions will also be reported in this work. 1 Niu, C. et al. Balancing interfacial reactions to achieve long cycle life in high-energy lithium metal batteries. Nature Energy, (2021). 2 Hu, Q. Li-metal batteries, https://s29.q4cdn.com/695431818/files/doc_presentation/2022/03/March-2022-Investor-Presentation.pdf (2022). 3 Louli, A. J. et al. Diagnosing and correcting anode-free cell failure via electrolyte and morphological analysis. Nature Energy 5, 693-702, (2020).

LiI-KI and LAGP Electrolytes with a Bismuth-Tin Positive Electrode for the Development of a Liquid Lithium Battery

Electrochemical performance and application prospect analysis of Li||Sb-Bi-Sn liquid metal batteries

Development of Li Metal Batteries with Improved Safety

Lithium Transport and Intermetallic Generation in Li–Bi Liquid Metal Batteries

Versatile Inorganic/Polymer Composite Electrolyte Added with 2-Methylsuccinic Anhydride via a Solvent-Free Preparation Method for High-Performance All-Solid-State Li-Metal Batteries: High Voltage, Long Cycle Life, and Room-Temperature Operation

Liquid Bi-Sb-Sn Electrodes with Synergistic Stabilization Mechanism for Long-Lifespan Sodium-Based Liquid Metal Batteries

An elaborate low-temperature electrolyte design towards high-performance liquid metal battery

In-situ Polymerization with Dual-Function Electrolyte Additive Toward Future Lithium Metal Batteries

Capacity extended bismuth-antimony cathode for high-performance liquid metal battery

A Semisolvated Sole-Solvent Electrolyte for High-Voltage Lithium Metal Batteries.

Stable High‐Temperature Lithium‐Metal Batteries Enabled by Strong Multiple Ion–Dipole Interactions

High-Safety All-Solid-State Lithium-Metal Battery with High-Ionic-Conductivity Thermoresponsive Solid Polymer Electrolyte

Strongly Solvating Triglyme-based Electrolyte Realizes Stable Lithium Metal Batteries at High-Voltage and High-Temperature

In-situ Polymerized Electrolyte from a Bifunctional Additive for Li+ Bulk Phase Migration and High-Flux Interface Transport in Lithium Metal Batteries

A Na-Li dual cation liquid metal battery with high electrode utilization and high cycling stability

Wide-temperature Rechargeable Li Metal Batteries Enabled by an In-Situ Fabricated Composite Gel Electrolyte with a Hierarchical Structure

High Voltage Stable Li Metal Batteries Enabled by Ether-Based Highly Concentrated Electrolytes at Elevated Temperatures

Bidirectional Interphase Modulation of Phosphate Electrolyte Enables Intrinsic Safety and Superior Stability for High-Voltage Lithium-Metal Batteries.

In Situ construction of PVDF/LLTO electrolyte with stable electrolyte/electrode interphase for integrated solid-state lithium batteries

Stable Low-Temperature Lithium Metal Batteries with Dendrite-Free Ability Enabled by Electrolytes with Cooperative Li+-Solvation

Deciphering Interphase Instability of Lithium Metal Batteries with Localized High-Concentration Electrolytes at Elevated Temperatures