Abstract:For a gas bubble rising in quiescent liquid, most previous drag force models correlate the drag coefficient Cd to dimensionless parameters such as the Reynolds number Re, the Eötvös number Eo, and the Morton number Mo. However, it is still an open question if the current models can be applied to non-buoyancy-driven bubbles in a wide range of parameters. In the present study, we investigate the effects of Reynolds number Re and Weber number We on the drag force coefficient Cd of bubbly flows. To obtain a converged drag force, a dynamic body force model is developed, which constraints the bubble at a fixed position. A large number of numerical simulations are carried out, spanning in the (We, Re) parametric space. The correlations of Cd to We and Re are studied, respectively. We find that for low We, as the bubble keeps spherical, its drag coefficients can be well predicted by the previous spherical bubble models. For medium–high We, when Re is low, the viscous force contributes most, and therefore, the bubble deformation or We plays an insignificant role on the drag. In contrast, when Re is high, the pressure force or shape drag becomes dominant, which is strongly dependent of We. Therefore, we can identify three different regions, spherical, We-dependent, and We-independent, in the parametric space. Finally, a new empirical drag force model for a non-buoyancy-driven bubble is proposed based on the Cd-Re and Cd-We correlations obtained by our numerical simulations. The current model is superior to the previous drag models, with predicting errors within 20%, by compared to the direct numerical simulation and experimental data. More profoundly, the current model can apply to a wider range of parameters, that is, <math> 1 ≤ R e ≤ 1000</math> and <math> 0 ≤ W e ≤ 20</math>, particularly for high We, when the bubble deformation cannot be neglected.

Analyses and Modified Models for Bubble Shape and Drag Coefficient Covering a Wide Range of Working Conditions

Bubble Shape and Rising Velocity in Viscous Liquids at High Temperature and Pressure

CFD Simulation for Up Flow Jet-Loop Reactors by Use of Bi-Dispersed Bubble Model

Experiment and Numerical Simulation of the Motion of Bubble Swarm in a Bubble Column

A numerical study on the drag law of a gas bubble using dynamic body force method

Experimental And Numerical Study Of Bubble Drag Reduction On A Flat Plate

The Influence of Thixotropy on Bubble Growth in Thixotropic Yield Stress Fluids: Insights from Numerical Simulations

Numerical Modelling of Bubbling Flow Dynamic Behaviour in a Bubble Column

Numerical Study on the Deformation of a Gas Bubble in Uniform Flow

Stream-Wise Distribution of Skin-Friction Drag Reduction on A Flat Plate with Bubble Injection

Correlation of Drag Coefficient Between Rising Bubbles in Chain

Numerical Investigation of Microbubble Drag Reduction on an Axisymmetric Body Based on Eulerian Multiphase Model

Drag Force of Bubble Swarms and Numerical Simulations of a Bubble Column with a CFD-PBM Coupled Model

Novel Models for Predicting the Shape and Motion of an Ascending Bubble in Newtonian Liquids Using Machine Learning

Numerical investigation on the drag force of a single bubble and bubble swarm

Direct numerical simulation of deformable rising bubbles at low Reynolds numbers

An Improved Computational Fluid Dynamics-Discrete Bubble Model for Multiphase Bubble Flow Simulation with a Wide Grid/bubble Size Ratio

Modeling of Dual‐Factor Drag Correction Model for Bubbly Flow under Elevated Pressure

A Modified Model for Bubble Growth Rate and Bubble Departure Diameter in Nucleate Pool Boiling Covering a Wide Range of Pressures

Experimental research and model development on interfacial drag in rectangle channel bubbly and slug flow

The Modeling of Bubble Lift-Off Diameter in Vertical Subcooled Boiling Flow