Topology optimization of fluid channels for thermal management of hydrogen storage and release processes in metal hydrides reactors

Hao Ye,Yubing Tao,Hao Chang,Zihan Liu,Qing Huang,Qingqing Deng

DOI: https://doi.org/10.1016/j.ijhydene.2024.02.062

IF: 7.2

2024-02-25

International Journal of Hydrogen Energy

Abstract:The low thermal conductivity of hydrogen storage materials significantly limits the reaction rate of hydrogen storage and release in metal hydrides reactors. In present paper, a heat transfer fluid channel was designed by topology optimization method to enhance the heat transfer performance and increase the hydrogen storage and release rates. Firstly, a series of channel structures were obtained through two-dimensional topology optimization, then they were embedded into metal hydride reaction beds by three-dimensional reconstruction. The hydrogen storage and release performance of different reaction beds were analyzed, the most effective bed structure was derived and compared with the finned bed. The results show that the hydrogen storage and release time of the designed fluid channel reaction bed is 31.5% and 24.4% less than the finned bed. Lastly, the hydrogen storage and release performance of the designed reaction bed under different operating conditions were examined. The appropriate operation conditions were derived: for hydrogen storage, hydrogen pressure of 1.0 MPa, HTF inlet velocity of 0.25 m s −1 and inlet temperature of 293 K; for hydrogen release, hydrogen pressure of 0.1 MPa, HTF inlet velocity of 0.25 m s −1 and inlet temperature of 363 K. Moreover, the reaction bed designed by topology optimization has obvious advantages and shows better hydrogen storage and release performance compared to finned reactors under various operating conditions.

energy & fuels,electrochemistry,chemistry, physical