Abstract:In the conventional wet slurry method for making lithium-ion battery (LIB) electrodes, unwanted N-Methyl-2-Pyrrolidone (NMP) solvent is used. The use of NMP increases the overall energy demand during electrode coating since NMP needs to be dried from the coated slurry and recovered. The improper use of NMP can also impose detrimental effects on health and the environment. Thus, solvent-free dry processes are gaining increased interest worldwide for electrode fabrication. Amongst different dry electrode manufacturing techniques, electrostatic spray deposition (ESD) is one of the most promising techniques. In this study, positive LiNi0.8Co0.1Mn0.1O2 (NMC811) electrodes were manufactured by the ESD process and wet slurry process. The differences between the electrodes made by these two processes were investigated by the peel strength test, electrochemical techniques (e.g., rate tests, electrochemical impedance spectroscopy, and constant voltage/constant current cycling), scanning electron microscopy with energy dispersive x-ray spectroscopy, and X-ray photoelectron spectroscopy. In the dry electrodes, most active material particles were densely covered by the binder and conductive agents. Whereas in wet slurry electrodes, binder and conductive agents were distributed more homogenously both on the active material surfaces and between the active material particles. The uniform distribution of the binder and conductive agents in the slurry electrodes results in a robust conductive network, leading to better performance at high C- rates (e.g., 2-5C). Interestingly, the dry electrodes had comparable performance to slurry electrodes at the initial stages of electrochemical testing with low current rates. Hence, it can be concluded that the distribution of the electrode materials affects active material usage and the conductive paths, and a homogenous distribution is needed to achieve faster discharge capacity at higher C rates. Future work will focus on the long-term cycling performance of the electrodes to further understand the degradation mechanisms and differences between the two types of electrodes.

Coarse-grained molecular dynamics simulations of microstructure evolution and debonding in water-based cathode electrode drying

Mechanical and Electrochemical Implications of Drying Temperature on Lithium‐Ion Battery Electrodes

Unraveling the Mechanism of Non-Uniform Lithium Deposition in Liquid Electrolytes

The Electrochemical Performance Deterioration Mechanism of LiNi0.83Mn0.05Co0.12O2 in Aqueous Slurry and a Mitigation Strategy

Modeling and Optimizing the Drying Process of Electrode Manufacturing for Lithium‐Ion Batteries

A Computational Fluid Dynamics–Discrete Element Method Model for Physics‐Based Simulation of Structure Formation during Battery Electrode Drying

Investigating the Structure and Performance Differences between the Electrodes Made by a Dry and a Wet Slurry Processes

Microstructure formation of lithium-ion battery electrodes during drying – An ex-situ study using cryogenic broad ion beam slope-cutting and scanning electron microscopy (Cryo-BIB-SEM)

Probing Charge Transport and Microstructural Attributes in Solvent‐ versus Water‐Based Electrodes with a Spotlight on Li–S Battery Cathode

2D Discrete Element Simulation of Electrode Structural Evolutions in Li‐Ion Battery During Drying and Calendering

Modeling and Analysis of the Drying Process of Lithium-Ion Battery Electrodes Based on Non-Steady-State Drying Kinetics

Binder migration during drying of lithium-ion battery electrodes: modelling and comparison to experiment

Pore-scale modeling and investigation on the effect of calendering on lithium-ion battery cathodes

Understanding the Effects of the Mixing Processes on the Performance of NMC-LMO Blend Electrodes Made by a Dry Electrostatic Spray Deposition Process

Simulation of Micro/Nanopowder Mixing Characteristics for Dry Spray Additive Manufacturing of Li-Ion Battery Electrodes

Rheological Studies of LiNi0.6Mn0.2Co0.2O2-Based Slurry for the Development of Energy Dense Li-Ion Applications

The effect of drying methods on the structure and performance of LiNi0.5Co0.2Mn0.3O2 cathode material for lithium-ion batteries

Investigating the Structure and Performance of Electrodes Made by Dry and Wet Slurry Processes

Origin of performance degradation in high-delithiation LixCoO2: insights from direct atomic simulations using global neural network potentials

Probing Particle-Carbon/Binder Degradation Behavior in Fatigued Layered Cathode Materials through Machine Learning Aided Diffraction Tomography

Multiscale computational fluid dynamics modelling of spatial ALD on porous li-ion battery electrodes