Abstract:Electrochemical energy storage devices, like supercapacitors and batteries, are needed to meet the constantly increasing demands of portable energy devices. Many types of supercapacitor electrodes were synthesized and reported which include carbon-based materials, polymers, oxides and perovskites. In this work, we report on the fabrication of Cu doped bismuth ferrite (Cu-BiFeO 3 , Cu-BFO) nanoparticles via sol-gel procedure. In most of the doping cases the costly rare earth elements like La, Nd, Sm, Ce and Yb are used to replace Bi. Electrodes of Bi 1-x Cu x FeO 3 where x have the values 0.0, 0.025, 0.05, 0.075, 0.1 and 0.15 were deposited on graphitic sheets. Optimum Cu doping value was found to be at x = 0.05. Cu 2+ ions doping in place of Bi 3+ ions will reveal the roles of oxygen vacancies, as determined from XPS. The estimated values of specific capacitance was found to be 732 F/g at 0.5 A/g for the electrode at x = 0.05 in three electrode system. 5%Cu-BFO//Carbon black asymmetric supercapacitor (ASC) device can be charged and discharged reversibly at cell voltage of 0.0 up to 1.5 V when using a 0.5 M Na 2 SO 4 aqueous electrolyte. This configuration allows the ASC device to deliver a great energy density of 37.25 Wh/kg at a power density of 752 W/kg. The ASC device demonstrates excellent cycling stability, retaining 88.64 % of its initial specific capacitance after 5000 cycles. Increasing the Cu content up to 15 % causes instability in the crystal structure of BFO resulting on phase segregation into Bi 2 Fe 4 O 9 along with BFO and deterioration in the electrode overall performance. XPS showed that replacement of Cu 2+ in place of Bi 3+ disturbs the neutrality and the chemical environment of the compound. Hence to achieve neutrality and ionic balance, oxygen vacancies increase and the Fe 2+ /Fe 3+ ratio increases as well. Both oxygen vacancies and the change in the Fe ions ratio reduce electrochemical impedance and give rise to charge density. The homogenous distribution of the pores at x = 0.05 contributed greatly to its fast electrolyte ion diffusion that improved the observed capacitive properties. One has to mention here, that despite doping that contains ions with different ionic size and/or different oxidation state is unfavorable, to some extent, due to the changes they produce in the electronic structure and the chemical environment, nevertheless it is sometimes beneficial in creating new parameters in the structure that promote specific application like in the case of the current work, oxygen vacancies, increase in surface area and the mixed state valency.

One pot synthesis of nanostructured bismuth fluoride tailored for symmetric supercapacitor performance

Bi2S3 Nanorod-Stacked Hollow Microtubes Self-Assembled from Bismuth-Based Metal-Organic Frameworks As Advanced Negative Electrodes for Hybrid Supercapacitors.

Electrochemical analysis of asymmetric supercapacitors based on BiCoO3@g-C3N4 nanocomposites

Carbon Nitride Supported Ultra-fine Bismuth Sulfide Based Supercapacitor for Low Frequency Oscillator Application

One-step colloid fabrication of nickel phosphides nanoplate/nickel foam hybrid electrode for high-performance asymmetric supercapacitors

Nanostructured bismuth phosphate-based asymmetric supercapacitor: electrochemical evaluation and oscillator application

Bi-Fe Chalcogenides Anchored Carbon Matrix and Structured Core–shell Bi-Fe-P@Ni-P Nanoarchitectures with Appealing Performances for Supercapacitors

Three-dimensional hierarchical nanosheets based spherical bismuth metal-organic frameworks: Controllable synthesis and high performance for supercapacitor

Elevating energy storage performance of bismuth antimonate coupled with MXene and graphitic nanofibers in advanced supercapacitors

Concentration-dependent SILAR synthesized Di-bismuth copper oxide nano-materials electrode in asymmetric supercapacitor

Performance comparison of distinct bismuth molybdate single phases for asymmetric supercapacitor applications

Facile synthesis of nanostructured bismuth oxide on nickel foam with outstanding electrochemical behavior for supercapacitor application

Well-integrated bismuth trioxide nanotriangles on carbon cloth as a flexible faradic electrode for supercapacitor applications

Superior performance of asymmetric supercapacitor based on Cu doped bismuth ferrite electrode

Fabrication of Mn doped BiFeO3 as an electrode material for supercapacitor applications

Scalable Synthesis of Layered Bismuth Germanate (Bi12GeO20) for Supercapacitors and Sodium ion Battery Applications

Influence of Deposition Potential on Electrodeposited Bismuth‐Copper Oxide Electrodes for Asymmetric Supercapacitor

Mixed-phase bismuth ferrite oxide (BiFeO3) nanocomposites by green approach as an efficient electrode material for supercapacitor application

Rational Construction of Bi2CuO12Se4 and VGCFs@Fe2O3 Composite Electrodes for High-Performance Semi-Solid-State Asymmetric Supercapacitors

Porous Nanoframes of Sulfurized NiAl Layered Double Hydroxides and Ternary Bismuth Cerium Sulfide for Supercapacitor Electrodes

Strategically Designed Multiwalled Carbon Nanotube/Bismuth Ferrite/Polyaniline Nanocomposites and Unlocking their Potential for Advanced Supercapacitors