Abstract:In recent years, there has been widespread interest in the design of microair vehicles (MAVs) for flapping flight with high-aspect ratio wings due to their high efficiency and energy savings. However, the flexibility of a flapping wing causes the aeroelastic effect, which remains a subject of investigation. Generally, existing research simulates active bending and twisting of flexible wings under the assumption of neglecting flapping inertia. In this research, the kinematic optimization of a bionic wing with passive deformation in forward flight while undergoing flapping and pitching is considered. To this end, a computational aeroelasticity framework, which includes the three-dimensional unsteady vortex lattice method (UVLM) and the Newmark-β method, is constructed for flapping flight. Under the assumption of linear elastic deformation, this tool is capable of simulating attached flows over a thin wing and capturing unsteady effects of wakes. A bionic numerical wing with an aspect ratio of 6.5, chord Reynolds number of 1.9 × 105, and reduced frequency less than 0.1 is investigated in kinematic optimization. The computational aeroelasticity framework is combined with a global optimization algorithm to identify the optimal kinematics that maximize the propulsive efficiency under the minimum average lift constraint. Two types of numerical wings, rigid wing and flexible wing, are considered here to compare the influence of deformation on the aerodynamics of the flapping wing. The results show that the aeroelastic effect, which increases the flapping amplitude, yields a significant improvement in terms of propulsive efficiency. In addition, the optimization algorithm maximizes the thrust efficiency while satisfying the required lift. Moreover, the optimal kinematics of both the rigid wing and the flexible wing reach the maximum flapping angle, which indicates that a larger range of motions is needed for optimal kinetics when loosening the boundary conditions.

Aerodynamic Analysis and Airfoil Selection for Flexible Flapping Wings Driven by Dielectric Elastomer

Electromechanical Model-Based Adaptive Control of Multilayered Dielectric Elastomer Bending Actuator

Modelling and Control of a Dielectric Elastomer Actuator

Fabrication and Modeling of Dielectric Elastomer Soft Actuator with 3D Printed Thermoplastic Frame

Investigation of the State Transition and Moving Boundary in a Pneumatic–Hydraulic Coupled Dielectric Elastomer Actuator

Tunable Actuation of Dielectric Elastomer by Electromechanical Loading Rates

Design of Facile Dielectric Elastomer-Based Bending Module for Soft Robotics Applications

Self-healing High-performance Dielectric Elastomer Actuator with Novel Liquid-solid Interpenetrating Structure

Control of Dielectric Elastomer Soft Actuators Using Antagonistic Pairs

Electromechanical Behavior Of Fiber-Reinforced Dielectric Elastomer Membrane

Electromechanical Control and Stability Analysis of A Soft Swim-Bladder Robot Driven by Dielectric Elastomer

Model-Based Nonlinear Control of the Dielectric Elastomer Actuator with High Robustness and Precision

Design of stiffness-variable dielectric elastomer wing based on seagull characteristics and its application in avian flight bionics

Dynamic modeling of dielectric elastomer actuator with conical shape

Experimental Study on Flexible Deformation of a Flapping Wing with a Rectangular Planform

Fluid-structure Analysis of Flapping-Wing Rotorcraft Considering Stiffness Influence

A Large-Strain and Ultrahigh Energy Density Dielectric Elastomer for Fast Moving Soft Robot

Design Analysis and Actuation Performance of a Push-Pull Dielectric Elastomer Actuator

Aerodynamic performance of flexible flapping wings deformed by slack angle

Analysis of nonlinear aerodynamic performance and passive deformation of a flexible flapping wing in hover flight

Kinematic Optimization of a Flexible Wing Undergoing Flapping and Pitching