Characterization of air distribution during horizontal well air sparging with various sparging tube configurations
Bowen Liang,Xinxin Zhang,Zhanghui Wu,Lubo Tang,Xiaobin Chen
DOI: https://doi.org/10.1016/j.jclepro.2024.143402
IF: 11.1
2024-08-20
Journal of Cleaner Production
Abstract:Horizontal well air sparging (AS) technology is an efficient method for removing volatile organic compounds (VOCs) contamination from groundwater. However, there are insufficient theoretical explanations for the air flow velocity inhomogeneity in the AS process, and there are fewer studies on how the structural parameters of AS tubes affect the gas migration behavior. In this study, the air distribution characteristics of three types of AS tubes at different heights (20, 30, and 40 cm) were investigated through three-dimensional modeling experiments, and the effects of different AS pressures (30–90 kPa) on gas distribution were analyzed. The results showed that the total flow velocity output of the AS tube gradually increased with the increase of AS pressure. The 8-hole AS tube had the highest flow velocity with a peak value of 550 cm/min at 90 kPa. Dimensionless analysis showed that the 8-hole AS tube exhibits an approximately Gaussian distribution, the 25-hole AS tube had a fingered distribution, and the 25-slit AS tube had an approximate trapezoidal distribution. The 25-slit AS tube exhibited a more uniform flow velocity distribution than the other two. The internal flow velocity characteristics of the AS tube can be analyzed using the theory of homogenization of fluids. Its homogeneity is related to its structural parameters (e.g., pore spacing S and the ratio of the open area to the lateral area of the AS tube nd 2 /4DL, etc.). This study provides a valuable reference for the structural design of horizontal well AS.
environmental sciences,green & sustainable science & technology,engineering, environmental