Abstract:Utilizing catalysts to accelerate the redox kinetics of lithium polysulfides (LiPSs) is a promising strategy to alleviate the shuttle effect of lithium-sulfur (Li-S) batteries. Nevertheless, most of the reported catalysts are only effective for LiPSs reduction, resulting in the devitalization of catalysts over extended cycles as a consequence of the continuous accumulation of Li2S passivation layer. The situation gets even worse when employing mono-directional catalyst with poor electron conductivity because the charge transfer for the decomposition of solid Li2S is severely hampered. Herein, a high-conductive and dual-directional catalyst Co3C decorated on porous nitrogen-doped graphene-like structure and carbon nanotube (Co3C@PNGr-CNT) is fabricated as sulfur host, which not only promotes the precipitation of Li2S from LiPSs during discharge but also facilitates the decomposition of Li2S during subsequent charge, as evidenced by the reduced activation energies for both reduction and oxidation processes. Furthermore, the long-term catalytic stability of Co3C is corroborated by the reversible evolution of Co-C bond length over extended cycles as observed from X-ray absorption fine structure results. As a consequence, the fabricated Co3C@PNGr-CNT/S cathode delivers a low capacity decay of 0.043% per cycle over 1000 cycles at 2C. Even at high sulfur loading (15.6 mg cm(-2)) and low electrolyte/sulfur (E/S) ratio (similar to 8 mu L mg(-1)) conditions, the battery still delivers an outstanding areal capacity of 11.05 mAh cm(-2) after 40 cycles. This work provides a rational strategy for designing high-efficient bidirectional catalyst with single component for high-performance Li-S batteries. (C) 2021 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by ELSEVIER B.V. and Science Press. All rights reserved.

Electrochemical Phase Evolution of Metal‐Based Pre‐Catalysts for High‐Rate Polysulfide Conversion

Back Cover: Electrochemical Phase Evolution of Metal‐Based Pre‐Catalysts for High‐Rate Polysulfide Conversion (angew. Chem. Int. Ed. 23/2020)

Graphene Chainmail‐Enabled Moderate Precatalyst Phase Evolution for Sustainable Polysulfide Electrocatalysis in Li─S Batteries

Rücktitelbild: Electrochemical Phase Evolution of Metal‐Based Pre‐Catalysts for High‐Rate Polysulfide Conversion (angew. Chem. 23/2020)

Enhanced catalysis LiS<sub>3</sub> of radical-to-polysulfide interconversion <i>via</i> increased sulfur vacancies in lithium-sulfur batteries

Deciphering the electrocatalysis essence of cobalt diselenide in lithium-sulfur electrochemistry from crystal-phase engineering

Addressing the Prominent Li + Intercalation Process of Metal Sulfide Catalyst in Li‐S Batteries

Cooperative catalytic platinum species accelerating polysulfide redox reactions for Li-S batteries

Developing high-power Li||S batteries via transition metal/carbon nanocomposite electrocatalyst engineering

Sulfurization of transition metal inorganic electrocatalysts in Li-S batteries

Revealing the role of crystal structure to catalysis: Inverse spinel phase Co-Mn-based catalyst for Li-S batteries

Expediting Redox Kinetics of Sulfur Species by Atomic‐scale Electrocatalysts in Lithium–sulfur Batteries

A tandem electrocatalyst with dense heterointerfaces enabling the stepwise conversion of polysulfide in lithium-sulfur batteries

Phosphorous‐Based Heterostructure for the Effective Catalysis of Polysulfide Reactions with Phase Changes in High‐Sulfur‐Loading Lithium–Sulfur Batteries

Adaptively Reforming Natural Enzyme to Activate Catalytic Microenvironment for Polysulfide Conversion in Lithium-Sulfur Batteries.

An Electron-Coupled Co-ZrO2 Nanodot Heterojunction Electrocatalyst with Lewis Acid-Base Site Pairs Enables High Redox Reaction Kinetics of Li-S Batteries

Engineering single-atom catalysts as multifunctional polysulfide and lithium regulators toward kinetically accelerated and durable lithium-sulfur batteries

Origin of Phase Engineering CoTe2 Alloy Toward Kinetics‐Reinforced and Dendrite‐Free Lithium−Sulfur Batteries

Targeted Electrocatalysis for High‐Performance Lithium–Sulfur Batteries

Bidirectionally Catalytic Polysulfide Conversion by High-Conductive Metal Carbides for Lithium-Sulfur Batteries

A "Catalysis‐Immobilization‐Deposition" Stepwise Strategy toward Dynamic Equilibrium of Polysulfides Conversion and Diffusion in Lithium‐Sulfur Batteries