Abstract:Electro-reduction of O2 to generate H2O2 is an attractive alternative to the current anthraquinone process and quietly necessary for the chemical industries and environmental remediation. It is general that sufficient porous structure contributes to expose more catalytic active sites and shorten diffusion paths for the heterogeneous catalysis of O2. In this work, initially, the Fe3O4 nanoparticles embedded graphite felt (Fe3O4@GF) is prepared through a mild hydrothermal following with thermal reduction method. This special combination not only provides iron source for the electro-Fenton reaction, but also supplies rich active sites from the Fe3O4 embedded structure with abundant cracks, which are beneficial to increase the reaction rate. Compared with raw graphite felt (RGF), the fresh Fe3O4@GF exhibits superior pollutant degradation kinetics with more than 400% increase and approximately 37.8% improvement to the removal of total organic carbon. 98% decolorization of rhodamine B (RhB) can be achieved in just 5 minutes, and quickly complete 100% removal of RhB in the next few seconds. As the electro-Fenton reaction progresses, Fe3O4 dissolves in the electrolyte, leaving porous structure on the surface of the GF to form a porous GF (PGF), and the rapid radical reaction activates GF surface. Both the chemical etching of Fe3O4 and the electro-Fenton process can further increase the specific surface area, defects and actives sites of the electrode. As expected, the active PGF exhibits favorable performance of H2O2 production among in pH=1 (320.0±36.5 mg L-1), 3 (301.9±13.2 mg L-1) and 7 (320.4±21.2 mg L-1) electrolyte. The degradation performance of PGF does not significantly decay even after 20 times repeated use, indicating the good structural stability and long-term durability. The superiority of the in-situ Fe source and fast reaction kinetics for electro-Fenton of Fe3O4@GF is confirmed, and this holey-engineered strategy also provides the possibility to achieve swift water purification and open up a new way for developing efficient carbon-based electrodes.

A Flow-Through Electro-Fenton Process Using Modified Activated Carbon Fiber Cathode for Orange II Removal.

A highly energy-efficient flow-through electro-Fenton process for organic pollutants degradation

Flow-through integration of FeOCl/graphite felt-based heterogeneous electro-Fenton and Ti4O7-based anodic oxidation for efficient contaminant degradation

Enhanced Flow-Through Electro-Fenton Process Based on Rgo Aerogel Cathode: Essential Role of Sodium Tetrapolyphosphate

High-efficiency electrochemical activation of H2O2 into ·OH enabled by flow-through FeOCl-modified carbon electrode for organic pollutants degradation

Enhanced Orange II Removal Using Fe/Mn/Mg2-LDH Activated Peroxymonosulfate: Synergistic Radical Oxidation and Adsorption

Integrated electrochemically enhanced adsorption with electrochemical regeneration for removal of acid orange 7 using activated carbon fibers

Preparation of lotus-leaf-like carbon cathode for the electro-Fenton oxidation process: Hydrogen peroxide production, various organics degradation and printing wastewater treatment

Enhanced electro-Fenton performance by fluorine-doped porous carbon for removal of organic pollutants in wastewater

Enhancement of Activity of Activated Carbon Fiber for Electro-Fenton Process by Loading it with SiO 2 having Tunable Hydrophobic/Hydrophilic Moieties

Enhanced Electro-Fenton Mineralization of Acid Orange 7 Using a Carbon Nanotube Fiber-Based Cathode

Anodic Fenton Process Assisted by a Microbial Fuel Cell for Enhanced Degradation of Organic Pollutants.

Simultaneously Providing Iron Source towards Electro-Fenton Process and Enhancing Hydrogen Peroxide Production via a Fe3O4 Nanoparticles Embedded Graphite Felt Electrode.

Degradation of Acid Orange 7 in aqueous solution by a novel electro/Fe2+/peroxydisulfate process

A Novel Fenton-like System of Fe2O3 and NaHSO3 for Orange II Degradation

Accelerated Fe(II) regeneration on Fe-doped oxidized carbon nanotube enabling highly-efficient electro-Fenton process for pollutants removal

A triple-cathode electron-Fenton system for efficient Fe2+ regeneration and in-situ H2O2 electro-activation

Carbon Fiber-Based Flow-Through Electrode System (FES) for Cr(VI) Removal at Near Neutral Phs Via Cr(VI) Reduction and In-Situ Adsorption of Cr (III) Precipitates

Mineralization of an Azo Dye Acid Red 14 by Electro- Fenton'S Reagent Using an Activated Carbon Fiber Cathode

A Robust Flow-Through Platform for Organic Contaminant Removal

Flow-through heterogeneous electro-Fenton system based on the absorbent cotton derived bulk electrode for refractory organic pollutants treatment