Abstract:Modern highly sensitive and selective sensors are able to determine biologically active substances, which makes this direction one of the most popular areas of analytical chemistry. The study featured the electrochemical properties of new fiber materials based on single-wall carbon nanotubes with prospects of using them in the voltammetry of ascorbic acid. The authors developed a new technology to synthesize films from disordered single-wall carbon nanotubes by chemical vapor deposition. Fibers were produced from a solvent by wet-pulling of single-wall carbon nanotubes networks. Thin films of randomly oriented single-wall carbon nanotube bundles were deposited downstream of a floating aerosol CVD reactor, which included a high temperature furnace with a quartz tube. The synthesis of the single-wall carbon nanotube samples was performed at 825°C. Ethanol served as carbon source while ferrocene was used as catalyst precursor. The single-wall carbon nanotubes were collected on a nitrocellulose filter in the form of films with transmittances of 10% in the middle of the visible wavelength (550 nm). The method was optimized to involve air annealing at 300–320°C and a treatment with strong inorganic acids, i.e., HCl, HNO3 + H2SO4. The voltammetric curves recording included background electrolyte, scan rate, and preconditioning. These parameters were selected experimentally to obtain the maximal sensor response to ascorbic acid content. The anodic peak of ascorbic acid in the phosphate buffer electrolyte (pH 6.86) was observed at a potential of +0.2 V. The current and peak area of ascorbic acid oxidation depended neither on the time nor on the conditioning potential of the sensor. The linear dependences of these parameters on the concentration of ascorbic acid stayed within 50–500 μmol/L (8.8–90 mg/L) at a scan rate of 0.1 mV/s. The single-wall carbon nanotube microsensor had a length of 0.5 cm and an average width of 400 μm. Its sensitivity was two times as high as that of a disk glassy carbon electrode with a diameter of 5 mm. The experimental sensors proved effective in determining ascorbic acid in food products, pharmaceuticals, and biological fluids.

A Metal-Organic Frameworks@ Carbon Nanotubes Based Electrochemical Sensor for Highly Sensitive and Selective Determination of Ascorbic Acid

Electrocatalytic Oxidation of Ascorbic Acid on Quaternized Carbon Nanotubes/Ionic Liquid-Polyaniline Composite Film Modified Glassy Carbon Electrode

Layer-By-Layer Assembly of Poly(P-Aminobenzene Sulfonic Acid)/Quaternary Amine Functionalized Carbon Nanotube/P-Aminobenzene Sulfonic Acid Composite Film on Glassy Carbon Electrode for the Determination of Ascorbic Acid

In Situ Self-Assembled Cationic Lanthanide Metal Organic Framework Membrane Sensor for Effective MnO4− and Ascorbic Acid Detection

A Novel Flexible Electrochemical Ascorbic Acid Sensor Constructed by Ferrocene Methanol doped Multi‐walled Carbon Nanotube Yarn

A Novel Electrochemical Aptasensor Based on Polyaniline and Gold Nanoparticles for Ultrasensitive and Selective Detection of Ascorbic Acid.

MOF-derived high-density carbon nanotubes "tentacle" with boosting electrocatalytic activity for detecting ascorbic acid

Amperometric Sensor for Ascorbic Acid Based on a Glassy Carbon Electrode Modified with Gold-Silver Bimetallic Nanotubes in a Chitosan Matrix

Electrochemical nanosensor based on Ag-doped TiO2 nanotubes for detecting ascorbic acid

Electrochemical Sensors Based on Single-Wall Carbon Nanotubes in Voltammetric Ascorbic Acid Tests

Metal/covalent-organic frameworks-based electrochemical sensors for the detection of ascorbic acid, dopamine and uric acid

Solid-contact Potentiometric Sensor for Ascorbic Acid Based on Cobalt Phthalocyanine Nanoparticles As Ionophore.

Highly Heterogeneous Morphology of Cobalt Oxide Nanostructures for the Development of Sensitive and Selective Ascorbic Acid Non-Enzymatic Sensor

Modulation of copper sites in porphyrin metal–organic frameworks for electrochemical ascorbic acid sensing

Novel and Extremely Sensitive NiAl2O4-NiO Nanostructures on an ITO Sensing Electrode for Enhanced Detection of Ascorbic Acid

A Two‐Dimensional Metal–Organic Framework As a Fluorescent Probe for Ascorbic Acid Sensing

Ascorbic Acid Sensor Based on Ion-Sensitive Field-Effect Transistor Modified with MnO2 Nanoparticles

Layer-by-layer growth of Cu3(HHTP)2 films on Cu(OH)2 nanowire arrays for high performance ascorbic acid sensing

Sea-urchin-structured NiCo2O4 decorated nitrogen-doped graphene for enhanced electrochemical detection of ascorbic acid

Electrochemical sensor based on carbon-supported NiCoO2 nanoparticles for selective detection of ascorbic acid

Nitrogen-doped hierarchical porous carbon nanomaterial from cellulose nanocrystals for voltammetric determination of ascorbic acid