Abstract:Silicon is considered one of the most promising negative electrode materials for future lithium ion batteries (LIBs) due to its high capacity (3579 mAh g-1 , based on Li15Si4) and its proper delithiation voltage (~ca. 0.4 V vs. Li/Li+). However, the huge volume change (~300 %) of Si during lithiation/delithiation leads to fracture and pulverization and of Si particles, continuous formation of solid-electrolyte interphase (SEI), and, consequently, fast capacity fade. Mechanical degradation remains a major barrier for commercializing Si electrodes. The most likely commercial Si electrodes, i.e., Si composite electrodes consisting of Si particles, conductive additives, polymeric binders, and porosity, are likely to exhibit mechanical properties and volume expansion/shrinkage behavior that are different from that of individual Si particles and Si thin films. Despite of a growing effort on electro-mechanical modeling of Si electrodes, the mechanical behavior and microstructure evolution of Si composite electrodes during lithiation/delithiation are largely unknown. To fill this gap, we developed an environmental nanoindentation system installed inside an argon-filled glovebox [Adv. Energy Mater., 10.1002/aenm.201702578 (2017) and Scr. Mater. 130, 191 (2017)] to measure Young’s modulus (E) and hardness (H) of Si composite electrodes during lithiation/delithiation under both dry and wet (the liquid electrolyte) conditions. In contrast to Si films, E and H values of Si/polyvinylidene fluoride (PVDF) electrodes and Si/Na-carboxymethyl cellulose (Na-CMC) electrodes, under both dry and wet conditions, increase with increasing Li concentration within each electrochemical cycle and decrease with increasing cycle number. The E and H values of the composite electrodes under dry condition are smaller than that under wet condition due to the softening of polymeric binders in the electrolyte. The porosity of both composite electrodes decreases with increasing Li concentration and increases with increasing cycle number. At the same state-of-charge (SOC), Si/Na-CMC electrodes have smaller porosity and better mechanical integrity than Si/PVDF electrodes, which is one of the reasons why Na-CMC works better than PVDF as a binder. The results show that mechanical integrity and microstructural stability play a vital role in improving the performance and durability of Si composite electrodes. The relationships between E, H, porosity, and SOC is useful to develop and validate electro-mechanical models of electrodes. They also provide valuable insight into developing high capacity Si electrodes. Furthermore, the environmental nanoindentation method can be used to measure the mechanical behavior of a wide range of electrochemical energy storage materials under realistic working conditions.

Elastic Softening of Group IVA (si, Ge and Sn) Materials by Electron and Lithium Doping

Implication of Mechanical Properties of Li-S Binary Compounds Obtained from the First-Principles Study

Atomistic Insights into the Thermal Transport Properties of Inorganic Components of Solid Electrolyte Interphase (SEI) in Lithium-Ion Batteries

Modelling and simulation of electron-rich effect on Li diffusion in group IVA elements (Si, Ge and Sn) for Li ion batteries

Lithiation of SiO2 in Li-ion Batteries: in Situ Transmission Electron Microscopy Experiments and Theoretical Studies.

Exploring the Strain-Enhanced Li-Ion Migration in Li1.33Al0.33Ti1.67(PO4)3 Solid Electrolyte

Electron-rich driven electrochemical solid-state amorphization in Li-Si alloys

Composites of Piezoelectric Materials and Silicon as Anodes for Lithium-Ion Batteries

High Capacity Group-Iv Elements (si, Ge, Sn) Based Anodes for Lithium-Ion Batteries

Concentration Dependent Properties and Plastic Deformation Facilitate Instability of the Solid-Electrolyte Interphase in Li-ion Batteries

Understanding the Ionic Diffusivity in the (Meta)Stable (Un)doped Solid-State Electrolyte from First-Principles: A Case Study of LISICON

In Situ Measurement of Mechanical Property and Stress Evolution in a Composite Silicon Electrode

Deformation and failure of lithiated Si electrodes of Li-ion batteries

Insights into stability, electronic properties, defect properties and Li ions migration of Na, Mg and Al-doped LiVPO4F for cathode materials of lithium ion batteries: A first-principles investigation

Heterogeneous Doping via Nanoscale Coating Impacts Mechanics of Li Intrusion in Brittle Solid Electrolytes

Insights into the Electrochemical Stability and Lithium Conductivity of Li4MS4 (M = Si, Ge, and Sn).

Doping Implications of Li Solid State Electrolyte Li7La3Zr2O12

Effect of disorder and doping on electronic structure and diffusion properties of Li$_{3}$V$_{2}$O$_{5}$

Electro-chemo-mechanical behavior of lithium-ion battery electrodes

Micro-scale mismatches of electrically conductive and mechanically resilient regimes in Li-variant sulfide conductors

Si‐Doping Mediated Phase Control from Β‐ to Γ‐form Li3VO4 Toward Smoothing Li Insertion/Extraction