Abstract:Oxygen-enriched combustion is an important way to improve the combustion efficiency of hydrocarbon fuels and reduce soot formation. In this work, the difference of the effects of oxygen concentration on flame characteristics and soot formation in diffusion and partially premixed flames were comprehensively analyzed. The results showed that both the peak temperature and the OH increase monotonically whether oxygen is added into co-flow or fuel flow. In diffusion flame, the flame height decreases linearly with the increasing oxygen, while the addition of oxygen into fuel flow has little effect on the flame height. As the oxygen in co-flow increases, the peak soot volume fraction (SVF) increases monotonically due to the synergistic increase of HACA and PAHs condensation rates. As the oxygen in fuel flow increases from 0% to 20%, the peak SVF first decreases and then increases, reaching a minimum at 15%, which attributes to the competition of the decreased HACA rate and the increased PAHs condensation rate. With the addition of oxygen into fuel stream, the SVF along the flame centerline increases at the second stage, which is quite different from that of diffusion flame, whose SVF remains stable after inception and before complete oxidation. In the diffusion flames, as the oxygen concentration increases, the peak values of O-2 oxidation and OH oxidation increase linearly. However, in the partially premixed flames, the OH oxidation rate is insensitive to the oxygen concentration, and the O-2 oxidation rate has a tolerance limit of 15%.

Numerical Investigation into the Effects of Oxygen Concentration on Flame Characteristics and Soot Formation in Diffusion and Partially Premixed Flames