Abstract:Microwave dielectric ceramics are vital for filters, dielectric resonators, and dielectric antennas in the 5G era. It was found that the (Cu1/3Nb2/3)4+ substitution can effectively adjust the TCF (temperature coefficient of resonant frequency) of Li2TiO3 and simultaneously increase its Q × f (Q and f denote the quality factor and the resonant frequency, respectively) value. Notably, excellent microwave dielectric properties (εr (permittivity) ≈ 18.3, Q × f ≈ 77,840 GHz, and TCF ≈ +9.8 ppm/°C) were achieved in the Li2Ti0.8(Cu1/3Nb2/3)0.2O3 (LTCN0.2) ceramic sintered at 1140 °C. Additionally, the sintering temperature of LTCN0.2 was reduced to 860 °C by the addition of 3 wt % H3BO3, exhibiting superior microwave dielectric properties (εr ≈ 21.0, Q × f ≈ 51,940 GHz, and TCF ≈ 1.4 ppm/°C) and being chemically compatible with silver. Moreover, LTCN0.2 + 3 wt % H3BO3 ceramics were designed as a patch antenna and a dielectric resonator antenna, both of which showed high simulated radiation efficiencies (88.4 and 93%) and gains (4.1 and 4.03 dBi) at the center frequencies (2.49 and 10.19 GHz). The LTCN0.2 + 3 wt % H3BO3 materials have promising future application for either 5G mobile communication devices and/or in low-temperature co-fired ceramic technology owing to their high Q, low sintering temperature, small density, and good temperature stability.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c18836?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c18836</a>.Refined lattice parameters of LTCNx (0 ≤ x ≤ 0.4) ceramics (Table S1), Raman spectra of LTCNx (0 ≤ x ≤ 0.4) ceramics (Figure S1), SEM images and densities of the LTCNx (0 ≤ x ≤ 0.4) specimens (Figure S2), phonon parameters achieved from the fitting of the infrared reflectivity spectra of the LTCN0.2 specimen (Table S2), phonon parameters achieved from the fitting of the infrared reflectivity spectra of the LTCN0.2 + 3 wt % H3BO3 ceramic (Table S3), and optimized parameters of the proposed patch antenna (Table S4) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c18836/suppl_file/am0c18836_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Temperature stable Li2Ti0.75(Mg1/3Nb2/3)0.25O3-based microwave dielectric ceramics with low sintering temperature and ultra-low dielectric loss for dielectric resonator antenna applications

Low-temperature Co-Fired Ceramics with High Thermal Expansion and Reliability for Millimeter-Wave Antennas

Temperature stable Li<sub>2</sub>Ti<sub>0.75</sub>(Mg<sub>1/3</sub>Nb<sub>2/3</sub>)<sub>0.25</sub>O<sub>3</sub>-based microwave dielectric ceramics with low sintering temperature and ultra-low dielectric loss for dielectric resonator antenna applications

Novel ultra-low loss and low-fired Li8MgxTi3O9+xF2 microwave dielectric ceramics for resonator antenna applications

A low-sintering temperature microwave dielectric ceramic for 5G LTCC applications with ultralow loss

Design Of A High-Efficiency And -Gain Antenna Using Novel Low-Loss, Temperature-Stable Li2ti1-(X) (Cu1/3nb2/3)(X)O-3 Microwave Dielectric Ceramics

Temperature-Stable X(na0.5bi0.5)moo4–(1–x)moo3 Composite Ceramics with Ultralow Sintering Temperatures and Low Dielectric Loss for Dielectric Resonator Antenna Applications

Low‐temperature‐sintered MgO‐based Microwave Dielectric Ceramics with Ultralow Loss and High Thermal Conductivity

High Permittivity and Low Loss Microwave Dielectrics Suitable for 5G Resonators and Low Temperature Co-Fired Ceramic Architecture

Temperature-stable Li4Ti3O8 composite microwave dielectric ceramic and its applications in dielectric resonator antennas

Low temperature sintered MgO–based microwave dielectric ceramics with ultra‐low loss and high thermal conductivity

Low temperature sintered Li6MgTiNb1-xVxO8F microwave dielectric ceramics with high-quality factor

Temperature stable microwave dielectric ceramic 0.3Li2TiO3–0.7Li(Zn0.5Ti1.5)O4 with ultra-low dielectric loss

Ultra-Low Loss Microwave Dielectric Ceramic Li 2 Mg 2 TiO 5 and Low-Temperature Firing Via B 2 O 3 Addition

Temperature stable Li5.5Nb1.5O6F-based microwave dielectric ceramics for LTCC applications

Design of a High-Efficiency and -Gain Antenna Using Novel Low-Loss, Temperature-Stable Li 2 Ti 1 – x (Cu 1/3 Nb 2/3 ) x O 3 Microwave Dielectric Ceramics

Microwave Dielectric Properties and Low Temperature Firing of (1 − X)li2zn3ti4o12 –xli2tio3 (0.2 ≤ X ≤ 0.8) Ceramics with B2O3–CuO Addition

Ultra-low dielectric loss lithium-based, temperature stable microwave dielectric ceramics

Li4Mg3Ti2O9: A novel low-loss microwave dielectric ceramic for LTCC applications

Temperature Stable Sm(Nb1−xVx)O4 (0.0 ≤ X ≤ 0.9) Microwave Dielectric Ceramics with Ultra-Low Dielectric Loss for Dielectric Resonator Antenna Applications

Temperature-Stable x (Na 0.5 Bi 0.5 )MoO 4 –(1– x )MoO 3 Composite Ceramics with Ultralow Sintering Temperatures and Low Dielectric Loss for Dielectric Resonator Antenna Applications