Failure mode and effects analysis using intuitionistic fuzzy hybrid TOPSIS approach

LiuHu-Chen,YouJian-Xin,ShanMeng-Meng,ShaoLu-Ning

IF: 3.732

2015-01-01

Soft Computing

Abstract:Failure mode and effects analysis (FMEA) is an effective reliability analysis technique used to identify and evaluate potential failures in systems, products, processes, and/or designs. In traditio...

What problem does this paper attempt to address?

A Novel Method for Failure Mode and Effect Analysis Based on the Fermatean Fuzzy Set and Bonferroni Mean Operator

Liangsheng Han,Mingyi Xia,Yang Yu,Shuai He

DOI: https://doi.org/10.3390/machines12050332

IF: 2.899

2024-05-14

Machines

Abstract:Failure mode and effects analysis (FMEA) helps to identify the weak points in the processing, manufacturing, and assembly of products and plays an important role in improving product reliability. To address the shortcomings of the existing FMEA methods in terms of the uncertainty treatment of information and not considering the weights and correlations between risk factors, we propose a new FMEA method. In this paper, the Fermatean fuzzy Z-number (FFZN) is proposed by fusing the Fermatean fuzzy number and Z-number. Extending it to the Bonferroni mean (BM) operator, the Fermatean fuzzy Z-number-weighted Bonferroni mean (FFZWBM) operator is proposed. A new FMEA method is proposed based on this operator. In order to overcome the factors not considered in the FMEA method, two new risk factors are proposed and added. The ability of experts to express fuzzy information is enhanced by introducing the FFS. The weights and correlations between the influencing factors can be handled by aggregating the evaluation information using the FFZWBM operator. Finally, the proposed method is applied to an arithmetic example and the accuracy of the proposed method is proved by teaming it with other methods.

engineering, mechanical, electrical & electronic
Failure mode and effects analysis using Dempster-Shafer theory and TOPSIS method: Application to the gas insulated metal enclosed transmission line (GIL)

Zhen Wang,Jian-Min Gao,Rong-Xi Wang,Kun Chen,Zhi-Yong Gao,Yao Jiang

DOI: https://doi.org/10.1016/j.asoc.2018.06.015

IF: 8.7

2018-09-01

Applied Soft Computing

Abstract:Failure mode and effects analysis (FMEA) as a useful tool in safety and reliability analysis to identify and eliminate known or potential failures from the process of product design, development and production has been widely used in a variety of industries. However, in traditional FMEA, there are two big flaws that of the acquisition and aggregation of experts’ diversity evaluations and the calculation of the risk priority number of failure modes. In our paper, an improved FMEA approach based on Dempster-Shafer Theory (DST) and Technique for Ordering Preference by Similarity to Ideal Solution (TOPSIS) method is proposed to dispose the flaws for improving the effectiveness of traditional FMEA. In the proposed FMEA approach, a new aggregation method on the basis of DST is introduced for aggregating various kind of evaluations, then the TOPSIS method is utilized to rank the failure modes according to the evaluations in relation to their severity, occurrence and detectability. Based on DST and TOPSIS method, the proposed FMEA approach can well capture and aggregate diversity evaluations of experts and rank the failure modes under a compromise way with the condition of various uncertainties. Finally, the proposed FMEA approach is applied to the hazard analysis of the failure modes identified in a gas insulated metal enclosed transmission line (GIL) and gets a good result which consistent with practical engineering background. By the analysis and comparison with other methods, we find that the proposed approach is more applicable in real application.

computer science, artificial intelligence, interdisciplinary applications
Advanced FMECA Method Based on Intuitionistic 2-Tuple Linguistic Variables and the Triangular Fuzzy Analytic Hierarchy Process

Guangze Pan,Dan Li,Qian Li,Yaqiu Li,Yuanhang Wang

DOI: https://doi.org/10.1155/2022/1495934

2022-06-07

Wireless Communications and Mobile Computing

Abstract:Failure mode effects and criticality analysis (FMECA) is a commonly adopted approach to defining, assessing, and reducing possible failures in designs, systems, processes, products, and services. Traditional FMECA ranks the failure modes of products based on a risk priority number (RPN), which is obtained by multiplying the risk elements. Conventional FMECA has the shortcomings of badly handling unknown information and unreasonably assessing RPNs. To deal with these issues, an advanced FMECA method based on intuitionistic 2-tuple linguistic variables (I2LVs) and the triangular fuzzy analytic hierarchy process (TFAHP) is proposed. In this method, the fuzzy evaluation of risk elements given by different FMECA members is represented by I2LVs, which can efficiently handle unknown information. The TFAHP method is adopted to assess the weights of risky elements and rank the risk priorities of different failure modes. Finally, an application case of an insulated-gate bipolar transistor is used to verify the effectiveness and robustness of the proposed method.

computer science, information systems,telecommunications,engineering, electrical & electronic
Fusion Assessment of Safety and Security for Intelligent Industrial Unmanned Systems

Rongyao Cai,Xiao Xv,Zhengming Lu,Kexin Zhang,Yong Liu

DOI: https://doi.org/10.1109/isas61044.2024.10552597

2024-01-01

Abstract:Fault tree analysis is the most commonly used methodology in industrial safety analysis to predict the probability or frequency of system failure. Although fault tree analysis has been proposed for more than six decades, the assumptions used in most commercial fault tree analysis codes have not changed significantly, which limits the ability of the method to represent design, operation, and maintenance characteristics in the context of the increasing complexity and specialization of modern industrial systems. The basic setup of traditional fault trees is unable to include dependencies between events, time-varying failures, and repair rate realities to explain complex maintenance strategies. To address the above shortcomings, we propose a fusion tree model combining fault tree and attack tree, and simplify the causal structure of the fusion tree by modularization, and utilize the dynamic Markov model to represent the complex coupling relationship between components or nodes. Finally, we demonstrate the calculation process of fusion tree in pressure vessel systems with temporal control.
An Integrated Approach for Failure Mode and Effects Analysis Based on Fuzzy Best-Worst, Relative Entropy, and VIKOR Methods

Zhang-peng Tian,Jian-qiang Wang,Hong-yu Zhang

DOI: https://doi.org/10.1016/j.asoc.2018.03.037

IF: 8.7

2018-01-01

Applied Soft Computing

Abstract:In general, analysis of failure modes and their effects requires a group of experts to tackle substantial uncertainties associated with the risk evaluation process. To date, to overcome one or more of the uncertainty-related issues, an increasing number of failure mode and effects analysis (FMEA) models based on multi-criteria decision-making (MCDM) methods have been developed. However, most of the improvements have not cautiously considered the process of assigning importance weights to risk factors and FMEA team members during FMEA. This study aims to enhance the performance of the classic FMEA and to propose an integrated fuzzy MCDM approach for FMEA. First, a fuzzy best-worst method is used to obtain the weights of risk factors. Second, an integrated structure based on fuzzy proximity and fuzzy similarity entropy weights is developed to obtain the weights of FMEA team members with respect to different risk factors. Finally, a fuzzy VIKOR (Vlsekriterijumska optimizacija i KOm-promisno Resenje) approach is employed to obtain the risk priorities of failure modes. The applicability and effectiveness of the proposed approach is validated through an illustrative example concerning risk analysis of a grinding wheel system. The results of sensitivity and comparative analyses show that the proposed approach is valid and can provide valuable and effective information in assisting risk management decision-making. (C) 2018 Elsevier B.V. All rights reserved.
A novel failure mode and effect analysis method with spherical fuzzy entropy and spherical fuzzy weight correlation coefficient

Qian-Xia Ma,Xiao-Min Zhu,Kai-Yuan Bai,Run-Tong Zhang,Dong-Wei Liu

DOI: https://doi.org/10.1016/j.engappai.2023.106163

IF: 8

2023-03-25

Engineering Applications of Artificial Intelligence

Abstract:As a proactive reliability analysis technique, the purpose of failure mode and effect analysis (FMEA) is the detection of all failures and their effects within a system, and the determination of the causes of these failures. However, the traditional FMEA method shows some important drawbacks regarding failure mode evaluations, risk factor weights and risk priority ranking, etc. This paper aims to develop a novel FMEA to improve the performance of FMEA by using spherical fuzzy sets (SFSs) and spherical fuzzy weight correlation coefficient (SF-WCC). The method mainly includes three stages. The SFS is applied to capture risk evaluation information because it comprehensively considers the information expression in different scenarios in the first stage. A spherical fuzzy projection model is introduced to calculate the expert weights objectively for reducing the information difference caused by experience, psychology and other cognitive factors of experts in the second stage. Meanwhile, the spherical fuzzy entropy is defined to determine the incomplete weights of risk factors by constructing an optimization model in the second stage. The SF-WCC is proposed to prioritize the failure modes to avoid the prioritization controversy of failure modes by using different distance formulas in the third stage. In the experiment, a practical example is presented to illustrate the applicability and effectiveness of the proposed method, and results show that the proposed approach offers a reliable tool for practical FMEA problems. The conclusion is that the proposed method is applicable to multiple actual scenarios as a reliable risk assessment technology.

automation & control systems,computer science, artificial intelligence,engineering, electrical & electronic, multidisciplinary
A method based on q-rung orthopair fuzzy cognitive map and TOPSIS method for failure mode and effect analysis considering risk causal relationships

Qianxia Ma,Xiaomin Zhu,Qian Pu,Jian Liu,Guanhua Fu,Runtong Zhang

DOI: https://doi.org/10.1016/j.engfailanal.2024.107970

IF: 4

2024-01-14

Engineering Failure Analysis

Abstract:As a preventive maintenance technique, failure mode and effect analysis (FMEA) is widely applied to determine and eradicate possible failures. In recent years, many FMEA methods have been developed to address the limitations of traditional FMEA methods in failure mode (FM) assessment, weight calculation, and FM prioritization in complex uncertain environments. However, due to the complexity of equipment, systems, services, etc., there is an inevitable influence on causal relationships between FMs, which is rarely considered by existing methods. Therefore, a novel FMEA method, which integrates the technique for order preference by similarity to the ideal solution (TOPSIS) of q-rung orthopair fuzzy set (q-ROFS) and q-rung orthopair fuzzy cognitive map (q-ROFCM), is proposed for reasoning the relationships between FMs. The design of the novel method, named q-ROFCM FMEA, involves three stages. The q-ROFS is applied to evaluate the risk factors for capturing more ambiguous information in the first stage. The q-ROFCM is proposed and the causal relationship between FMs is integrated to describe the impact of the relationships on the evaluation results through the dynamic behavior of FMs in the second stage. In the third stage, the TOPSIS method is applied to determine the priority ranking of FMs based on more reliable similarity measurement results of the projection measure. The proposed new method is applied to the FM risk assessment of power units in the railway turnout system. The competitiveness and effectiveness of the proposed method have been demonstrated by comparison with other classic methods and sensitivity analysis.

engineering, mechanical,materials science, characterization & testing
An Extended TODIM Method with Unknown Weight Information Under Interval-Valued Neutrosophic Environment for FMEA

Jianping Fan,Dandan Li,Meiqin Wu

DOI: https://doi.org/10.2991/ijcis.d.201109.003

IF: 2.259

2020-01-01

International Journal of Computational Intelligence Systems

Abstract:Failure mode and effect analysis (FMEA) is a powerful risk assessment tool to eliminate the risk and improve the reliability. In this article, a novel risk priorization model based on extended TODIM (an acronym in Portuguese of interactive and multiple attribute decision-making) method under interval-valued neutrosophic environment is proposed. Firstly,...

computer science, artificial intelligence, interdisciplinary applications
Fuzzy smart failure modes and effects analysis to improve safety performance of system: Case study of an aircraft landing system

Sahand Daneshvar,Mohammad Yazdi,Kehinde A. Adesina

DOI: https://doi.org/10.1002/qre.2607

2020-01-08

Quality and Reliability Engineering International

Abstract:Failure modes and effects analysis (FMEA) is a safety and reliability technique that is widely used to evaluate, design, and process a system against diverse possible ways through which the potential failure has a tendency to occur. In conventional FMEA, the risk evaluation is determined by risk priority number (RPN) obtained by multiplying of three risk factors—severity, occurrence, and detection. However, because of many shortages in conventional FMEA, the RPN scores have been widely criticized along issues bothering on ambiguity and vagueness, scoring, appraising, evaluating, and selecting corrective actions. In this paper, we propose a new integrated fuzzy smart FMEA framework where the combination of fuzzy set theory, analytical hierarchy process (AHP), and data envelopment analysis (DEA) is used, respectively, to handle uncertainty and to increase the reliability of the risk assessment. These are achieved by employing a heterogeneous group of experts and determining the efficiency of FMEA mode with adequate priority and corrective actions using RPN, time, and cost as indicators. A numerical example (aircraft landing system) is provided to exemplify the feasibility and effectiveness of the proposed model. The outputs of the proposed model compared with the conventional risk assessment technique results show its effectiveness, reliability, and propensity for real applications.

engineering, industrial, multidisciplinary,operations research & management science
Failure Analysis of Metro Door System Based on Fuzzy TOPSIS

Xiao-qing Cheng,Yong Qin,Li-min Jia,Zheng-yu Zhang

DOI: https://doi.org/10.1007/978-981-10-3551-7_28

2018-01-01

Abstract:Door system is a key subsystem of metro train, and conducting failure analysis to determine the failure modes which have great criticality on door system can be helpful for improving door reliability and perfecting maintenance decision. There being ambiguity in evaluating risk factors, the fuzzy theory is introduced into the TOPSIS to build the fuzzy TOPSIS method. Firstly, to conduct fuzzy evaluation on risk factors of each failure mode and to obtain weighted decision matrix, then the closeness coefficient of each failure mode could be obtained by the weighted decision matrix; finally, by conducting failure analysis on metro door system using this method, it can be concluded that the modes 'EDCU function is broken' 'Nut component wears out' and 'Limit switch S1 wears out' have great criticality on door system. The result is consistent with maintenance experts in the field and could provide technical support for design and maintenance of door system.
A New Model for Failure Mode and Effect Analysis Integrating Linguistic Z-Numbers and Projection Method

Jia Huang,Dong-Hui Xu,Hu-Chen Liu,Ming-Shun Song

DOI: https://doi.org/10.1109/tfuzz.2019.2955916

IF: 12.253

2021-03-01

IEEE Transactions on Fuzzy Systems

Abstract:As a proactive reliability analysis tool, failure mode and effect analysis (FMEA) was widely utilized in various industries to guarantee safety and reliability. Recently, many researchers in this field have emphasized the limitations of this technique, such as in failure mode evaluation, risk factor weighting, and failure mode prioritization. The objective of this article is to develop a new FMEA model combining linguistic Z-numbers and an extended projection method to enhance the inherent characteristics of FMEA. Specifically, the linguistic Z-numbers are used to express experts' risk assessment information and the reliability of the assessment result. The normal projection method is extended to determine the risk priority of the failure modes considered in FMEA. Moreover, the relative weights of risk factors are derived objectively based on the idea of technique for order preference by similarity to ideal solution (TOPSIS) method. A practical risk evaluation case of aircraft landing system is given for verifying the applicability and effectiveness of the proposed FMEA. The results show that the proposed linguistic Z-number projection model is practical and flexible, which can not only depict experts' complex and uncertain risk evaluation information accurately, but also obtain more accurate risk prioritization of failure modes.

computer science, artificial intelligence,engineering, electrical & electronic
Primary failure mode and effects analysis with function-motion-action hierarchy structure for mechatronic systems

Zhi-Chao Wang,Yan Ran,Xin Yang,Xinlong Li,Yifan Chen,Genbao Zhang

DOI: https://doi.org/10.1016/j.engfailanal.2021.105775

IF: 4

2021-12-01

Engineering Failure Analysis

Abstract:Failure mode and effects analysis (FMEA) is a systematic bottom-up structured method used originally in aerospace systems then electronic systems to implement failure analysis, criticality analysis, and failure clearance. With its effective application, FMEA has been extended rapidly into mechatronic systems and others to improve system reliability. However, there exist different compositions, loading forms, operation modes, and failure mechanisms for diverse kinds of systems, so the formulaic extension of FMEA usually is not suitable for the actual situation of followers. In this paper, we propose a function-motion-action (FMA) hierarchy structure especially suitable for mechatronic systems, which focuses on describing and analyzing failure behaviors such as identifying failure modes, analyzing failure causes, and mapping failure effects at each system structure layer without vague and overlapping interpretations. Three risk factors namely occurrence, detection or non-detection, and severity are both defined for each of failure behaviors at each system structure layer, in which the occurrence describes all failure behaviors and the severity is reliant on the condition of the detection and non-detection about all failure behaviors. A primary risk calculation model using quantitative risk data is established to garner the risk level of each failure, based on which multiple and specific risk levels of each failure are explained when considering different levels of failure effects and different combinations of control methods.

engineering, mechanical,materials science, characterization & testing
A novel method for weighting decision makers for failure mode and effect analysis under intuitionistic fuzzy environment

Dilara Akkus,Ozlem Muge Testik

DOI: https://doi.org/10.1002/qre.3510

2024-02-28

Quality and Reliability Engineering International

Abstract:This study introduces an innovative method to implement Failure Mode and Effect Analysis (FMEA) in an Intuitionistic Fuzzy (IF) environment and targets inherent limitations of traditional FMEA, particularly its reliance on precise numerical values that can lead to human subjectivity and compromise accuracy of analysis. The primary aim is to increase the objectivity in evaluating Failure Modes (FMs) in industrial settings, thus enhancing safety and quality assessments. The novel approach integrates the Measurement Alternatives and Ranking according to the Compromise Solution (MARCOS) method within an IF framework. An implementation at a defense industry company is performed for evaluation of the FMs by four Decision Makers (DMs), each possessing different levels of experience and system knowledge. A key innovation of this study is the unique weighting methodology applied to DMs, based on predefined rules, which acknowledges and quantifies their varied expertise and insights. Our methodology significantly contributes to the study's practicality and significance in ranking FMs, emphasizing its effectiveness, robustness, and accuracy. The findings reveal that this method greatly reduces the subjectivity found in traditional FMEA, also providing a more detailed and reliable assessment. This is achieved by adapting the analysis to the specific knowledge levels of the DMs, leading to more dependable and objective quality evaluations in industrial processes. The application of this method in the real‐world setting demonstrates its practical relevance and potential for wider adoption.

engineering, industrial, multidisciplinary,operations research & management science
Probabilistic Fuzzy System for Evaluation and Classification in Failure Mode and Effect Analysis

José Jovani Cardiel-Ortega,Roberto Baeza-Serrato

DOI: https://doi.org/10.3390/pr12061197

IF: 3.5

2024-06-12

Processes

Abstract:Failure Mode and Effect Analysis (FMEA) is an essential risk analysis tool that is widely applicable in various industrial sectors. This structured technique allows us to identify and assign priority levels to potential failures that violate the reliability of a system or process. Failure evaluation occurs in a decision-making environment with uncertainty. This study proposes a probabilistic fuzzy system that integrates linguistic and stochastic uncertainty based on a Mamdani-type model to strengthen the FMEA technique. The system is based on analyzing the frequency of failures and obtaining the parameters to determine the probability of occurrence through the Poisson distribution. In addition, the severity and detection criteria were evaluated by the experts and modeled using the Binomial distribution. The evaluation result is a discrete value analogous to the process of obtaining the success or failure of the expert generating the evaluation of 10 Bernoulli experiments. Three fuzzy inference expert systems were developed to combine multiple experts' opinions and reduce linguistic subjectivity. The case study was implemented in the knitting area of a textile company in the south of Guanajuato to validate the proposed approach. The potential failure of the knitting machinery, which compromises the top tension subsystem's performance and the product's quality, was analyzed. The proposed system, which is based on a robust mathematical model, allows for reliable fault evaluation with a simple scale. The classification performed by the system and the one performed by the experts has similar behavior. The results show that the proposed approach supports decision-making by prioritizing failure modes.

engineering, chemical
A Risk Evaluation and Prioritization Method for FMEA with Prospect Theory and Choquet Integral

Weizhong Wang,Xinwang Liu,Yong Qin,Yong Fu

DOI: https://doi.org/10.1016/j.ssci.2018.08.009

IF: 6.392

2018-01-01

Safety Science

Abstract:Failure modes and effect analysis (FMEA) as one of the most effective risk analysis methods, has been widely adopted in various fields to improve the security and reliability of systems. The risk evaluation and prioritization of failure mode is an important issue in FMEA approach, which can be regarded as a MCDM (multi-criteria decision making) problem. Different researches indicate that the decision maker's psychological behavior and interaction relationships among risk factors have a major impact on this process. Nevertheless, such influence is neglected in the existing literature on FMEA approach. In this paper, a new approach considering decision maker's psychological behavior and interaction relationships among risk factors simultaneously is developed to solve the risk evaluation and prioritization in FMEA method. First, to consider the FMEA team member's psychological behavior in the risk evaluation in FMEA approach, the prospect theory is adopted to determine risk evaluation of risk factors. Second, with regard to the interaction relationships among risk factors, the fuzzy measure and Choquet integral are used to aggregate the prospect value of failure modes on each risk factors. After calculating prospect value of each failure mode, the entropy weighting method is employed to obtain the overall risk priority number (RPN) associated with each failure mode, and the relative preference relation is introduced for failure mode's prioritization. Finally, an illustrative case of aircraft landing system is selected to demonstrate the application and feasibility of the proposed hybrid FMEA method, and a comparison study is also performed to validate the effectiveness of the novel FMEA model.
A new approach to risk assessment in failure mode and effect analysis based on engineering textual data

Wenyan Song,Jianing Zheng

DOI: https://doi.org/10.1080/08982112.2024.2304815

2024-01-21

Quality Engineering

Abstract:Failure Mode and Effect Analysis (FMEA) is a valuable tool for improving the quality of products and service systems. However, traditional FMEA methods require examining various engineering textual materials and attending multiple meetings, which can be time-intensive. Additionally, accurately evaluating the severity (S), occurrence (O), and detection (D) of failure modes is essential to ensure the accuracy of FMEA results. Despite efforts by researchers to improve the efficiency of FMEA, the evaluation of these risk factors (S, O, and D) still relies too heavily on a manual and inefficient process. To address these issues, this paper proposes a machine learning-enabled FMEA approach. This new approach combines the strengths of the BERT (Bidirectional Encoder Representations from Transformers) model in transforming textual failure descriptions into word vectors, the advantages of the VSM (Vector Space Model) in determining semantic similarity between different failure modes, and the merits of TOPSIS based on objective weights in handling multicriteria risk assessment. The proposed approach was applied to an actual case study for failure mode and effect analysis in auto parts processing. Comparisons between the proposed method and conventional FMEA were conducted to demonstrate the effectiveness of the new approach.

engineering, industrial,statistics & probability
A novel FMEA approach based on probabilistic linguistic best-worst method and TOPSIS with application to marine diesel fuel injection system

Qingguo Shi,Yihuai Hu,Guohua Yan

DOI: https://doi.org/10.3233/jifs-230870

2023-06-17

Abstract:The failure mode and effect analysis (FMEA) is an effective tool to analyze risks and potential effects of complex systems, and it is one of the most widely used risk analysis methods for complex systems as there often exists various factors that could affect the operation of the complex systems. Conventional FMEA methods have been limited to using crisp values to represent the assessments, which has been criticized for having many deficiencies. Marine diesel fuel injection system is an important part of marine diesel engine, and its failure could directly affect the performance of the marine diesel engine and even impact the safe operation of the ship. However, little attention has been paid to the FMEA of the marine diesel fuel injection system. To this end, this paper presents a novel FMEA method based on the best-worst method (BWM) and TOPSIS method with probabilistic linguistic term set (PLTS). Firstly, the PLTS is used to represent the uncertain and linguistic judgments of experts. Then, the BWM is extended with PLTS to determine the weights of different elements for FMEA, and the TOPSIS is extended with PLTS to assess and rank different failure modes. Finally, a case study on marine diesel fuel injection is presented, and the most critical failures are identified for improvement measures. The results show that the proposed method could help managers and engineerings identify the most important failure modes for marine diesel fuel injection system.
Correlated FMEA method of complex system with linguistic vagueness

伍晓榕,裘乐淼,张树有,孙良峰,郭传龙

DOI: https://doi.org/10.3785/j.issn.1008-973X.2013.05.007

2013-01-01

Abstract:Considering some inherent shortcomings of the conventional failure mode and effects analysis (FMEA), a correlated FMEA method was proposed for reprioritization of interrelated failure modes with linguistic vagueness. The fuzzy linguistic knowledge in an evaluation of failure mode was quantified by fuzzy set theory, and an effective number of each failure mode was obtained with a fuzzy-modified technique for order preference by similarity to ideal solution (TOPSIS). A digraph of direct relations between failure modes was constructed, and then a matrix of failure influences was gained using decision making trial and evaluation laboratory (DEMATEL) method. The risk evaluation of failure modes in a complex system with linguistic vagueness was completed with obtained causal degree of each failure mode from the matrix of failure influences. The proposed method was applied to safety analysis of the complex centrifugal pump. The results indicated that, compared with the risk priority number (RPN) method and the fuzzy FMEA method, the proposed correlated FMEA method could greatly improve the analysis reliability.
A probabilistic uncertain linguistic approach for FMEA‐based risk assessment

Yingwei Tang,Dequn Zhou,Shichao Zhu,Linhan Ouyang

DOI: https://doi.org/10.1002/qre.3657

2024-09-11

Quality and Reliability Engineering International

Abstract:Failure Mode and Effect Analysis (FMEA) is acknowledged as a beneficial instrument for identifying and mitigating system failures. However, the traditional FMEA method has its limitations. For instance, crisp numbers fail to adequately represent the intricate information and cognitive nuances of experts. Additionally, the conventional approach overlooks the significance of weights assigned to FMEA experts and risk factors (RFs). Furthermore, the simplistic ranking of failure modes in traditional FMEA does not accurately reflect priorities. In light of these drawbacks, this paper introduces an innovative, fully data‐driven FMEA method, leveraging a probabilistic uncertain linguistic term sets (PULTSs) environment and the Weighted Aggregates Sum Product Assessment (WASPAS) method. In the assessment process, PULTSs serve as linguistic tools that express probability distribution, allowing for a more reasonable and precise description of information. To address the issue of weights for RFs, the regret theory and Modified CRITIC method are employed. Subsequently, the WASPAS method is applied to determine the risk rankings of failure modes. To illustrate the feasibility and rationality of this novel FMEA model, the paper includes an example involving the production of Lithium‐ion batteries. To emphasize the excellence of the proposed FMEA model, sensitivity and comparative analyses are carried out.

engineering, industrial, multidisciplinary,operations research & management science
An FMEA model for risk assessment of university sustainability: using a combined ITARA with TOPSIS-AL approach based neutrosophic sets

Sheng-Wei Lin,Huai-Wei Lo

DOI: https://doi.org/10.1007/s10479-023-05250-4

2023-03-06

Abstract:It is necessary to emphasize both the process and results of performance management to find the balance between quality and quantity needed to ensure the sustainable development of universities to make the best use of limited educational resources and meet the diverse needs of students. This study applies failure mode and effects analysis (FMEA) to analyze obstacles to university sustainability by constructing complete risk assessment modes and reference indicators. The neutrosophic set theory was incorporated into the FMEA to account for information uncertainty and asymmetry. A specialist team then evaluated the importance of the risk factors using neutrosophic indifference threshold-based attribute ratio analysis to determine objective weights for the risk factors. Furthermore, the neutrosophic technique for order preference by similarity to the ideal solution based on aspiration level (N-TOPSIS-AL) is employed to aggregate the total risk scores of the failure modes. Using neutrosophic sets to measure truth, falsity, and indeterminacy in the assessment significantly improve the adaptability of the fuzzy theory to real-world problems. The study results indicate that when assessing university affairs management and analyzing possible risks, priority must be given to the occurrence of risks and that the lack of educational facilities is the riskiest item in the specialist assessment. The proposed assessment model can be applied as a basis for university sustainability assessments to accelerate the development of other forward-looking approaches.

Failure mode and effects analysis using intuitionistic fuzzy hybrid TOPSIS approach

A Novel Method for Failure Mode and Effect Analysis Based on the Fermatean Fuzzy Set and Bonferroni Mean Operator

Failure mode and effects analysis using Dempster-Shafer theory and TOPSIS method: Application to the gas insulated metal enclosed transmission line (GIL)

Advanced FMECA Method Based on Intuitionistic 2-Tuple Linguistic Variables and the Triangular Fuzzy Analytic Hierarchy Process

Fusion Assessment of Safety and Security for Intelligent Industrial Unmanned Systems

An Integrated Approach for Failure Mode and Effects Analysis Based on Fuzzy Best-Worst, Relative Entropy, and VIKOR Methods

A novel failure mode and effect analysis method with spherical fuzzy entropy and spherical fuzzy weight correlation coefficient

A method based on q-rung orthopair fuzzy cognitive map and TOPSIS method for failure mode and effect analysis considering risk causal relationships

An Extended TODIM Method with Unknown Weight Information Under Interval-Valued Neutrosophic Environment for FMEA

Fuzzy smart failure modes and effects analysis to improve safety performance of system: Case study of an aircraft landing system

Failure Analysis of Metro Door System Based on Fuzzy TOPSIS

A New Model for Failure Mode and Effect Analysis Integrating Linguistic Z-Numbers and Projection Method

Primary failure mode and effects analysis with function-motion-action hierarchy structure for mechatronic systems

A novel method for weighting decision makers for failure mode and effect analysis under intuitionistic fuzzy environment

Probabilistic Fuzzy System for Evaluation and Classification in Failure Mode and Effect Analysis

A Risk Evaluation and Prioritization Method for FMEA with Prospect Theory and Choquet Integral

A new approach to risk assessment in failure mode and effect analysis based on engineering textual data

A novel FMEA approach based on probabilistic linguistic best-worst method and TOPSIS with application to marine diesel fuel injection system

Correlated FMEA method of complex system with linguistic vagueness

A probabilistic uncertain linguistic approach for FMEA‐based risk assessment

An FMEA model for risk assessment of university sustainability: using a combined ITARA with TOPSIS-AL approach based neutrosophic sets