Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

Automatic Impedance Matching for Three-Stub Waveguide Tuner Based on Space Mapping

Research on Three-Stub Tuners

A three-stub waveguide impedance matching algorithm based on equivalent circuit analysis

A Low-Reflection Tuning Strategy for Three-Stub Waveguides

A Tuning Method for Triple-Stub Tuner Using Knowledge-Based Surrogate Model

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

The design and test of dual/triple-mode bandpass filter based on temporal coupled-mode theory

Tri-band Matching Technique Based on Characteristic Impedance Transformers for Concurrent Tri-Band Power Amplifiers Design

Space-Mapping Based Automatic Design of SIW-Based Directional Coupler with Arbitrary Power Ratio

Tuning space mapping: The state of the art

Propagation Characteristic Analysis and Applications of Spatial Four-Waveguide System

Frequency-Dependent Implicit Space-Mapping Algorithm for Wideband Microwave Prototyping

Rapid Design Optimisation Of Microwave Structures Through Automated Tuning Space Mapping

Tuning Space Mapping Design Framework Exploiting Reduced Electromagnetic Models

Tuning Space Mapping: A Novel Technique for Engineering Design Optimization

Research on High Power Microwave Intelligent Impedance Matching Technology

Accelerated Microwave Design Optimization With Tuning Space Mapping

SMT: A Space-Mapping-Based Tuning Software System for a Post-fabrication Bandpass Filter

An Automatic Design Approach for Microstrip Line Impedance Transformer for Triple-Band Application

Tuning-aided Implicit Space Mapping

Design of the Coupler for Millimeter-Wave Space TWT