Abstract:The rapid development of unmanned aerial vehicles (UAVs) has led to many security problems. In order to prevent UAVs from invading restricted areas or famous buildings, an anti-UAV defense system (AUDS) has been developed and become a research topic of interest. Topics under research in relation to this include electromagnetic interference guns for UAVs, high-energy laser guns, US military net warheads, and AUDSs with net guns. However, these AUDSs use either manual aiming or expensive radar to trace drones. This research proposes a dual-axis mechanism with UAVs automatic tracing. The tracing platform uses visual image processing technology to trace and lock the dynamic displacement of a drone. When a target UAV is locked, the system uses a nine-axis attitude meter and laser rangers to measure its flight altitude and calculates its longitude and latitude coordinates through sphere coordinates to provide drone monitoring for further defense or attack missions. Tracing tests of UAV flights in the air were carried out using a DJI MAVIC UAV at a height of 30 m to 100 m. It was set up for drone image capture and visual identification for tracing under various weather conditions by a thermal imaging camera and a full-color camera, respectively. When there was no cloud during the daytime, the images acquired by the thermal imaging camera and full-color camera provide a high-quality image identification result. However, under dark weather, black clouds will emit radiant energy and seriously affect the capture of images by a thermal imaging camera. When there is no cloud at night, the thermal imaging camera performs well in drone image capture. When the drone is traced and locked, the system can effectively obtain the flight altitude and longitude and latitude coordinate values.

A Data Processing Method of UAV Detection Using Mechanical and Electronical Scanned Radar

Research on the Altitude Measurement of UAV Targets Using a Frequency Scanned Radar

A Smart Radar Signal Processing Solution for Ground-Based UAVs Surveillance.

A Low-Slow-Small UAV Detection Method Based on Fusion of Range Doppler Map and Satellite Map

A Vision-based UAV Tracker Aiming at Aerial Targets

The Design of A Phased Array Radar for Detecting Unmanned Aerial Vehicle

An Adaptive Radar Signal Processor for UAVs Detection with Super-Resolution Capabilities

Realizing Small UAV Targets Recognition via Multi-Dimensional Feature Fusion of High-Resolution Radar

UAV Target Detection under Complex Sky Background

Research on Detection Method of UAV Based on Micro-Doppler Effect

Design of Autonomous Bolt Detection System Based on Quadrotor UAV

Detection and Identification of Low-Slow-Small Rotor Unmanned Aerial Vehicle Using Micro-Doppler Information

A UAV Detection Method Based on Signal Periodicity and Its Implementation on FPGA

A High-resolution Radar Automatic Target Recognition Method for Small UAVs Based on Multi-feature Fusion

Non-Linear Signal Processing methods for UAV detections from a Multi-function X-band Radar

Research on low altitude flying object detection and early warning algorithm based on radar sensor

UAV Detection Using Continuous Wave Radar

A Complete Automatic Target Recognition System of Low Altitude, Small RCS and Slow Speed (LSS) Targets Based on Multi-Dimensional Feature Fusion

Accurate Estimation the Scanning Cycle of the Reconnaissance Radar Based on a Single Unmanned Aerial Vehicle.

Investigation on the low-speed target detection with frame accumulation based on an X band phased array

Development of UAV Tracing and Coordinate Detection Method Using a Dual-Axis Rotary Platform for an Anti-UAV System