Abstract:As wind turbines become larger and move into deeper sea, their operating environment worsen. The torque fluctuation inside the drive chain is aggravated, which leads to the premature failure of the wind turbines. To improve the transmission stability of wind turbines, the mechanical-hydraulic hybrid transmission system (MHHTS) has been applied. However, existing research has issues with structure and hydraulic control. An MHHTS structure was proposed to meet the requirements of structural simplicity and high efficiency, corresponding to the design principles summarized in the article. Based on this structure, we have selected a hydraulic control mode, the constant displacement pump variable displacement motor (CPVM), that satisfies the reasonable utilization of displacement and the stability of control. This mode was chosen by comparing the displacement and pressure variation rules of three hydraulic control modes that meet the maximum power point tracking (MPPT) control principle of the wind turbine. In this study a co-simulation model of a 10 MW MHHTS wind turbine was built using Simulink and AMEsim. The correctness of the structural and control mode ware verified by co-simulation with a uniformly varying wind. Moreover, a method that can suppress fluctuations in output power by controlling the motor displacement was proposed. Different-step winds response analyses were conducted to explore the relationship between the displacement response speed and the output power fluctuations. The non-linear relationship between the displacement and the wind speed can also have an impact on the previous relationship. Finally, the feasibility of the control method was verified through simulation of an actual turbulent wind. These achievements should guarantee the future application of the novel transmission system in wind turbines.

Selection of Excitation Operating Points of 10 MW HTS Exciting Double Stator Direct-Drive Wind Generators Having Single and Double Polarity Inner Stator

Small Signal Stability Analysis and Control of the Wind Turbine with the Direct-Drive Permanent Magnet Generator Integrated to the Grid

Comparison of Dual-Stator Permanent Magnet Machines with Different Rotor Topologies

Design and Comparison of Segmented Armature Windings for Superconducting Wind Turbine Generators with Multiple Converters

A Pole Pair Segment of Oil-cooling Air-Core Stator for a 2 MW Direct-Drive High Temperature Superconducting Wind Power Generator

Operation Control and Space Vector Analysis on Doubly Fed Wind Power Generator

Design of A 10 Mw Dual-Stator Superconducting Permanent Magnet Wind Power Generator

Optimization Study of Poles-slots Combination of Large Capacity Offshore HTS Wind Generator Based on Ansys Maxwell

Design Of A Dual-Stator Superconducting Permanent Magnet Wind Power Generator With Different Rotor Configuration

Electromagnetic Design And Optimization Of Dual-Stator Brushless Doubly-Fed Wind Power Generator With Cage-Barrier Rotor

Optimization of Transposition in Stator Bars of Hydro-Generators

Stepped-shape Field Winding Optimization of a Large Capacity HTS Aircraft Propulsion Machine

Stator tooth shape optimization for double salient hybrid excitation generator based on asymmetric circuit analysis

Design Aspects for Permanent Magnet Superconducting Wind Power Generators

Dual Stator Windings PMSG Fed by Half-Controlled Converters for Wind Power Application

Stator Voltage Oriented Variable-parameter Control Strategy for Wind Turbine Driven Doubly Fed Induction Generator

Optimization study of the main parameters of different types of wind turbine generators

Design and Control of the Mechanical-Hydraulic Hybrid Transmission System in Wind Turbines

Stator Harmonic Current Suppression Strategy for Doubly-fed Wind Power Generation System Influenced by Low-order Harmonic Voltage of Grid

Multi-objective Optimization Design of Hybrid Excitation Double Stator Permanent Magnet Synchronous Machine