Abstract:Particle size and content of RDX are the two main factors that affect the burning stability of RDX-based propellants. However, these effects and the corresponding mechanisms are still controversial. In this work, we investigated the physicochemical processes during burning and the corresponding mechanisms through the technologies of structure compactness analysis on the base of voidage measurement and theoretical interfacial area estimation, apparent burning rate measurement using closed vessel (CV) and extinguished burning surface characterization relying on interrupted closed vessel (ICV) and scanning electron microscope (SEM). The results indicate that the voidage increased with the increase of RDX content and particle size due to the increasing interfacial area and increasing interface gap size, respectively. The apparent burning rate increased with the increase of RDX particle size because of the decreasing RDX specific surface area on the burning surface, which could decrease the heat absorbing rates of the melting and evaporation processes of RDX in the condensed phase. Similarly, the apparent burning rate decreased with the increase of RDX content at pressures lower than around 55 MPa due to the increasing RDX specific surface area. Whereas, an opposite trend could be observed at pressures higher than around 55 MPa, which was attributed to the increasing heat feedback from the gas phase as the result of the increasing propellant energy. For propellants containing very coarse RDX particles, such as 97.8 and 199.4 μm average size, the apparent burning rate increased stably with a flat extinguished surface at pressures lower than around 30 MPa, while increased sharply above around 30 MPa with the extinguished surface becoming more and more rugged as the pressure increased. In addition, the turning degree of <em>u</em>-<em>p</em> curve increased with the increase of coarse RDX content and particle size, and could be reduced by improving the structure compactness.

Effect of RDX content on the agglomeration, combustion and condensed combustion products of an aluminized HTPB propellant

Effect of 2,4-Dihydroxybenzoate Lead/Cupric on Combustion Properties of Al/RDX-CMDB Propellants

Effects of Different Content of Nanomaterials on the Combustion Performance of RDX-CMDB Propellants

Effect of Nano Combustion Modifier on Combustion Properties of Db and Cmdb-Propellant

Reduction of Agglomeration Effect by Aluminum Trihydride in Solid Propellant Combustion

Effect of Al–Li Alloy on the Combustion Performance of AP/RDX/Al/HTPB Propellant

Effects of particle size and content of RDX on burning stability of RDX-based propellants

Effect of RDX on Mechanical and Combustion Property of Variable Burning Rate Gun Propellant

Effect on primary combustion performance of aluminum particle size in fuel-rich propellant with high aluminum content

Effect of HMX Content on Agglomeration and Condensed Phase Combustion Products of AP/HMX/Al/HTPB Propellants

Effect of RDX Particle Size on Properties of CMDB Propellant

Effect of low-concentration RDX dust on solid–liquid mixed fuel characteristics

The Role of HMX Particle Size in the Combustion and Agglomeration of HTPB-based Propellant

Combustion performance modulation and agglomeration inhibition of HTPB propellants by fine Al/oxidizers integration

Molecular Dynamics Study of RDX/AMMO Propellant

Research on the Combustion Properties of Propellants with Low Content of Nano Metal Powders

Unexpected Burning Rate Independence of Composite Propellants on the Pressure by Fine Interfacial Control of Fuel/oxidizer

Effects of Sn-containing intermetallic compounds on the thermal decomposition and ignition properties of RDX and TKX-50

Dynamic Pressure Thermal Analysis of Double-Base Propellants Containing Rdx

Combustion Properties of Composite Propellants Based on Two Kinds of Polyether Binders and Different Oxidizers

Study on Dynamic Impact and Ignition Response Behavior of GAP/PET/RDX Based Propellant