Abstract:The development of high-performance extractants and intensification technologies is crucial for saving energy in the separation of azeotropes by extractive distillation. An effective method for separating azeotropes by extractive distillation using an organic solvent–ionic liquid mixed extractant is proposed. The selectivity and solubility of 96 ionic liquids were calculated based on the conductor-like screening model for real solvents, and the best extractant, 1-ethyl-3-methylimidazolium acetate ([EMIM][AC]), was obtained. The interaction energy, bond length, and independent gradient model based on the Hirshfeld partition between different components and azeotropes were calculated by applying quantum chemistry to analyze the structure–activity relationship between molecules. The results showed that dimethyl sulfoxide has a stronger interaction with methanol than with other organic extractants, [EMIM][AC] + dimethyl sulfoxide is more likely to form hydrogen bonds with methanol, the O atom in dimethyl sulfoxide mainly forms hydrogen bonds with the H atom in methanol, and the H atom in [EMIM][AC] mainly forms hydrogen bonds with the O atom of methanol. In addition, a process for separating acetone–methanol by extractive distillation using a mixed extractant was designed. The minimum total annual cost (TAC) was considered as the objective function, and a sequential iterative optimization algorithm was used to optimize the separation process and obtain the optimal operating parameters. The results showed that the TAC of the extractive distillation process of [EMIM][AC] + dimethyl sulfoxide mixed extractant was 15.00% lower than that of [EMIM][AC] + N , N -dimethylformamide and 42.10% lower than that of [EMIM][AC] + N -methylpyrrolidone. In the extractive distillation process, the pollutant gas emissions of [EMIM][AC] + dimethyl sulfoxide decreased by 43.29% compared with those of [EMIM][AC] + N -methylpyrrolidone and 7.87% compared with those of [EMM][AC] + N , N -dimethylformamide. Finally, an energy-saving process of vapor-recompression extractive distillation was explored. The results showed that the TAC of vapor-recompression-assisted extractive distillation was 3.98% lower than that of [EMIM][AC] + dimethyl sulfoxide and that the pollutant gas emissions were 20.28% less than those of [EMIM][AC] + dimethyl sulfoxide. This study on the structure–activity relationship of mixed extractants and process optimization provides theoretical guidance for the separation of azeotropes in the industry.

Separation of Azeotropic Mixture (acetone + N-Heptane) by Extractive Distillation with Intermediate and Heavy Boiling Entrainers: Vapour-liquid Equilibrium Measurements and Correlation

Separation of Azeotropic Mixtures (ethanol and Water) Enhanced by Deep Eutectic Solvents

Isobaric Vapor–Liquid Equilibria for Water + Acetic Acid + 1-Ethyl-3-methylimidazolium Diethylphosphate at 101.32 Kpa

Separation of the Azeotropic Mixture Methanol and Toluene Using Extractive Distillation: Entrainer Determination, Vapor–Liquid Equilibrium Measurement, and Modeling

Vapor–Liquid Equilibrium Experiment for Butanone and Ethyl Acetate at 101.3 kPa

Separation of Acetone–tetrahydrofuran Azeotropic Mixture by Continuous Extractive Distillation

Thermodynamic analysis and azeotropic distillation simulation for acetic acid-water-butyl acetate system

Study on the Separation of Binary Azeotropic Mixtures by Continuous Extractive Distillation

Isobaric Vapour-Liquid Equilibrium for Binary and Ternary Systems of Isopropyl Acetate, Isopropyl Alcohol, Acetic Acid and Water at 101.3 Kpa

Separation of Ethyl Acetate and Ethanol Azeotropic System by Acetate-Based Ionic Liquid

Vapor-liquid equilibrium experiment and extractive distillation process design for the azeotrope ethyl propionate n-propanol using ionic liquid

Design of extractive distillation process with mixed entrainer

Vapor–Liquid Equilibrium for Ethyl Acetate + Acetonitrile with Acetate-Based Ionic Liquids as Entrainers at 101.3 kPa and Analysis of the Separation Mechanism

Mechanism analysis and process optimization of acetone–methanol azeotrope separation using 1-ethyl-3-methylimidazolium acetate based mixed extractants

Phase behaviour and internal mechanism of action of two solvents for the separation of butanol isomers from industrial wastewater

Insight into separation of azeotrope in wastewater to achieve cleaner production by extractive distillation and pressure-swing distillation based on phase equilibrium

Simulation of Acetophenone and Α-Phenylethanol Separation by Extractive Distillation

Determination and correlation of LLE data for n-hexane, ethyl acetate and different extractants

Separation mechanism and thermodynamic phase behavior of n-propanol/p-xylene azeotrope from petrochemical wastewater by green solvents

Ternary (Liquid + Liquid) Equilibrium Experiment and Thermodynamic Modeling for Solvents ( p -Xylene, Mesityl Oxide) + 2-Butanone + Water at 298.2, 303.2, and 313.2 K under 101.3 kPa

Liquid–Liquid Equilibrium Measurement and Thermodynamic Modeling for Ternary Systems of 1,3-Propanediol + 2-Propyl-1-heptanol + Extractants at 298.2 K