Abstract:The design and construction of high strength hydrogels is a widely discussed topic in hydrogel research. In this study, we combined three toughening strategies, including dual network, oriented structure construction and nanophase doping, to develop an alginate/polyacrylamide (PAM)/modified titanium dioxide fiber (TiO2 NF@PAM) dual network composite hydrogel prepared via syringe. The effects of different preparation methods, AM/Alginate ratios, inorganic doping phases and TiO2 NF@PAM/AM ratios on the mechanical properties of composite hydrogels were investigated. The study found that the alginate hydrogel prepared by syringe exhibited superior axial orientation and achieved a tensile strength of (1091 ± 46) kPa. And the composite hydrogel doped with 0.2 wt% TiO2 NF@PAM had a tensile strength of (1006 ± 64) kPa, which was higher than that of the composite hydrogel doped with 0.2 wt% TiO2 nanoparticles (976 ± 66) kPa. The highest tensile strength (1120 ± 67) kPa and elongation at break (182 ± 8) % were achieved when the ratio of TiO2 NF@PAM/AM was 0.6 wt%. The force applied to the gel solution in the syringe affects the orientation of the polymer chains and TiO2 NF@PAM within the gel, which subsequently impacts the mechanical properties of the hydrogel. Therefore, we further investigated the mechanical properties of composite hydrogels under varying propulsion speeds, syringe diameters, and syringe lengths. It was observed that the gel solution's shear strength increased as the syringe diameter decreased. The resulting composite hydrogels were better oriented and had improved mechanical properties. The composite hydrogels' tensile strength peaked at (1117 ± 47) kPa when the syringe advance rate was between 1-7 mL/min. The mechanical properties of the hydrogels were optimal when the syringe length was 30 mm, with a maximum tensile strength of (1131 ± 67) kPa and a tensile ratio of (166 ± 5) %. This study demonstrates the viability of integrating three distinct strengthening methodologies to generate hydrogels of considerable strength. Furthermore, the Alginate/PAM/TiO2 NF@PAM composite hydrogels possess remarkable potential as adaptable, wearable sensors due to their exemplary mechanical properties, knittability, and conductivity.

Anisotropic Nanocomposite Hydrogels with Enhanced Actuating Performance Through Aligned Polymer Networks

Highly strong and sensitive bilayer hydrogel actuators enhanced by cross-oriented nanocellulose networks

Synthesis of Deformable Hydrogel Composites Based on Janus Bilayer Multi-Walled Carbon Nanotubes/host-Guest Complex Structure

Curving-Stretching Induced Alignment in Hydrogel Actuators for Enhanced Grip Strength and Rapid Response

Biotissue‐Inspired Anisotropic Carbon Fiber Composite Hydrogels for Logic Gates, Integrated Soft Actuators, and Sensors with Ultra‐High Sensitivity

4D printing of biomimetic anisotropic self-sensing hydrogel actuators

Multi-stimuli responsive, shape deformation, and synergetic biomimetic actuator

Anisotropic and self-healing hydrogels with multi-responsive actuating capability

Supramolecular Ionic Polymer/carbon Nanotube Composite Hydrogels with Enhanced Electromechanical Performance

Robust and rapid responsive organic-inorganic hybrid bilayer hydrogel actuators with silicon nanoparticles as the cross-linker

An Anisotropic Hydrogel by Programmable Ionic Crosslinking for Sequential Two-Stage Actuation under Single Stimulus

Progress of Biomimetic Anisotropic Poly(N-isopropylacrylamide) Intelligent Response Actuators

Hydrogen bonding induced enhancement for constructing anisotropic sugarcane composite hydrogels

Robust Hydrogel Actuators Functioning in Multi‐Environments Enabled by Thermo‐Responsive Polymer Nanoparticle Coatings on Hydrogel Surfaces

Actuation Behavior of PNIPAM-based Bilayer Hydrogel Regulated by Polyvinyl Alcohol Polymer Film

3D-Printed Hydrogels with High-Strength and Anisotropy Mediated by Chain Rigidity

Asymmetric bilayer CNTs-elastomer/hydrogel composite as soft actuators with sensing performance

Bio-inspired Hydrogel Actuator with Rapid Self-strengthening Behavior

An Electrospinning Anisotropic Hydrogel with Remotely-Controlled Photo-Responsive Deformation and Long-Range Navigation for Synergist Actuation

In-situ polymerization for mechanical strong composite actuators based on anisotropic wood and thermoresponsive polymer

Design and construction of high strength double network hydrogel with flow-induced orientation