Metantenna Design with One‐dimensional Holographic Concept
Ziwei Li,Wenjie Cui,Ruipeng Liu,Mengjun Wang,Chao Fan,Hongxing Zheng,Erping Li
DOI: https://doi.org/10.1002/mmce.22536
IF: 1.987
2021-01-01
International Journal of RF and Microwave Computer-Aided Engineering
Abstract:In this paper, metasurface antenna (metantenna) with one-dimensional holographic concept is proposed and an example of producing 50 degrees radiation beam angle at 16 GHz is taken to certify the metantenna operating principle. We first introduce one-dimensional holographic theory to simplify the metasurface design. By this means, compared with the traditional two-dimensional metantenna, the integral structure has fewer unit cells, simpler structure and the beam-tilt is achieved as well. Simultaneously, to feed the metasurface above efficiently, the tapered microstrip line is modified by adding a sloping metal strip as a plane-wave surface wave launcher, thus obtaining a smooth transition from Quasi transverse electromagnetic wave to transverse magnetic wave and a broad frequency band of impendence matching. A prototype is fabricated and tested at last. The measured radiation beam angle is 49 degrees at 16 GHz, which approximates to the desired beforehand. On the other hand, this metantenna has a beam scanning angle of 24 degrees to 63 degrees from 13 to 17.5 GHz. The gain is about 13 to 15 dBi and the half power beam width is about 9 degrees in the above frequency range. It has features of stable high gain, narrow beamwidth and high radiation efficiency.