Abstract:A preliminary experiment for microwave thorax imaging is conducted. A dual-band symmetrical dipole antenna is designed for microwave thorax imaging. It operates at 433 MHz and 915 MHz in Industrial, Scientific and Medical (ISM) Band. It is compact and low-profile with a size of 30 mm x 20 mm x 3mm. Short ended and triangular structures are applied to tune low and high frequency modes and enlarge bandwidth. The antenna radiates most power towards in-water direction. The antenna is then fabricated and measured. The measured reflection coefficients verify the antenna design. A rectangular water tank mimicking human thorax is built for experiments. Sixteen antennas are attached to the side wall with uniform spacing. Each antenna acts as transmitter alternately and other antennas act as receivers. Cylindrical objects are placed in water as imaging targets. Sixteen by sixteen S-parameter matrices are measured for reconstruction with the help of switch matrix and vector network analyzer (VNA). A One-Step Supervised Descent Method (SDM) is used for reconstruction. An average descent direction is trained before reconstruction. During the training stage a plastic graduated cylinder whose diameter is 52 mm is placed in water as training object. The object is placed on a 22 cm x 12 cm grid with 1 cm grid size. The S-parameter matrix is measured at each position and 299 training samples are acquired in total. The average descent direction is trained based on these training samples. In the testing stage, four cylindrical objects with circular, triangular, square and hexagonal section are fabricated by 3-D printing. Each target is separately put in water in single-object testing. With One-Step Measurement-Trained SDM, the position and size of the cylinder can be qualitatively reconstructed. This measurement-trained approach takes the characteristics of measurement environment into consideration through the training stage. The reconstruction results verify the feasibility of One-Step SDM in microwave thorax imaging.

A Low-Profile Compact Dual-Band L-Shape Monopole Antenna for Microwave Thorax Monitoring

A Compact Low-profile Wideband Loop Antenna for Microwave Thorax Monitoring

A Wideband Circular Polarization Implantable Antenna for Health Monitor Microsystem

A Compact Dual-Band Folded-Cavity Antenna for Microwave Biomedical Imaging Applications

Study on Microwave Thorax Imaging for Human Respiration Monitoring

A Microwave Thorax Imaging System Based on Symmetrical Dipole Antenna and One-Step Supervised Descent Method

Design of Flexible Dual‐band Antenna and Metamaterial Structure for Wearable Body Area Network

A Preliminary Experiment Based on One-step Measurement-trained Supervised Descent Method for Microwave Thorax Imaging

A miniaturized flexible implantable antenna with metamaterial resonators for biomedical applications

Compact Dual-Polarized Cavity-Backed Antenna With Wideband Performance for Deep Torso Imaging

Investigation of SAR Reduction Using Flexible Antenna with Metamaterial Structure in Wireless Body Area Network

Design of Wideband and Flexible Implantable Antenna for Wireless Medical Application

A Preliminary Experiment for Microwave Thorax Imaging Based on One-Step Gauss Newton Method

A novel dual-band defected ground structure wearable microstrip patch antenna for breast tumor detection in biomedical applications

Miniaturized Dual Band Implantable Antenna for Implanted Biomedical Devices

Electromagnetic Performances Analysis of an Ultra-wideband and Flexible Material Antenna in Microwave Breast Imaging: To Implement A Wearable Medical Bra

A Compact Dual-Band Metasurface-Based Antenna for Wearable Medical Body-Area Network Devices

A Miniaturized Coplanar Waveguide-fed Antenna for Implantable Application at ISM Band

Low Profile Orthomode Full-duplex Antenna for Wearable Biomedical Communication

Design of a Compact Dual Polarized Wearable Antenna with Spatial Diversity Reception for Into-Body Communications

Compact triple-band implantable antenna for multitasking medical devices