Abstract:The catalytic conversion of dinitrogen (N-2) into ammonia under ambient conditions represents one of the Holy Grails in sustainable chemistry. As a potential alternative to the Haber-Bosch process, the electrochemical reduction of N-2 to NH3 is attractive owing to its renewability and flexibility, as well as its sustainability for producing and storing value-added chemicals from the abundant feedstock of water and nitrogen on earth. However, owing to the kinetically complex and energetically challenging N-2 reduction reaction (NRR) process, NRR electrocatalysts with high catalytic activity and high selectivity are rare. In this contribution, as a proof-of-concept, we demonstrate that both the NH3 yield and faradaic efficiency (FE) under ambient conditions can be improved by modification of the hematite nanostructure surface. Introducing more oxygen vacancies to the hematite surface renders an improved performance in NRR, which leads to an average NH3 production rate of 0.46 mu g h(-1) cm(-2) and an NH3 FE of 6.04 % at -0.9 V vs. Ag/AgCl in 0.10 m KOH electrolyte. The durability of the electrochemical system was also investigated. A surprisingly high average NH3 production rate of 1.45 mu g h(-1) cm(-2) and a NH3 FE of 8.28 % were achieved after the first 1 h chronoamperometry test. This is among the highest FEs reported so far for non-precious-metal catalysts that use a polymer-electrolyte-membrane cell and is much higher than the FE of precious-metal catalysts (e.g., Ru/C) under comparable reaction conditions. However, the NH3 yield and the FE dropped to 0.29 mu g h(-1) cm(-2) and 2.74 %, respectively, after 16 h of chronoamperometry tests, which indicates poor durability of the system. Our results demonstrate the important role that the surface states of transition-metal oxides have in promoting electrocatalytic NRR under ambient conditions. This work may spur interest towards the rational design of electrocatalysts as well as electrochemical systems for NRR, with emphasis on the issue of stability.

The Removal of Inevitable NOx Species in Catalysts and the Selection of Appropriate Membrane for Measuring Electrocatalytic Ammonia Synthesis Accurately

Interaction of Ammonia with Nafion and Electrolyte in Electrocatalytic Nitrogen Reduction Study

Regulating Interfacial Microenvironment in Aqueous Electrolyte via a N2 Filtering Membrane for Efficient Electrochemical Ammonia Synthesis

Evaluation of Electrocatalytic Activity of Noble Metal Catalysts Toward Nitrogen Reduction Reaction in Aqueous Solutions under Ambient Conditions

Heterogeneous Electrocatalysts Design for Nitrogen Reduction Reaction under Ambient Conditions

Selective Electrochemical Reduction of Nitrogen to Ammonia by Adjusting the Three-Phase Interface

Recent progress and strategies on the design of catalysts for electrochemical ammonia synthesis from nitrate reduction

Electrocatalytic Nitrate Reduction: Selectivity at the Crossroads Between Ammonia and Nitrogen

Pre‐Adsorbed H‐Assisted N2 Activation on Single‐Atom Cadmium‐O5 Decorated In2O3 for Efficient NH3 Electrosynthesis

Electrocatalytic Nitrogen Reduction Reaction Under Ambient Condition: Current Status, Challenges, And Perspectives

Highly Selective Electrochemical Reduction Of Dinitrogen To Ammonia At Ambient Temperature And Pressure Over Iron Oxide Catalysts

Comprehensive understanding of the thriving electrocatalytic nitrate/nitrite reduction to ammonia under ambient conditions

Research Progress on Cu-Based Catalysts for Electrochemical Nitrate Reduction Reaction to Ammonia

Efficient Electrochemical Conversion of Nitric Oxide to Ammonia Using a Porous Nickel Catalyst in a Membrane Electrode Assembly Electrolyzer

Membraneless Electrochemical Synthesis Strategy toward Nitrate-to-Ammonia Conversion

Membranes Matter: Preventing Ammonia Crossover during Electrochemical Ammonia Synthesis

The Pitfalls in Electrocatalytic Nitrogen Reduction for Ammonia Synthesis

High-Selective Microbial Electrocatalytic Ammonia Synthesis from Nitrite: Unlocking Electron Allocation Mechanisms in Controllable Biocatalysts

Recent Advances in Electrocatalytic Nitrogen Reduction to Produce Ammonia Under Ambient Conditions

Development of Electrocatalysts for Efficient Nitrogen Reduction Reaction under Ambient Condition

Recent Progress on Catalysts Towards Electrocatalytic Nitrogen Reduction Reaction